From: "jim beam" <jim_jim33@hotmail.com>
To: linux-kernel@vger.kernel.org
Subject: USB mass storage device problem
Date: Wed, 12 Nov 2003 02:03:03 +0000 [thread overview]
Message-ID: <BAY8-F125ED2QfgNy3T000559e2@hotmail.com> (raw)
Hello,
I am attempting to get a CompactFlash reader to work (Soyo SB-K7VXBP). The
device sits in a 3.5" bay and plugs directly into a USB1 connector on my
motherboard. It also provides two USB ports, which work.
The CompactFlash reader almost works. At bootup, I get this message:
hub 3-0:1.0: new USB device on port 1, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: SOYO Model: USB Storage-SMC Rev: 0214
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
The device shows up in /sys/block/sda and in
/sys/bus/usb/drivers/usb-storage. Also, /dev/sda is created as a symlink to
/dev/scsi/host0/bus0/target0/lun0/disc (I am using devfs).
However, when try to mount /dev/sda, I get an error saying "No medium
found". I have tried inserting the card after booting and also before
booting, with the same result. I am using the 2.6.0-test9 kernel, but I
have had this device since early 2.4 and it has never worked. It is not
damaged hardware because Windows detects it as a drive.
Trying to run fdisk on /dev/sda gives the message "Unable to open /dev/sda".
Is there something else I need to do, or any more information I can
provide to debug this problem?
Thanks,
Jim
_________________________________________________________________
Is your computer infected with a virus? Find out with a FREE computer virus
scan from McAfee. Take the FreeScan now!
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
next reply other threads:[~2003-11-12 2:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-12 2:03 jim beam [this message]
2003-11-12 2:15 ` Matthew Dharm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BAY8-F125ED2QfgNy3T000559e2@hotmail.com \
--to=jim_jim33@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®