mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wanpeng Li <wanpeng.li@hotmail.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Matlack <dmatlack@google.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Wanpeng Li <wanpeng.li@hotmail.com>
Subject: [PATCH v7 2/3] KVM: dynamic halt-polling
Date: Thu, 3 Sep 2015 22:07:38 +0800	[thread overview]
Message-ID: <BLU436-SMTP2016CD0BF5AFCCDAD29C2C780570@phx.gbl> (raw)
In-Reply-To: <1441289259-32072-1-git-send-email-wanpeng.li@hotmail.com>

There is a downside of always-poll since poll is still happened for idle 
vCPUs which can waste cpu usage. This patchset add the ability to adjust 
halt_poll_ns dynamically, to grow halt_poll_ns when shot halt is detected,  
and to shrink halt_poll_ns when long halt is detected.

There are two new kernel parameters for changing the halt_poll_ns:
halt_poll_ns_grow and halt_poll_ns_shrink. 

                        no-poll      always-poll    dynamic-poll
-----------------------------------------------------------------------
Idle (nohz) vCPU %c0     0.15%        0.3%            0.2%  
Idle (250HZ) vCPU %c0    1.1%         4.6%~14%        1.2%
TCP_RR latency           34us         27us            26.7us

"Idle (X) vCPU %c0" is the percent of time the physical cpu spent in
c0 over 60 seconds (each vCPU is pinned to a pCPU). (nohz) means the
guest was tickless. (250HZ) means the guest was ticking at 250HZ.

The big win is with ticking operating systems. Running the linux guest
with nohz=off (and HZ=250), we save 3.4%~12.8% CPUs/second and get close 
to no-polling overhead levels by using the dynamic-poll. The savings
should be even higher for higher frequency ticks.

Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
---
 virt/kvm/kvm_main.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 59 insertions(+), 4 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index c06e57c..d5e07e9 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -66,9 +66,18 @@
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
-static unsigned int halt_poll_ns;
+/* halt polling only reduces halt latency by 5-7 us, 500us is enough */
+static unsigned int halt_poll_ns = 500000;
 module_param(halt_poll_ns, uint, S_IRUGO | S_IWUSR);
 
+/* Default doubles per-vcpu halt_poll_ns. */
+static unsigned int halt_poll_ns_grow = 2;
+module_param(halt_poll_ns_grow, int, S_IRUGO);
+
+/* Default resets per-vcpu halt_poll_ns . */
+static unsigned int halt_poll_ns_shrink;
+module_param(halt_poll_ns_shrink, int, S_IRUGO);
+
 /*
  * Ordering of locks:
  *
@@ -1907,6 +1916,31 @@ void kvm_vcpu_mark_page_dirty(struct kvm_vcpu *vcpu, gfn_t gfn)
 }
 EXPORT_SYMBOL_GPL(kvm_vcpu_mark_page_dirty);
 
+static void grow_halt_poll_ns(struct kvm_vcpu *vcpu)
+{
+	int val = vcpu->halt_poll_ns;
+
+	/* 10us base */
+	if (val == 0 && halt_poll_ns_grow)
+		val = 10000;
+	else
+		val *= halt_poll_ns_grow;
+
+	vcpu->halt_poll_ns = val;
+}
+
+static void shrink_halt_poll_ns(struct kvm_vcpu *vcpu)
+{
+	int val = vcpu->halt_poll_ns;
+
+	if (halt_poll_ns_shrink == 0)
+		val = 0;
+	else
+		val /= halt_poll_ns_shrink;
+
+	vcpu->halt_poll_ns = val;
+}
+
 static int kvm_vcpu_check_block(struct kvm_vcpu *vcpu)
 {
 	if (kvm_arch_vcpu_runnable(vcpu)) {
@@ -1928,7 +1962,8 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 {
 	ktime_t start, cur;
 	DEFINE_WAIT(wait);
-	bool waited = false;
+	bool polled = false, waited = false;
+	u64 poll_ns = 0, wait_ns = 0, block_ns = 0;
 
 	start = cur = ktime_get();
 	if (vcpu->halt_poll_ns) {
@@ -1940,11 +1975,16 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 			 * arrives.
 			 */
 			if (kvm_vcpu_check_block(vcpu) < 0) {
+				polled = true;
 				++vcpu->stat.halt_successful_poll;
-				goto out;
+				break;
 			}
 			cur = ktime_get();
 		} while (single_task_running() && ktime_before(cur, stop));
+
+		poll_ns = ktime_to_ns(cur) - ktime_to_ns(start);
+		if (polled)
+			goto out;
 	}
 
 	for (;;) {
@@ -1959,9 +1999,24 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 
 	finish_wait(&vcpu->wq, &wait);
 	cur = ktime_get();
+	wait_ns = ktime_to_ns(cur) - ktime_to_ns(start);
 
 out:
-	trace_kvm_vcpu_wakeup(ktime_to_ns(cur) - ktime_to_ns(start), waited);
+	block_ns = poll_ns + wait_ns;
+
+	if (halt_poll_ns) {
+		if (block_ns <= vcpu->halt_poll_ns)
+			;
+		/* we had a long block, shrink polling */
+		else if (vcpu->halt_poll_ns && block_ns > halt_poll_ns)
+			shrink_halt_poll_ns(vcpu);
+		/* we had a short halt and our poll time is too small */
+		else if (vcpu->halt_poll_ns < halt_poll_ns &&
+			block_ns < halt_poll_ns)
+			grow_halt_poll_ns(vcpu);
+	}
+
+	trace_kvm_vcpu_wakeup(block_ns, waited);
 }
 EXPORT_SYMBOL_GPL(kvm_vcpu_block);
 
-- 
1.9.1


  parent reply	other threads:[~2015-09-04  0:11 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1441289259-32072-1-git-send-email-wanpeng.li@hotmail.com>
2015-09-03 14:07 ` [PATCH v7 1/3] KVM: make halt_poll_ns per-vCPU Wanpeng Li
2015-09-06 14:33   ` Paolo Bonzini
2015-09-03 14:07 ` Wanpeng Li [this message]
2015-09-04 22:38   ` [PATCH v7 2/3] KVM: dynamic halt-polling Wanpeng Li
2015-09-06 14:32     ` Paolo Bonzini
2015-09-06 22:23       ` Wanpeng Li
2015-09-03 14:07 ` [PATCH v7 3/3] KVM: trace kvm_halt_poll_ns grow/shrink Wanpeng Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BLU436-SMTP2016CD0BF5AFCCDAD29C2C780570@phx.gbl \
    --to=wanpeng.li@hotmail.com \
    --cc=dmatlack@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome