From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750818AbVHQFF3 (ORCPT ); Wed, 17 Aug 2005 01:05:29 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750823AbVHQFF3 (ORCPT ); Wed, 17 Aug 2005 01:05:29 -0400 Received: from bay103-f6.bay103.hotmail.com ([65.54.174.16]:41393 "EHLO hotmail.com") by vger.kernel.org with ESMTP id S1750818AbVHQFF2 (ORCPT ); Wed, 17 Aug 2005 01:05:28 -0400 Message-ID: X-Originating-IP: [65.54.174.207] X-Originating-Email: [jonschindler@hotmail.com] From: "Jon Schindler" To: linux-kernel@vger.kernel.org Subject: powernow-k8 cpufreq driver problems (fails to load on MSI k8n neo2 w/3500+) Date: Wed, 17 Aug 2005 01:05:25 -0400 Mime-Version: 1.0 Content-Type: text/plain; format=flowed X-OriginalArrivalTime: 17 Aug 2005 05:05:27.0621 (UTC) FILETIME=[486E8750:01C5A2E9] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I have two machines with similar specs (same motherboard and bios version), and one works fine with the cpufreq driver while the other machine is giving me the following messages below. powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4) cpufreq-core: trying to register driver powernow-k8 cpufreq-core: adding CPU 0 powernow-k8: register performance failed: bad ACPI data powernow-k8: BIOS error - no PSB or ACPI _PSS objects cpufreq-core: initialization failed cpufreq-core: no CPU initialized for driver powernow-k8 cpufreq-core: unregistering CPU 0 I have done roughly 8 hours of google searching and research, have tried various kernel options, tried updating to the latest kernel, tried reverting to an earlier bios, but nothing seems to work. At this point, I think there may be an issue with the kernel. However, it doesn't make sense that the bios and powernow would work with a bleeding edge dual core processor, but not work with an older processor model on the same motherboard. I've obviously run out of ideas. If anyone has any suggestions or ideas, (or even better, a patch) I would really appreciate it. Strangely enough, the machine that works with powernow has a leading edge athlon 4800+, while the one that is broken is running an Athlon 3500+. Anyway, here are the details. Machine 1: (works with powernow) OS: Fedora Core 4 64 bit version, kernel 2.6.12.3 AMD Athlon 4800+ 3GB of RAM MSI K8N Neo2 Platinum motherboard with bios version 1.9 Nvidia Geforce 6800 GT video card (AGP) 3 hard drives, 2 SATA, 1 ATA ATI Tv Wonder PCI 1 Plextor DVD burner Machine 2:(fails to load powernow driver) OS: Fedora Cord 4 32 bit version, kernel 2.6.12.4 AMD Athlon 3500+ (venice core, stepping 2) MSI K8N Neo2 Platinum motherboard with bios version 1.9 1 GB of RAM Trident PCI video card (it's a file/mail server) 4 SATA drives in a RAID 5 array (data drives) 2 ATA drives in a RAID 1 array (boot drive) 1 NEC DVD RW (model 3504?) Here is the dmesg for machine 1: Bootdata ok (command line is ro root=LABEL=/1 rhgb quiet) Linux version 2.6.12.3 (root@localhost) (gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)) #2 SMP Thu Jul 21 03:48:06 CDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f8f30 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x00000000bfff7b80 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff7ac0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 786416 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 782320 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) Checking aperture... CPU 0: aperture @ e0000000 size 256 MB Built 1 zonelists Kernel command line: ro root=LABEL=/1 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2411.790 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 3088432k/3145664k available (2361k kernel code, 56304k reserved, 1585k data, 220k init) Calibrating delay loop... 4784.12 BogoMIPS (lpj=2392064) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Node 0 -> Core 0 Using local APIC timer interrupts. Detected 12.561 MHz APIC timer. Booting processor 1/1 rip 6000 rsp ffff810004155f58 Initializing CPU#1 Calibrating delay loop... 4816.89 BogoMIPS (lpj=2408448) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Node 0 -> Core 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02 CPU 1: Syncing TSC to CPU 0. Brought up 2 CPUs CPU 1: synchronized TSC with CPU 0 (last diff -77 cycles, maxerr 565 cycles) time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4800-0x487f has been reserved pnp: 00:00: ioport range 0x4880-0x48ff has been reserved IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1124235674.328:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 6Y250P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive hdd: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 NFORCE3-250-SATA2: IDE controller at PCI slot 0000:00:09.0 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 23 (level, high) -> IRQ 177 NFORCE3-250-SATA2: chipset revision 162 NFORCE3-250-SATA2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250-SATA2: 0000:00:09.0 (rev a2) UDMA133 controller NFORCE3-250-SATA2: 100% native mode on irq 177 ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:DMA, hdh:pio Probing IDE interface ide2... Probing IDE