From: "Andrew Marold" <andrew.marold@wlm.edial.com>
To: <linux-kernel@vger.kernel.org>
Subject: Serial ATA support in 2.4.22
Date: Wed, 1 Oct 2003 10:55:51 -0400 [thread overview]
Message-ID: <C67EF1F46A97534FADC870220F3AC8B79D4FDD@exchange.edial.office> (raw)
I just got some new Dell Precision 360's, 2 of which have SATA drives
that I'm trying to install RH9 on. I built a new kernel from the 2.4.22
sources, patched with the 2.4.22-ac4 patches. When I boot, linux
recognizes the drives, but hangs doing a partition check. Here's what I
see on the console:
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 17
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 17
ata1: dev 0 ATA, max UDMA/133, 234375000 sectors (lba48)
ata1: dev 0 configured for UDMA/133
ata2: port disabled, ignoring.
scsi0: ata_piix
scsi1: ata_piix
Vendor: ATA Model: ST3120026AS Rev: 0.71
Type: Direct-Access ANSI SCSI revision: 05
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 234375000 512-byte sectors (120000 MB)
Partition check:
sda:<3>ata1: DMA timeout, stat 0x24
Has this been seen before, or are these boxes just too far out on the
bleeding edge and I'm going to have to wait a while ?
Thanks,
Drew
Andrew Marold - Andrew.Marold@edial.com
Release Engineer - eDial Inc.
Call me for free:
http://beta.edial.com/call/Andrew_Marold
Nothing looks worse on your outdoor resume than
a list of the possible locations of your remains.
next reply other threads:[~2003-10-01 14:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-01 14:55 Andrew Marold [this message]
2003-10-01 15:13 ` Jeff Garzik
2003-10-01 16:34 ` Jeff Garzik
2003-10-02 21:42 ` Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22) Martin List-Petersen
2003-10-02 21:47 ` Jeff Garzik
2003-10-02 21:52 ` Martin List-Petersen
2003-10-02 22:00 ` Jeff Garzik
2003-10-02 22:35 ` Martin List-Petersen
2003-10-02 21:52 ` Erik Steffl
2003-10-02 21:56 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=C67EF1F46A97534FADC870220F3AC8B79D4FDD@exchange.edial.office \
--to=andrew.marold@wlm.edial.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®