mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pawel Laszczak <pawell@cadence.com>
To: Roger Quadros <rogerq@ti.com>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Alan Douglas <adouglas@cadence.com>,
	"jbergsagel@ti.com" <jbergsagel@ti.com>,
	"peter.chen@nxp.com" <peter.chen@nxp.com>,
	Pawel Jez <pjez@cadence.com>, Rahul Kumar <kurahul@cadence.com>
Subject: RE: [RFC PATCH v1 13/14] usb:cdns3: Adds debugging function.
Date: Thu, 8 Nov 2018 12:03:04 +0000	[thread overview]
Message-ID: <BYAPR07MB47095AEDBB8F4877CC977A88DDC50@BYAPR07MB4709.namprd07.prod.outlook.com> (raw)
In-Reply-To: <5BE40331.90107@ti.com>

>Hi,
>
>On 03/11/18 19:51, Pawel Laszczak wrote:
>> Patch implements some function used for debugging driver.
>>
>> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
>> ---
>>  drivers/usb/cdns3/Makefile |   2 +-
>>  drivers/usb/cdns3/debug.c  | 128 +++++++++++++++++++++++++++++++++++++
>>  drivers/usb/cdns3/ep0.c    |   3 +
>>  drivers/usb/cdns3/gadget.c |  12 ++++
>>  drivers/usb/cdns3/gadget.h |  13 +++-
>>  5 files changed, 156 insertions(+), 2 deletions(-)
>>  create mode 100644 drivers/usb/cdns3/debug.c
>>
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index f4cfc978626f..34e60d03c4ec 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -2,6 +2,6 @@ obj-$(CONFIG_USB_CDNS3)			+= cdns3.o
>>  obj-$(CONFIG_USB_CDNS3_PCI_WRAP)	+= cdns3-pci.o
>>
>>  cdns3-y					:= core.o drd.o
>> -cdns3-$(CONFIG_USB_CDNS3_GADGET)	+= gadget.o ep0.o
>> +cdns3-$(CONFIG_USB_CDNS3_GADGET)	+= gadget.o ep0.o debug.o
>>  cdns3-$(CONFIG_USB_CDNS3_HOST)		+= host.o
>>  cdns3-pci-y		 		:= cdns3-pci-wrap.o
>> diff --git a/drivers/usb/cdns3/debug.c b/drivers/usb/cdns3/debug.c
>> new file mode 100644
>> index 000000000000..bebf22c4d18e
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/debug.c
>> @@ -0,0 +1,128 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Cadence USBSS DRD Driver.
>> + *
>> + * Copyright (C) 2018 Cadence.
>> + *
>> + * Author: Pawel Laszczak <pawell@cadence.com>
>> + */
>> +
>> +#include "gadget.h"
>> +
>> +static inline char *cdns3_decode_ep_irq(u32 ep_sts, const char *ep_name)
>> +{
>> +	static char str[256];
>> +	int ret;
>> +
>> +	ret = sprintf(str, "IRQ for %s: %08x ", ep_name, ep_sts);
>> +
>> +	if (ep_sts & EP_STS_SETUP)
>> +		ret += sprintf(str + ret, "SETUP ");
>> +	if (ep_sts & EP_STS_IOC)
>> +		ret += sprintf(str + ret, "IOC ");
>> +	if (ep_sts & EP_STS_ISP)
>> +		ret += sprintf(str + ret, "ISP ");
>> +	if (ep_sts & EP_STS_DESCMIS)
>> +		ret += sprintf(str + ret, "DESCMIS ");
>> +	if (ep_sts & EP_STS_STREAMR)
>> +		ret += sprintf(str + ret, "STREAMR ");
>> +	if (ep_sts & EP_STS_MD_EXIT)
>> +		ret += sprintf(str + ret, "MD_EXIT ");
>> +	if (ep_sts & EP_STS_TRBERR)
>> +		ret += sprintf(str + ret, "TRBERR ");
>> +	if (ep_sts & EP_STS_NRDY)
>> +		ret += sprintf(str + ret, "NRDY ");
>> +	if (ep_sts & EP_STS_PRIME)
>> +		ret += sprintf(str + ret, "PRIME ");
>> +	if (ep_sts & EP_STS_SIDERR)
>> +		ret += sprintf(str + ret, "SIDERRT ");
>> +	if (ep_sts & EP_STS_OUTSMM)
>> +		ret += sprintf(str + ret, "OUTSMM ");
>> +	if (ep_sts & EP_STS_ISOERR)
>> +		ret += sprintf(str + ret, "ISOERR ");
>> +	if (ep_sts & EP_STS_IOT)
>> +		ret += sprintf(str + ret, "IOT ");
>> +
>> +	return str;
>> +}
>> +
>> +char *cdns3_decode_epx_irq(struct cdns3_endpoint *priv_ep)
>> +{
>> +	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
>> +
>> +	return cdns3_decode_ep_irq(readl(&priv_dev->regs->ep_sts),
>> +				   priv_ep->name);
>> +}
>> +
>> +char *cdns3_decode_ep0_irq(struct cdns3_device *priv_dev, int dir)
>> +{
>> +	if (dir)
>> +		return cdns3_decode_ep_irq(readl(&priv_dev->regs->ep_sts),
>> +					   "ep0IN");
>> +	else
>> +		return cdns3_decode_ep_irq(readl(&priv_dev->regs->ep_sts),
>> +					   "ep0OUT");
>> +}
>> +
>> +void cdns3_dbg_setup(struct cdns3_device *priv_dev)
>> +{
>> +	struct usb_ctrlrequest *setup = priv_dev->setup;
>> +
>> +	dev_dbg(&priv_dev->dev,
>> +		"SETUP BRT: %02x BR: %02x V: %04x I: %04x L: %04x\n",
>> +		setup->bRequestType,
>> +		setup->bRequest,
>> +		le16_to_cpu(setup->wValue),
>> +		le16_to_cpu(setup->wIndex),
>> +		le16_to_cpu(setup->wLength));
>> +}
>> +
>> +/**
>> + * Debug a transfer ring.