interface ide3... hdg: WDC WD3200SD-01KNB0, ATA DISK drive ide3 at 0x960-0x967,0xb62 on irq 177 NFORCE3-250-SATA: IDE controller at PCI slot 0000:00:0a.0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 185 NFORCE3-250-SATA: chipset revision 162 NFORCE3-250-SATA: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250-SATA: 0000:00:0a.0 (rev a2) UDMA133 controller NFORCE3-250-SATA: 100% native mode on irq 185 ide4: BM-DMA at 0xb000-0xb007, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xb008-0xb00f, BIOS settings: hdk:DMA, hdl:pio Probing IDE interface ide4... hdi: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide4 at 0x9f0-0x9f7,0xbf2 on irq 185 Probing IDE interface ide5... hdk: WDC WD740GD-00FLA2, ATA DISK drive ide5 at 0x970-0x977,0xb72 on irq 185 Probing IDE interface ide2... hda: max request size: 1024KiB hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hdg: max request size: 1024KiB hdg: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63 hdg: cache flushes supported hdg: hdg1 hdg2 hdg3 hdk: max request size: 1024KiB hdk: 145226112 sectors (74355 MB) w/8192KiB Cache, CHS=16383/255/63 hdk: cache flushes supported hdk: hdk1 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33) ide-floppy driver 0.99.newide hdi: No disk in drive hdi: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 256Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.40.4) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xa (1300 mV) powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc (1250 mV) powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe (1200 mV) powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0x10, vid 0xa ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 220k freed input: AT Translated Set 2 keyboard on isa0060/serio0 SCSI subsystem initialized kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PS2++ Logitech Wheel Mouse on isa0060/serio1 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.32. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device 0000:00:05.0 to 64 eth0: forcedeth.c: subsystem: 01462:0250 bound to 0000:00:05.0 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 201 r8169: NAPI enabled eth1: Identified chip type is 'RTL8169s/8110s'. eth1: RTL8169 at 0xffffc20000006000, 00:11:09:8f:4f:a4, IRQ 201 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 209 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 50646 usecs intel8x0: clocking to 46900 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 217 bttv0: Bt878 (rev 2) at 0000:02:0a.0, irq: 217, latency: 32, mmio: 0xfdeff000 bttv0: detected: ATI TV Wonder [card=63], PCI subsystem ID is 1002:0001 bttv0: using: ATI TV-Wonder [card=63,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=19 bttv0: i2c: checking for MSP34xx @ 0x80... found msp34xx: init: chip=MSP3430G-A4 +nicam +simple +simpler +radio mode=simpler msp34xxg: daemon started bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 2-0060: type set to 19 (Temic PAL* auto (4006 FN5)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:02:0a.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 217 bt878(0): Bt878 (rev 2) at 02:0a.1, irq: 217, latency: 32, memory: 0xfdefe000 ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 23 (level, high) -> IRQ 177 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 EHCI USB 2.0 Controller ehci_hcd 0000:00:02.2: reset hcs_params 0x102488 dbg=1 cc=2 pcc=4 !ppc ports=8 ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 1 0 ehci_hcd 0000:00:02.2: reset hcc_params a082 caching frame 256/512/1024 ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: capability 0001 at a0 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: irq 177, io mem 0xfe02d000 ehci_hcd 0000:00:02.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 ehci_hcd 0000:00:02.2: supports USB remote wakeup usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: nVidia Corporation nForce3 EHCI USB 2.0 Controller usb usb1: Manufacturer: Linux 2.6.12.3 ehci_hcd usb usb1: SerialNumber: 0000:00:02.2 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0000 ehci_hcd 0000:00:02.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: nVidia Corporation CK8S USB Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 185, io mem 0xfe02f000 ohci_hcd 0000:00:02.0: resetting from state 'reset', control = 0x600 ohci_hcd 0000:00:02.0: OHCI controller state ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH ohci_hcd 0000:00:02.0: fminterval a7782edf ohci_hcd 0000:00:02.0: hcca frame #0003 ohci_hcd 0000:00:02.0: roothub.a 01000204 POTPGT=1 NPS NDP=4 ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:02.0: supports USB remote wakeup usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: nVidia Corporation CK8S USB Controller usb usb2: Manufacturer: Linux 2.6.12.3 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists ohci_hcd 0000:00:02.0: created debug files ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: nVidia Corporation CK8S USB Controller (#2) ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 193, io mem 0xfe02e000 ohci_hcd 0000:00:02.1: