mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "ckbb ckbb" <ckbroadbus@hotmail.com>
To: greg@kroah.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: USB device not accepting new address=2 (error=-19)
Date: Wed, 20 Aug 2003 10:01:20 -0400	[thread overview]
Message-ID: <BAY1-F130ok1Bkfkll10000c83b@hotmail.com> (raw)

yes it is coustomised board and ISP1161A host controller is connected to a 
fpga device which is on the PCI bus. Infact it is one of the general purpose 
io (gpio-23) to which usb interrupt line is connected and gpio is programmed 
as an interrupt. I am getting the 'sof' interrupt continuously (at every 
1msec) and I can see the corresponding interrupt count in /proc/interrupts 
is incrementing accordingly.

Regarding hc 1161a, I have been told by phillips factory people that the 
driver is working fine with the x86 platform. I did a port to the powerpc 
platform.


>From: Greg KH <greg@kroah.com>
>To: ckbb ckbb <ckbroadbus@hotmail.com>
>CC: linux-kernel@vger.kernel.org
>Subject: Re: USB device not accepting new address=2 (error=-19)
>Date: Tue, 19 Aug 2003 16:50:12 -0700
>
>On Tue, Aug 19, 2003 at 07:33:32PM -0400, ckbb ckbb wrote:
> > I am stuck with the following error. I really appreciate any help for 
>this
> > problem. May be it is known bug in the usb stack.
> >
> > I am using linux2.4.21, powerpc processor, phillips 1161a host 
>controller
> >
> > I am getting interrupts & hardware seems to be OK. I have configured 
>EHCI &
> > OHCI, scsi, usb mass storage in the kernel configuration.
> >
> >
> > usb.c: new USB bus registered, assigned bus number 1
> > Product: USB OHCI Root Hub
> > SerialNumber: c7911000
> > hub.c: USB hub found
> > hub.c: 1 port detected
> > hcd_1161.c : usb devices found..
> > usbutil: USB int. status bits cleared 0x00060000
> > usbutil: USB interrupt.1 Enabled ox00020000
> > ISP116x_HCD Initialization Successful
> >
> > usb.c: USB device not accepting new address=2 (error=-19)
> >
> > usb.c: USB device not accepting new address=3 (error=-19)
>
>Looks like a pci interrupt routing issue.  Is the usb host controller
>actually getting interrupts?
>
>Is this a custom motherboard, or is it a Apple machine?
>
>Odds are it's a bug in the hcd_1161 driver as almost no one uses that
>driver and I doubt it is up to date.
>
>thanks,
>
>greg k-h

_________________________________________________________________
<b>MSN 8:</b>  Get 6 months for $9.95/month 
http://join.msn.com/?page=dept/dialup


             reply	other threads:[~2003-08-20 14:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-08-20 14:01 ckbb ckbb [this message]
2003-08-20 15:55 ` Greg KH
  -- strict thread matches above, loose matches on Subject: below --
2003-08-19 23:33 ckbb ckbb
2003-08-19 23:50 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BAY1-F130ok1Bkfkll10000c83b@hotmail.com \
    --to=ckbroadbus@hotmail.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome