RE: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Xilinx Versal platform

["Potthuri, Sai Krishna" <sai.krishna.potthuri@amd.com>]

Hi Krzysztof,

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Monday, August 5, 2024 3:38 PM
> To: Potthuri, Sai Krishna <sai.krishna.potthuri@amd.com>; Linus Walleij
> <linus.walleij@linaro.org>; Simek, Michal <michal.simek@amd.com>; Rob
> Herring <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley <conor+dt@kernel.org>;
> Buddhabhatti, Jay <jay.buddhabhatti@amd.com>; Kundanala, Praveen Teja
> <praveen.teja.kundanala@amd.com>; Greg Kroah-Hartman
> <gregkh@linuxfoundation.org>
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-gpio@vger.kernel.org; devicetree@vger.kernel.org;
> saikrishna12468@gmail.com; git (AMD-Xilinx) <git@amd.com>
> Subject: Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Xilinx Versal
> platform
> 
> On 01/08/2024 14:00, Sai Krishna Potthuri wrote:
> > Add Xilinx Versal compatible string and corresponding groups, function
> > and pins properties to support pin controller features on Versal platform.
> >
> > Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
> > ---
> >  .../bindings/pinctrl/xlnx,versal-pinctrl.yaml | 398
> > ++++++++++++++++++
> >  1 file changed, 398 insertions(+)

> > +      bias-pull-up: true
> > +
> > +      bias-pull-down: true
> > +
> > +      bias-disable: true
> > +
> > +      input-schmitt-enable: true
> > +
> > +      input-schmitt-disable: true
> > +
> > +      bias-high-impedance: true
> > +
> > +      low-power-enable: true
> > +
> > +      low-power-disable: true
> 
> Why do you need to copy all of these? Just switch to unevaluatedProperties.
I tried with "unevaluatedProperties: false", it worked but by adding this all the
properties in the pincfg-node.yaml become valid for this platform which is not
true. Not all the properties in the pincfg-node.yaml are supported in this platform.
So, is there any other way of representing this?

Regards
Sai Krishna