From: Elvis Dowson <elvis.dowson@mac.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux OMAP Mailing List <linux-omap@vger.kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Subject: kgdb errors with serial console
Date: Fri, 08 Oct 2010 01:47:09 +0400 [thread overview]
Message-ID: <BDD07355-7199-4A2E-8426-F6D43EA5D313@mac.com> (raw)
Hi,
I'm getting the following errors when attempting to use kgdb with the serial console. Any idea how I can resolve this issue?
The correct serial parameters when I use kermit with the target board is
set flow-control off
set carrier-watch none
set speed 115200
and it connects correctly.
I'm not sure if the gdb configuration commands for the serial port are sufficient, and if there is a parameter that I am missing here. The host is connected to the target using an FTDI USB to serial converter, so it appears as /dev/ttyUSB0 on the host and as ttyS2 on the target.
# su
# cd /tool/patches/android-rowboat-froyo-2.2-patchwork/kernel
# arm-angstrom-linux-gnueabi-gdb
(gdb) file vmlinux
Reading symbols from /tool/patches/android-rowboat-froyo-2.2-patchwork/kernel/vmlinux...done.
(gdb) set remotebaud 115200
(gdb) set remoteflow 0
(gdb) set debug remote 1
(gdb) set debug serial 1
(gdb) target remote /dev/ttyUSB0
Remote debugging using /dev/ttyUSB0
Sending packet: $qSupported#37...[
r +]Ack
[$][q][S][u][p][p][o][r][t][e][d][#][3][7]Packet received: qSupported
Packet qSupported (supported-packets) is supported
warning: unrecognized item "qSupported" in "qSupported" response
Sending packet: $Hg0#df...[+]Ack
[$][H][g][0][#][d][f]Packet received: Hg0
Sending packet: $?#3f...[+]Ack
[$][?][#][3][f]Packet received: ?
Sending packet: $Hc-1#09...[+]Ack
[$][H][c][-][1][#][0][9]Packet received: Hc-1
Sending packet: $qC#b4...[+]Ack
[$][q][C][#][b][4]Packet received: qC
Sending packet: $qAttached#8f...[+]Ack
[$][q][A][t][t][a][c][h][e][d][#][8][f]Packet received: qAttached
Packet qAttached (query-attached) is supported
Sending packet: $qOffsets#4b...[+]Ack
[$][q][O][f][f][s][\r][\r][\n][e][t][s][#][4][b]Bad checksum, sentsum=0x4b, csum=0x6f, buf=qOffs\r\r\nets
[-][<Timeout: 2 seconds>]Timed out.
[-][<Timeout: 2 seconds>]Timed out.
Ignoring packet error, continuing...
Malformed response to offset query, qOffs
ets
(gdb)
Best regards,
Elvis Dowson
next reply other threads:[~2010-10-07 21:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-07 21:47 Elvis Dowson [this message]
2010-10-07 22:37 ` Jason Wessel
2010-10-07 22:55 ` Elvis Dowson
2010-10-07 23:07 ` Elvis Dowson
2010-10-07 23:44 ` Jason Wessel
2010-10-08 10:41 ` Elvis Dowson
2010-10-08 13:17 ` Jason Wessel
2010-10-08 21:36 ` Elvis Dowson
2010-10-08 22:07 ` Elvis Dowson
2010-10-08 22:33 ` Elvis Dowson
2010-10-09 0:05 ` Elvis Dowson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BDD07355-7199-4A2E-8426-F6D43EA5D313@mac.com \
--to=elvis.dowson@mac.com \
--cc=jason.wessel@windriver.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®