>> + *
>> + * Prints out all TRBs in the endpoint ring, even those after the Link TRB.
>> + *.
>> + */
>> +void cdns3_dbg_ring(struct cdns3_device *priv_dev,
>> +		    struct cdns3_endpoint *priv_ep)
>> +{
>> +	u64 addr = priv_ep->trb_pool_dma;
>> +	struct cdns3_trb *trb;
>> +	int i;
>> +
>> +	for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
>> +		trb = &priv_ep->trb_pool[i];
>> +		dev_dbg(&priv_dev->dev, "@%016llx %08x %08x %08x\n", addr,
>> +			le32_to_cpu(trb->buffer),
>> +			le32_to_cpu(trb->length),
>> +			le32_to_cpu(trb->control));
>> +		addr += sizeof(*trb);
>> +	}
>> +}
>> +
>> +void cdns3_dbg_ring_ptrs(struct cdns3_device *priv_dev,
>> +			 struct cdns3_endpoint *priv_ep)
>> +{
>> +	struct cdns3_trb *trb;
>> +
>> +	trb = &priv_ep->trb_pool[priv_ep->dequeue];
>> +	dev_dbg(&priv_dev->dev,
>> +		"Ring deq index: %d, trb: %p (virt), 0x%llx (dma)\n",
>> +		priv_ep->dequeue, trb,
>> +		cdns3_trb_virt_to_dma(priv_ep, trb));
>> +
>> +	trb = &priv_ep->trb_pool[priv_ep->enqueue];
>> +	dev_dbg(&priv_dev->dev,
>> +		"Ring enq index: %d, trb: %p (virt), 0x%llx (dma)\n",
>> +		priv_ep->enqueue, trb,
>> +		cdns3_trb_virt_to_dma(priv_ep, trb));
>> +}
>> +
>> +void cdns3_dbg_ep_rings(struct cdns3_device *priv_dev,
>> +			struct cdns3_endpoint *priv_ep)
>> +{
>> +	dev_dbg(&priv_dev->dev, "Endpoint ring %s:\n", priv_ep->name);
>> +
>> +	cdns3_dbg_ring_ptrs(priv_dev, priv_ep);
>> +	cdns3_dbg_ring(priv_dev, priv_ep);
>> +}
>> diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
>> index 555ac7f6842e..46c943a74f77 100644
>> --- a/drivers/usb/cdns3/ep0.c
>> +++ b/drivers/usb/cdns3/ep0.c
>> @@ -604,12 +604,15 @@ void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
>>  	cdns3_select_ep(priv_dev, 0 | (dir ? USB_DIR_IN : USB_DIR_OUT));
>>  	ep_sts_reg = readl(&regs->ep_sts);
>>
>> +	dev_dbg(&priv_dev->dev, "%s\n", cdns3_decode_ep0_irq(priv_dev, dir));
>> +
>>  	__pending_setup_status_handler(priv_dev);
>>
>>  	if ((ep_sts_reg & EP_STS_SETUP) && dir == 0) {
>>  		struct usb_ctrlrequest *setup = priv_dev->setup;
>>
>>  		writel(EP_STS_SETUP | EP_STS_IOC | EP_STS_ISP, &regs->ep_sts);
>> +		cdns3_dbg_setup(priv_dev);
>>
>>  		priv_dev->ep0_data_dir = setup->bRequestType & USB_DIR_IN;
>>  		cdns3_ep0_setup_phase(priv_dev);
>> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
>> index 905cad1a8229..ba4a36ce6e9a 100644
>> --- a/drivers/usb/cdns3/gadget.c
>> +++ b/drivers/usb/cdns3/gadget.c
>> @@ -124,6 +124,14 @@ void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
>>  	wmb();
>>  }
>>
>> +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
>> +				 struct cdns3_trb *trb)
>> +{
>> +	u32 offset = (char *)trb - (char *)priv_ep->trb_pool;
>> +
>> +	return priv_ep->trb_pool_dma + offset;
>> +}
>> +
>>  /**
>>   * cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint
>>   * @priv_ep:  endpoint object
>> @@ -428,6 +436,8 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
>>  		trb->control |= first_pcs;
>>
>>  	priv_req->on_ring = 1;
>> +
>> +	cdns3_dbg_ep_rings(priv_dev, priv_ep);
>>  arm:
>>  	/* arm transfer on selected endpoint */
>>  	cdns3_select_ep(priv_ep->cdns3_dev, address);
>> @@ -537,6 +547,8 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
>>  	cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
>>  	ep_sts_reg = readl(&regs->ep_sts);
>>
>> +	dev_dbg(&priv_dev->dev, "%s\n", cdns3_decode_epx_irq(priv_ep));
>> +
>>  	if (ep_sts_reg & EP_STS_TRBERR)
>>  		writel(EP_STS_TRBERR, &regs->ep_sts);
>>
>> diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h
>> index 3f67ef1e5cda..3b2c01ff655b 100644
>> --- a/drivers/usb/cdns3/gadget.h
>> +++ b/drivers/usb/cdns3/gadget.h
>> @@ -1085,5 +1085,16 @@ struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
>>  void cdns3_gadget_ep_free_request(struct usb_ep *ep,
>>  				  struct usb_request *request);
