From: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
To: Xie He <xie.he.0141@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Network Development <netdev@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Willem de Bruijn <willemdebruijn.kernel@gmail.com>,
Eric Dumazet <eric.dumazet@gmail.com>,
Brian Norris <briannorris@chromium.org>,
Cong Wang <xiyou.wangcong@gmail.com>
Subject: Re: [PATCH net-next] net/packet: Fix a comment about hard_header_len and add a warning for it
Date: Fri, 11 Sep 2020 16:31:54 +0200 [thread overview]
Message-ID: <CA+FuTSeOUKJYOFamA+fKBxEb22VosOXZRWGf2DungBGRorcyfg@mail.gmail.com> (raw)
In-Reply-To: <20200911050359.25042-1-xie.he.0141@gmail.com>
On Fri, Sep 11, 2020 at 7:04 AM Xie He <xie.he.0141@gmail.com> wrote:
>
> This patch tries to clarify the difference between hard_header_len and
> needed_headroom by fixing an outdated comment and adding a WARN_ON_ONCE
> warning for hard_header_len.
>
> The difference between hard_header_len and needed_headroom as understood
> by this patch is based on the following reasons:
>
> 1.
>
> In af_packet.c, the function packet_snd first reserves a headroom of
> length (dev->hard_header_len + dev->needed_headroom).
> Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header,
> which calls dev->header_ops->create, to create the link layer header.
> If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of
> length (dev->hard_header_len), and checks if the user has provided a
> header sized between (dev->min_header_len) and (dev->hard_header_len)
> (in dev_validate_header).
> This shows the developers of af_packet.c expect hard_header_len to
> be consistent with header_ops.
>
> 2.
>
> In af_packet.c, the function packet_sendmsg_spkt has a FIXME comment.
> That comment states that prepending an LL header internally in a driver
> is considered a bug. I believe this bug can be fixed by setting
> hard_header_len to 0, making the internal header completely invisible
> to af_packet.c (and requesting the headroom in needed_headroom instead).
>
> 3.
>
> There is a commit for a WiFi driver:
> commit 9454f7a895b8 ("mwifiex: set needed_headroom, not hard_header_len")
> According to the discussion about it at:
> https://patchwork.kernel.org/patch/11407493/
> The author tried to set the WiFi driver's hard_header_len to the Ethernet
> header length, and request additional header space internally needed by
> setting needed_headroom.
> This means this usage is already adopted by driver developers.
>
> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
> Cc: Eric Dumazet <eric.dumazet@gmail.com>
> Cc: Brian Norris <briannorris@chromium.org>
> Cc: Cong Wang <xiyou.wangcong@gmail.com>
> Signed-off-by: Xie He <xie.he.0141@gmail.com>
> ---
> net/packet/af_packet.c | 17 +++++++++++------
> 1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
> index af6c93ed9fa0..93c89d3b2511 100644
> --- a/net/packet/af_packet.c
> +++ b/net/packet/af_packet.c
> @@ -93,12 +93,15 @@
>
> /*
> Assumptions:
> - - if device has no dev->hard_header routine, it adds and removes ll header
> - inside itself. In this case ll header is invisible outside of device,
> - but higher levels still should reserve dev->hard_header_len.
> - Some devices are enough clever to reallocate skb, when header
> - will not fit to reserved space (tunnel), another ones are silly
> - (PPP).
> + - If the device has no dev->header_ops, there is no LL header visible
> + above the device. In this case, its hard_header_len should be 0.
> + The device may prepend its own header internally. In this case, its
> + needed_headroom should be set to the space needed for it to add its
> + internal header.
> + For example, a WiFi driver pretending to be an Ethernet driver should
> + set its hard_header_len to be the Ethernet header length, and set its
> + needed_headroom to be (the real WiFi header length - the fake Ethernet
> + header length).
> - packet socket receives packets with pulled ll header,
> so that SOCK_RAW should push it back.
>
> @@ -2936,6 +2939,8 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len)
> skb_reset_network_header(skb);
>
> err = -EINVAL;
> + if (!dev->header_ops)
> + WARN_ON_ONCE(dev->hard_header_len != 0);
> if (sock->type == SOCK_DGRAM) {
> offset = dev_hard_header(skb, dev, ntohs(proto), addr, NULL, len);
> if (unlikely(offset < 0))
From a quick scan, a few device types that might trigger this
net/atm/clip.c
drivers/net/wan/hdlc_fr.c
drivers/net/appletalk/ipddp.c
drivers/net/ppp/ppp_generic.c
drivers/net/net_failover.c
next prev parent reply other threads:[~2020-09-11 16:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-11 5:03 Xie He
2020-09-11 14:31 ` Willem de Bruijn [this message]
2020-09-11 23:37 ` Xie He
2020-09-13 8:10 ` Willem de Bruijn
2020-09-13 8:43 ` Xie He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+FuTSeOUKJYOFamA+fKBxEb22VosOXZRWGf2DungBGRorcyfg@mail.gmail.com \
--to=willemdebruijn.kernel@gmail.com \
--cc=briannorris@chromium.org \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=xie.he.0141@gmail.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®