From: "Nicklas Bondesson" <nikomail@hotmail.com>
To: "'Walt H'" <waltabbyh@comcast.net>
Cc: <linux-kernel@vger.kernel.org>
Subject: RE: Error mounting root fs on 72:01 using Promise FastTrak TX2000 (PDC20271)
Date: Mon, 22 Dec 2003 16:31:47 +0100 [thread overview]
Message-ID: <BAY8-DAV664uGmn5YHP000102fe@hotmail.com> (raw)
In-Reply-To: <3FE70842.1020502@comcast.net>
No problem I can see the whole boot log. The ATARAID driver never loads.
Could you force it to load somehow?
I get these messages:
PDC20271: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 12 for device 00.09.0
PCI: Sharing IRQ 12 with 00:04.2
PDC20271: not 100% native mode: will probe irqs later
ide2: BM-DMA at ...
ide3: BM-DMA at ...
then it finds the disks:
hde: WDC ...
hdg: WDC ...
partition check:
hde: hde1, hde2
hdg: hdg1, hdg2
ide: late registration of driver
-----Original Message-----
From: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Walt H
Sent: den 22 december 2003 16:06
To: Nicklas Bondesson
Cc: linux-kernel@vger.kernel.org; andre@linux-ide.org
Subject: Re: Error mounting root fs on 72:01 using Promise FastTrak TX2000
(PDC20271)
Nicklas Bondesson wrote:
> Do I have to include anything else than this??
>
> <*> ATA/IDE/MFM/RLL support
> IDE, ATA and ATAPI Block devices -->
> <*> PROMISE PDC202{68|69|70|71|75|76|77} support (NEW)
> [*] Special FastTrack Feature
>
> <*> Support for IDE Raid Controllers (EXPERIMENTAL)
> <*> Support Promise software RAID (Fasttrak(tm)) (EXPERIMENTAL)
>
> /Nicke
>
I believe that should do it. dmesg doesn't have any info about the ataraid
driver being loaded? If it's scrolling out of the kernel buffer, you can try
bumping up the size through the kernel config. The option is under the
"Kernel Hacking" section and is CONFIG_LOG_BUF_SHIFT. Change it to 17 or 18
to be sure.
A reboot with this new kernel should give you a full dmesg afterward,
hopefully showing what's wrong with the ataraid stuff.
-Walt
PS. I don't remember when this took place, but there were some changes to
the promise drivers in 2.4 around 2.4.21 I think. There should be drivers
for both the older Promise and the newer. I remember always choosing both,
complete with pdcraid just to be sure.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2003-12-22 15:32 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-20 19:44 Walt H
2003-12-20 23:54 ` Nicklas Bondesson
2003-12-21 1:01 ` Walt H
2003-12-21 14:54 ` Nicklas Bondesson
2003-12-21 16:32 ` Walt H
2003-12-21 17:21 ` Nicklas Bondesson
2003-12-22 0:05 ` Nicklas Bondesson
2003-12-22 1:35 ` Walt H
2003-12-22 13:38 ` Nicklas Bondesson
2003-12-22 15:05 ` Walt H
2003-12-22 15:31 ` Nicklas Bondesson [this message]
2003-12-22 23:22 ` Nicklas Bondesson
2003-12-23 0:59 ` Nicklas Bondesson
2003-12-23 2:07 ` Walt H
2003-12-23 3:18 ` Nicklas Bondesson
2003-12-23 3:47 ` Walt H
2003-12-23 13:41 ` Nicklas Bondesson
2003-12-23 13:56 ` Nicklas Bondesson
2003-12-23 15:05 ` Walt H
2003-12-23 16:10 ` Nicklas Bondesson
2003-12-24 0:54 ` Walt H
2003-12-23 14:42 ` Nicklas Bondesson
-- strict thread matches above, loose matches on Subject: below --
2003-12-28 16:26 Nicklas Bondesson
2003-12-28 16:56 ` Marcelo Tosatti
2003-12-28 17:06 ` Nicklas Bondesson
2003-12-20 13:33 Nicklas Bondesson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BAY8-DAV664uGmn5YHP000102fe@hotmail.com \
--to=nikomail@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=waltabbyh@comcast.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®