mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vineet Gupta <vineet.gupta1@synopsys.com>
To: Eugeniy Paltsev <eugeniy.paltsev@synopsys.com>,
	"linux-snps-arc@lists.infradead.org" 
	<linux-snps-arc@lists.infradead.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Alexey Brodkin" <alexey.brodkin@synopsys.com>
Subject: Re: [PATCH 2/5] ARCv2: introduce unaligned access under a Kconfig option
Date: Tue, 29 Jan 2019 21:44:44 +0000	[thread overview]
Message-ID: <C2D7FE5348E1B147BCA15975FBA23075014642D58D@US01WEMBX2.internal.synopsys.com> (raw)
In-Reply-To: <20190129104942.31705-3-Eugeniy.Paltsev@synopsys.com>

On 1/29/19 2:49 AM, Eugeniy Paltsev wrote:
> As of today we enable unaligned access unconditionally on ARCv2.
> Lets move it under Kconfig option so we can disable it in case of
> using HW configuration which lacks of it.
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
>  arch/arc/Kconfig                      | 8 ++++++++
>  arch/arc/include/asm/irqflags-arcv2.h | 4 ++++
>  arch/arc/kernel/intc-arcv2.c          | 4 +++-
>  3 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
> index 376366a7db81..37c8aeefa3a5 100644
> --- a/arch/arc/Kconfig
> +++ b/arch/arc/Kconfig
> @@ -387,6 +387,14 @@ config ARC_HAS_SWAPE
>  
>  if ISA_ARCV2
>  
> +config ARC_USE_UNALIGNED_MEM_ACCESS
> +	bool "Handle unaligned access in HW and use it"
> +	default y
> +	help
> +	  The ARC HS architecture supports unaligned memory access
> +	  which is disabled by default. Enable unaligned access in
> +	  hardware and use it in software.
> +
>  config ARC_HAS_LL64
>  	bool "Insn: 64bit LDD/STD"
>  	help
> diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
> index 8a4f77ea3238..9b911e2c6b31 100644
> --- a/arch/arc/include/asm/irqflags-arcv2.h
> +++ b/arch/arc/include/asm/irqflags-arcv2.h
> @@ -44,8 +44,12 @@
>  #define ARCV2_IRQ_DEF_PRIO	1
>  
>  /* seed value for status register */
> +#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
>  #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \
>  					(ARCV2_IRQ_DEF_PRIO << 1))
> +#else
> +#define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | (ARCV2_IRQ_DEF_PRIO << 1))
> +#endif /* CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS */

I'd prefer to change the define of STATUS_AD_MASK itself and keep all of this
unchanged !

>  
>  #ifndef __ASSEMBLY__
>  
> diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
> index 067ea362fb3e..84b1c7157d1b 100644
> --- a/arch/arc/kernel/intc-arcv2.c
> +++ b/arch/arc/kernel/intc-arcv2.c
> @@ -93,7 +93,9 @@ void arc_init_IRQ(void)
>  
>  	/* setup status32, don't enable intr yet as kernel doesn't want */
>  	tmp = read_aux_reg(ARC_REG_STATUS32);
> -	tmp |= STATUS_AD_MASK | (ARCV2_IRQ_DEF_PRIO << 1);
> +	if (IS_ENABLED(ARC_USE_UNALIGNED_MEM_ACCESS))
> +		tmp |= STATUS_AD_MASK;
> +	tmp |= ARCV2_IRQ_DEF_PRIO << 1;

This will change after rebase as we just need to delete the code here, done in head.S

>  	tmp &= ~STATUS_IE_MASK;
>  	asm volatile("kflag %0	\n"::"r"(tmp));
>  }


  reply	other threads:[~2019-01-29 21:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 10:49 [PATCH 0/5] " Eugeniy Paltsev
2019-01-29 10:49 ` [PATCH 1/5] ARCv2: lib: memcpy: fix doing prefetchw outside of buffer Eugeniy Paltsev
2019-01-29 10:49 ` [PATCH 2/5] ARCv2: introduce unaligned access under a Kconfig option Eugeniy Paltsev
2019-01-29 21:44   ` Vineet Gupta [this message]
2019-01-30 16:44     ` Eugeniy Paltsev
2019-01-30 16:47       ` Vineet Gupta
2019-01-29 10:49 ` [PATCH 3/5] ARCv2: Enable unaligned access in early ASM code Eugeniy Paltsev
2019-01-29 10:49 ` [PATCH 4/5] ARCv2: use unaligned access in SW Eugeniy Paltsev
2019-01-29 10:49 ` [PATCH 5/5] ARCv2: LIB: MEMCPY: fixed and optimised routine Eugeniy Paltsev
2019-01-29 21:55   ` Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=C2D7FE5348E1B147BCA15975FBA23075014642D58D@US01WEMBX2.internal.synopsys.com \
    --to=vineet.gupta1@synopsys.com \
    --cc=alexey.brodkin@synopsys.com \
    --cc=eugeniy.paltsev@synopsys.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®