resetting from state 'reset', control = 0x600 hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:02.2: port 6 low speed --> companion ohci_hcd 0000:00:02.1: OHCI controller state ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3 ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:02.1: intrstatus 0x00000044 RHSC SF ohci_hcd 0000:00:02.1: intrenable 0x8000000a MIE RD WDH ohci_hcd 0000:00:02.1: fminterval a7782edf ohci_hcd 0000:00:02.1: hcca frame #0003 ohci_hcd 0000:00:02.1: roothub.a 01000204 POTPGT=1 NPS NDP=4 ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00010301 CSC LSDA PPS CCS ohci_hcd 0000:00:02.1: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:02.1: supports USB remote wakeup usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: nVidia Corporation CK8S USB Controller (#2) usb usb3: Manufacturer: Linux 2.6.12.3 ohci_hcd usb usb3: SerialNumber: 0000:00:02.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: global over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: no over-current condition exists ohci_hcd 0000:00:02.1: created debug files ehci_hcd 0000:00:02.2: GetStatus port 6 status 003402 POWER OWNER sig=k CSC hub 1-0:1.0: port_wait_reset: err = -107 hub 2-0:1.0: state 5 ports 4 chg 0000 evt 0000 hub 3-0:1.0: state 5 ports 4 chg 0000 evt 0000 ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1250 $ Ben Collins ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 225 PCI: Via IRQ fixup for 0000:02:0c.0, from 11 to 1 ohci_hcd 0000:00:02.0: suspend root hub ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[225] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: new low speed USB device using ohci_hcd and address 2 ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: skipped 1 descriptor after interface usb 3-3: default language 0x0409 usb 3-3: new device strings: Mfr=3, Product=1, SerialNumber=2 usb 3-3: Product: Back-UPS ES 500 FW:801.e5.D USB FW:e5 usb 3-3: Manufacturer: APC usb 3-3: SerialNumber: JB0451044605 usb 3-3: hotplug usb 3-3: adding 3-3:1.0 (config #1, interface 0) usb 3-3:1.0: hotplug usbhid 3-3:1.0: usb_probe_interface usbhid 3-3:1.0: usb_probe_interface - got id drivers/usb/core/file.c: looking for a minor, starting at 96 hiddev96: USB HID v1.10 Device [APC Back-UPS ES 500 FW:801.e5.D USB FW:e5] on usb-0000:00:02.1-3 hub 3-0:1.0: state 5 ports 4 chg 0000 evt 0008 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00007aa441] NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80492340(lo) IPv6 over IPv4 tunneling driver nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 201 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:14:03 PDT 2005 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. hdi: No disk in drive cdrom: open failed. EXT3 FS on hdg1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdg2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Linux Kernel Card Services options: [pci] [cardbus] [pm] w83627hf 3-0290: Reading VID from GPIO5 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready eth0: no IPv6 routers present /dev/vmmon[2887]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[2887]: Module vmmon: initialized /dev/vmnet: open called by PID 2921 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth1: peer interface eth1 not found, will wait for it to come up bridge-eth1: attached /dev/vmnet: open called by PID 2930 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened Here is the dmesg for machine 2: Linux version 2.6.12.4 (root@mail) (gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)) #1 Tue Aug 16 20:21:55 CDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f5040 On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f8f30 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7ac0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 3 cpufreq.debug=7 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 CPU 0 irqstacks, hard=c0487000 soft=c0486000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2210.713 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 903160k/917504k available (2644k kernel code, 13804k reserved, 720k data, 216k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4374.52 BogoMIPS (lpj=2187264) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 1810k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb840, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:02:07.