>>  int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
>> -
>> +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
>> +				 struct cdns3_trb *trb);
>> +
>> +char *cdns3_decode_epx_irq(struct cdns3_endpoint *priv_ep);
>> +char *cdns3_decode_ep0_irq(struct cdns3_device *priv_dev, int dir);
>> +void cdns3_dbg_ring(struct cdns3_device *priv_dev,
>> +		    struct cdns3_endpoint *priv_ep);
>> +void cdns3_dbg_ring_ptrs(struct cdns3_device *priv_dev,
>> +			 struct cdns3_endpoint *priv_ep);
>> +void cdns3_dbg_ep_rings(struct cdns3_device *priv_dev,
>> +			struct cdns3_endpoint *priv_ep);
>> +void cdns3_dbg_setup(struct cdns3_device *priv_dev);
>>  #endif /* __LINUX_CDNS3_GADGET */
>>
>
>How often are these invoked?
>
>For I/O intensive cases dev_dbg() will not be useful as it will affect timing adversely
>because of which it might prevent the issue from happening when debug is enabled.
>
>How about using tracepoints instead?

Yes, I know and I agree with you. 
I have plan to replace this with tracepoints. 
But I need some time for this. Currently I'm focusing on testing.
Probably  I will change It by the end of this month, so it should be in 
RFC PATCH v3. 

>
>cheers,
>-roger
>--
>Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Thanks,
Cheers,
Pawell


  reply	other threads:[~2018-11-08 12:03 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-03 17:51 [RFC PATCH v1 00/14] Introduced new Cadence USBSS DRD Driver Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 01/14] usb:cdns3: add pci to platform driver wrapper Pawel Laszczak
2018-11-06 13:48   ` Roger Quadros
2018-11-07  8:42     ` Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 02/14] usb:cdns3: Device side header file Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 03/14] usb:cdns3: Driver initialization code Pawel Laszczak
2018-11-06 14:18   ` Roger Quadros
2018-11-07 13:14     ` Pawel Laszczak
2018-11-06 14:44   ` Roger Quadros
2018-11-08 11:38     ` Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 04/14] usb:cdns3: Added DRD support Pawel Laszczak
2018-11-06 14:32   ` Roger Quadros
2018-11-08 11:33     ` Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 05/14] usb:cdns3: Added Wrapper to XCHI driver Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 06/14] usb:cdns3: Initialization code for Device side Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 07/14] usb:cdns3: Implements device operations part of the API Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 08/14] usb:cdns3: EpX " Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 09/14] usb:cdns3: Ep0 " Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 10/14] usb:cdns3: Implements ISR functionality Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 11/14] usb:cdns3: Adds enumeration related function Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 12/14] usb:cdns3: Adds transfer " Pawel Laszczak
2018-11-03 17:51 ` [RFC PATCH v1 13/14] usb:cdns3: Adds debugging function Pawel Laszczak
2018-11-03 19:14   ` Joe Perches
2018-11-05  6:17     ` Pawel Laszczak
2018-11-08  9:34   ` Roger Quadros
2018-11-08 12:03     ` Pawel Laszczak [this message]
2018-11-03 17:51 ` [RFC PATCH v1 14/14] usb:cdns3: Feature for changing role Pawel Laszczak
2018-11-06 14:51   ` Roger Quadros
2018-11-08 11:51     ` Pawel Laszczak
2018-11-08 14:22       ` Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BYAPR07MB47095AEDBB8F4877CC977A88DDC50@BYAPR07MB4709.namprd07.prod.outlook.com \
    --to=pawell@cadence.com \
    --cc=adouglas@cadence.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jbergsagel@ti.com \
    --cc=kurahul@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter.chen@nxp.com \
    --cc=pjez@cadence.com \
    --cc=rogerq@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®