From: startww3@inbox.com
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: irqflags
Date: Tue, 15 Dec 2009 18:06:37 -0800 [thread overview]
Message-ID: <BC87A9C3FC0.0000013Dstartww3@inbox.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 6982 bytes --]
1) Summary:
'include/linux/irqflags.h' contains incorrect code
(at least for x86_64) in sections where
TRACE_IRQFLAGS_SUPPORT is not defined.
i.e.) when 'arch/x86/Kconfig.debug' contains:
config TRACE_IRQFLAGS_SUPPORT
def_bool n
2) Full Description:
patch 'include/linux/irqflags.h' as per attached file
(also duplicated below in text).
3) Keywords:
irqflags, irqflags.h, Kconfig.debug
7.1) scripts/ver_linux:
Linux localhost 2.6.31.6 #2 Mon Dec 14 15:25:35 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Gnu C 4.4.2
Gnu make 3.81
binutils 2.19.51.0.14
util-linux 2.16
mount support
module-init-tools 3.9
e2fsprogs 1.41.9
xfsprogs 3.0.3
quota-tools 3.17.
PPP 2.4.4
Linux C Library 2.11
Dynamic linker (ldd) 2.11
Procps 3.2.8
Net-tools 1.60
Kbd 1.15
oprofile 0.9.5
Sh-utils 7.6
Modules Loaded vboxnetadp vboxnetflt vboxdrv dm_multipath nvidia snd_via82xx snd_ac97_codec ac97_bus snd_mpu401_uart snd_rawmidi via_rhine sg sr_mod cdrom usb_storage mii ata_generic sd_mod
7.2) Cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 44
model name : AMD Sempron(tm) Processor 3100+
stepping : 2
cpu MHz : 1808.299
cache size : 256 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good pni lahf_lm
bogomips : 3616.59
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
X) Patched 'include/linux/irqflags.h'
(tested and works under AMD K8 fc12 2.6.31):
/*
* include/linux/irqflags.h
*
* IRQ flags tracing: follow the state of the hardirq and softirq flags and
* provide callbacks for transitions between ON and OFF states.
*
* This file gets included from lowlevel asm headers too, to provide
* wrapped versions of the local_irq_*() APIs, based on the
* raw_local_irq_*() macros from the lowlevel headers.
*/
#ifndef _LINUX_TRACE_IRQFLAGS_H
#define _LINUX_TRACE_IRQFLAGS_H
#include <linux/typecheck.h>
#ifdef CONFIG_TRACE_IRQFLAGS
extern void trace_softirqs_on(unsigned long ip);
extern void trace_softirqs_off(unsigned long ip);
extern void trace_hardirqs_on(void);
extern void trace_hardirqs_off(void);
# define trace_hardirq_context(p) ((p)->hardirq_context)
# define trace_softirq_context(p) ((p)->softirq_context)
# define trace_hardirqs_enabled(p) ((p)->hardirqs_enabled)
# define trace_softirqs_enabled(p) ((p)->softirqs_enabled)
# define trace_hardirq_enter() do { current->hardirq_context++; } while (0)
# define trace_hardirq_exit() do { current->hardirq_context--; } while (0)
# define lockdep_softirq_enter() do { current->softirq_context++; } while (0)
# define lockdep_softirq_exit() do { current->softirq_context--; } while (0)
# define INIT_TRACE_IRQFLAGS .softirqs_enabled = 1,
#else
# define trace_hardirqs_on() do { } while (0)
# define trace_hardirqs_off() do { } while (0)
# define trace_softirqs_on(ip) do { } while (0)
# define trace_softirqs_off(ip) do { } while (0)
# define trace_hardirq_context(p) 0
# define trace_softirq_context(p) 0
# define trace_hardirqs_enabled(p) 0
# define trace_softirqs_enabled(p) 0
# define trace_hardirq_enter() do { } while (0)
# define trace_hardirq_exit() do { } while (0)
# define lockdep_softirq_enter() do { } while (0)
# define lockdep_softirq_exit() do { } while (0)
# define INIT_TRACE_IRQFLAGS
#endif