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4800-0x487f has been reserved pnp: 00:00: ioport range 0x4880-0x48ff has been reserved speedstep-lib: x86: f, model: 2f speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1124235809.386:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: AGP aperture is 32M @ 0xfa000000 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD300BB-00AUA1, ATA DISK drive hdd: WDC WD205BA, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hdc: max request size: 128KiB hdc: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(100) hdc: cache flushes not supported hdc: hdc1 hdc2 hdc3 hdd: max request size: 128KiB hdd: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=39770/16/63, UDMA(66) hdd: cache flushes not supported hdd: hdd1 hdd2 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 131072 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4) cpufreq-core: trying to register driver powernow-k8 cpufreq-core: adding CPU 0 powernow-k8: register performance failed: bad ACPI data powernow-k8: BIOS error - no PSB or ACPI _PSS objects cpufreq-core: initialization failed cpufreq-core: no CPU initialized for driver powernow-k8 cpufreq-core: unregistering CPU 0 ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 216k freed SCSI subsystem initialized libata version 1.11 loaded. sata_nv version 0.6 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 23 (level, high) -> IRQ 177 PCI: Setting latency timer of device 0000:00:09.0 to 64 ata1: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC800 irq 177 ata2: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC808 irq 177 input: AT Translated Set 2 keyboard on isa0060/serio0 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:203f ata1: dev 0 ATA, max UDMA/100, 625142448 sectors: lba48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/100 scsi0 : sata_nv ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:203f ata2: dev 0 ATA, max UDMA/100, 625142448 sectors: lba48 ata2: dev 0 configured for UDMA/100 scsi1 : sata_nv Vendor: ATA Model: WDC WD3200SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD3200SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 185 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata3: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xB000 irq 185 ata4: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xB008 irq 185 ata3: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:203f ata3: dev 0 ATA, max UDMA/100, 625142448 sectors: lba48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata3: dev 0 configured for UDMA/100 scsi2 : sata_nv ata4: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:203f ata4: dev 0 ATA, max UDMA/100, 625142448 sectors: lba48 ata4: dev 0 configured for UDMA/100 scsi3 : sata_nv Vendor: ATA Model: WDC WD3200SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdc: drive cache: write back sdc: sdc1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD3200SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdd: drive cache: write back sdd: sdd1 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com md: raid1 personality registered as nr 3 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 6996.000 MB/sec raid5: using function: pIII_sse (6996.000 MB/sec) md: raid5 personality registered as nr 4 md: Autodetecting RAID arrays. md: autorun ... md: considering sdd1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: hdd1 has different UUID to sdd1 md: hdc2 has different UUID to sdd1 md: created md1 md: bind md: bind md: bind md: bind md: running: raid5: device sdd1 operational as raid disk 3 raid5: device sdc1 operational as raid disk 2 raid5: device sdb1 operational as raid disk 1 raid5: device sda1 operational as raid disk 0 raid5: allocated 4212kB for md1 raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 fd:0 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdb1 disk 2, o:1, dev:sdc1 disk 3, o:1, dev:sdd1 md: considering hdd1 ... md: adding hdd1 ... md: adding hdc2 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 193 r8169: NAPI enabled eth0: Identified chip type is 'RTL8169s/8110s'. eth0: RTL8169 at 0xf88d6000, 00:11:09:d6:fe:9d, IRQ 193 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.32. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:05.0 to 64 0000:00:05.0: Invalid Mac address detected: ff:ff:ff:ff:fe:ff Please complain to your hardware vendor. Switching to a random MAC. eth1: forcedeth.c: subsystem: 01462:0250 bound to 0000:00:05.0 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 209 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 49684 usecs intel8x0: clocking to 46761 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 23 (level, high) -> IRQ 177 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: irq 177, io mem 0xfe02d000 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 185, io mem 0xfe02f000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 201, io mem 0xfe02e000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1250 $ Ben Collins ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 217 PCI: Via IRQ fixup for 0000:02:0c.0, from 3 to 9 usb 2-2: new low speed USB device using ohci_hcd and address 2 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[217] MMIO=[fdbff000-fdbff7ff] Max Packet=[2048] hiddev96: USB HID v1.10 Device [APC Back-UPS ES 500 FW:801.e5.D USB FW:e5] on usb-0000:00:02.0-2 ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000044b80808003] EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 786424k swap on /dev/VolGroup02/LogVol01. Priority:-1 extents:1 r8169: eth0: link up eth1: no link during initialization. Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 Disabled Privacy Extensions on device c0407080(lo) IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present eth0: no IPv6 routers present