Re: [PATCH V3 0/4] Changes for SDCC5 version

[Craig <ctatlor97@gmail.com>]

On 25 September 2018 12:17:26 BST, Veerabhadrarao Badiganti <vbadigan@codeaurora.org> wrote:
>
>On 9/25/2018 1:18 AM, Craig Tatlor wrote:
>> What socs have you tested this on?
>> On sdm660 it seems to crash device
>> when writing pwr ctl.
>
>Hi
>We have tested this on SDM845.
>SDM660 also has SDCC5 controller, so you would need to define
>"qcom,sdhci-msm-v5" in your platform dt.
>Can you confirm if you have defined this?
>
Hi,
Yes my DT entry is as follows

        sdhc_1: sdhci@f9824900 {                                                                  
                compatible = "qcom,sdhci-msm-v5";                                                 
                reg = <0xc0c4000 0x1000>, <0xc0c5000 0x1000>;                                     
                interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;                                   
                interrupt-names = "pwr_irq";                                                      
                                                                                                  
                bus-width = <8>;                                                                  
                non-removable;                                                                    
                                                                                                  
                vmmc-supply = <&pm660l_l4>;                                                       
                vqmmc-supply = <&pm660_l8>;                                                       
                                                                                                  
                pinctrl-names = "default";                                                        
                pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data &sdc1_rclk>;                          
                                                                                                  
                clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;                     
                clock-names = "core", "iface";                                                    
        };          

>BTW, can you please share few details of the platform that you are
>checking?
>We are not aware of any dev platform based on SDM660. This is just for 
>my info

I'm checking on the sony xperia xa2 (pioneer) smartphone.
>
>> On Tue, Jun 19, 2018 at 11:09:17AM +0530, Vijay Viswanath wrote:
>>> With SDCC5, the MCI register space got removed and the offset/order
>of
>>> several registers have changed. Based on SDCC version used and the
>register,
>>> we need to pick the base address and offset.
>>>
>>> Depends on patch series: "[PATCH V5 0/2] mmc: sdhci-msm: Configuring
>IO_PAD support for sdhci-msm"
>>>
>>> Changes since RFC:
>>> 	Dropped voltage regulator changes in sdhci-msm
>>> 	Split the "Register changes for sdcc V5" patch
>>> 	Instead of checking mci removal for deciding which base addr to
>use,
>>> 	new function pointers are defined for the 2 variants of sdcc:
>>> 		1) MCI present
>>> 		2) V5 (mci removed)
>>> 	Instead of string comparing with the compatible string from DT
>file,
>>> 	the sdhci_msm_probe will now pick the data associated with the
>>> 	compatible entry and use it to load variant specific address
>offsets
>>> 	and msm variant specific read/write ops.
>>>
>>> Changes since V1:
>>> 	Removed unused msm_reab & msm_writeb APIs
>>> 	Changed certain register addresses from uppercase to lowercase hex
>>> 	letters
>>> 	Removed extra lines and spaces
>>> 	Split "[PATCH V1 0/3] Changes for SDCC5 version" patch into two,
>>> 	one for Documentation and other for the driver changes.
>>>
>>> Changes since V2:
>>> 	Used lower case for macro function defenitions
>>> 	Removed unused function pointers for msm_readb & msm_writeb
>>>
>>>
>>> Sayali Lokhande (3):
>>>    mmc: sdhci-msm: Define new Register address map
>>>    Documentation: sdhci-msm: Add new compatible string for SDCC v5
>>>    mmc: host: Register changes for sdcc V5
>>>
>>> Vijay Viswanath (1):
>>>    mmc: sdhci-msm: Add msm version specific ops and data structures
>>>
>>>   .../devicetree/bindings/mmc/sdhci-msm.txt          |   7 +-
>>>   drivers/mmc/host/sdhci-msm.c                       | 511
>++++++++++++++++-----
>>>   2 files changed, 391 insertions(+), 127 deletions(-)
>>>
>>> -- 
>>>   Qualcomm India Private Limited, on behalf of Qualcomm Innovation
>Center, Inc.
>>> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
>Linux Foundation Collaborative Project.
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>linux-arm-msm" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>Thanks,
>Veera

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.