#if defined(CONFIG_IRQSOFF_TRACER) || \
defined(CONFIG_PREEMPT_TRACER)
extern void stop_critical_timings(void);
extern void start_critical_timings(void);
#else
# define stop_critical_timings() do { } while (0)
# define start_critical_timings() do { } while (0)
#endif
#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
#include <asm/irqflags.h>
#define local_irq_enable() \
do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
#define local_irq_disable() \
do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
#define local_irq_save(flags) \
do { \
typecheck(unsigned long, flags); \
raw_local_irq_save(flags); \
trace_hardirqs_off(); \
} while (0)
#define local_irq_restore(flags) \
do { \
typecheck(unsigned long, flags); \
if (raw_irqs_disabled_flags(flags)) { \
raw_local_irq_restore(flags); \
trace_hardirqs_off(); \
} else { \
trace_hardirqs_on(); \
raw_local_irq_restore(flags); \
} \
} while (0)
#else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */
/*
* The local_irq_*() APIs are equal to the raw_local_irq*()
* if !TRACE_IRQFLAGS.
*/
#include <asm/irqflags.h>
# define local_irq_disable() raw_local_irq_disable()
# define local_irq_enable() raw_local_irq_enable()
# define local_irq_save(flags) raw_local_irq_save(flags)
# define local_irq_restore(flags) raw_local_irq_restore(flags)
#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
#define safe_halt() \
do { \
trace_hardirqs_on(); \
raw_safe_halt(); \
} while (0)
#define local_save_flags(flags) \
do { \
typecheck(unsigned long, flags); \
raw_local_save_flags(flags); \
} while (0)
#define irqs_disabled() \
({ \
unsigned long _flags; \
\
raw_local_save_flags(_flags); \
raw_irqs_disabled_flags(_flags); \
})
#define irqs_disabled_flags(flags) \
({ \
typecheck(unsigned long, flags); \
raw_irqs_disabled_flags(flags); \
})
#else
#define safe_halt() raw_safe_halt()
#define local_save_flags(flags) raw_local_save_flags(flags)
#define irqs_disabled() \
({ \
unsigned long _flags; \
\
raw_local_save_flags(_flags); \
raw_irqs_disabled_flags(_flags); \
})
#define irqs_disabled_flags(flags) \
({ \
typecheck(unsigned long, flags); \
raw_irqs_disabled_flags(flags); \
})
#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
#endif /*_LINUX_TRACE_IRQFLAGS_H */
____________________________________________________________
GET FREE 5GB EMAIL - Check out spam free email with many cool features!
Visit http://www.inbox.com/email to find out more!
[-- Attachment #2: include--linux--irqflags.h --]
[-- Type: text/plain, Size: 4698 bytes --]
/*
* include/linux/irqflags.h
*
* IRQ flags tracing: follow the state of the hardirq and softirq flags and
* provide callbacks for transitions between ON and OFF states.
*
* This file gets included from lowlevel asm headers too, to provide
* wrapped versions of the local_irq_*() APIs, based on the
* raw_local_irq_*() macros from the lowlevel headers.
*/
#ifndef _LINUX_TRACE_IRQFLAGS_H
#define _LINUX_TRACE_IRQFLAGS_H
#include <linux/typecheck.h>
#ifdef CONFIG_TRACE_IRQFLAGS
extern void trace_softirqs_on(unsigned long ip);
extern void trace_softirqs_off(unsigned long ip);
extern void trace_hardirqs_on(void);
extern void trace_hardirqs_off(void);
# define trace_hardirq_context(p) ((p)->hardirq_context)
# define trace_softirq_context(p) ((p)->softirq_context)
# define trace_hardirqs_enabled(p) ((p)->hardirqs_enabled)
# define trace_softirqs_enabled(p) ((p)->softirqs_enabled)
# define trace_hardirq_enter() do { current->hardirq_context++; } while (0)
# define trace_hardirq_exit() do { current->hardirq_context--; } while (0)
# define lockdep_softirq_enter() do { current->softirq_context++; } while (0)
# define lockdep_softirq_exit() do { current->softirq_context--; } while (0)
# define INIT_TRACE_IRQFLAGS .softirqs_enabled = 1,
#else
# define trace_hardirqs_on() do { } while (0)
# define trace_hardirqs_off() do { } while (0)
# define trace_softirqs_on(ip) do { } while (0)
# define trace_softirqs_off(ip) do { } while (0)
# define trace_hardirq_context(p) 0
# define trace_softirq_context(p) 0
# define trace_hardirqs_enabled(p) 0
# define trace_softirqs_enabled(p) 0
# define trace_hardirq_enter() do { } while (0)
# define trace_hardirq_exit() do { } while (0)
# define lockdep_softirq_enter() do { } while (0)
# define lockdep_softirq_exit() do { } while (0)
# define INIT_TRACE_IRQFLAGS
#endif
#if defined(CONFIG_IRQSOFF_TRACER) || \
defined(CONFIG_PREEMPT_TRACER)
extern void stop_critical_timings(void);
extern void start_critical_timings(void);
#else
# define stop_critical_timings() do { } while (0)
# define start_critical_timings() do { } while (0)
#endif
#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
#include <asm/irqflags.h>
#define local_irq_enable() \
do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
#define local_irq_disable() \
do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
#define local_irq_save(flags) \
do { \
typecheck(unsigned long, flags); \
raw_local_irq_save(flags); \
trace_hardirqs_off(); \
} while (0)
#define local_irq_restore(flags) \
do { \
typecheck(unsigned long, flags); \
if (raw_irqs_disabled_flags(flags)) { \
raw_local_irq_restore(flags); \
trace_hardirqs_off(); \
} else { \
trace_hardirqs_on(); \
raw_local_irq_restore(flags); \
} \
} while (0)
#else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */
/*
* The local_irq_*() APIs are equal to the raw_local_irq*()
* if !TRACE_IRQFLAGS.
*/
#include <asm/irqflags.h>
# define local_irq_disable() raw_local_irq_disable()
# define local_irq_enable() raw_local_irq_enable()
# define local_irq_save(flags) raw_local_irq_save(flags)
# define local_irq_restore(flags) raw_local_irq_restore(flags)
#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
#define safe_halt() \
do { \
trace_hardirqs_on(); \
raw_safe_halt(); \
} while (0)
#define local_save_flags(flags) \
do { \
typecheck(unsigned long, flags); \
raw_local_save_flags(flags); \
} while (0)
#define irqs_disabled() \
({ \
unsigned long _flags; \
\
raw_local_save_flags(_flags); \
raw_irqs_disabled_flags(_flags); \
})
#define irqs_disabled_flags(flags) \
({ \
typecheck(unsigned long, flags); \
raw_irqs_disabled_flags(flags); \
})
#else
#define safe_halt() raw_safe_halt()
#define local_save_flags(flags) raw_local_save_flags(flags)
#define irqs_disabled() \
({ \
unsigned long _flags; \
\
raw_local_save_flags(_flags); \
raw_irqs_disabled_flags(_flags); \
})
#define irqs_disabled_flags(flags) \
({ \
typecheck(unsigned long, flags); \
raw_irqs_disabled_flags(flags); \
})
#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
#endif /*_LINUX_TRACE_IRQFLAGS_H */
next reply other threads:[~2009-12-16 2:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-16 2:06 startww3 [this message]
2009-12-16 2:32 ` andrew hendry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BC87A9C3FC0.0000013Dstartww3@inbox.com \
--to=startww3@inbox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®