From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: Wes Miser <buddwm@gmail.com>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Bluetooth: Add VID/PID 0489/e102 for MediaTek MT7922
Date: Mon, 17 Jul 2023 16:09:12 -0700 [thread overview]
Message-ID: <CABBYNZLE3BFLhx7ChNsLOXWP0bp01AwG2tABHNMXSCS7OA0uxQ@mail.gmail.com> (raw)
In-Reply-To: <CAHCcUCp4rgLP8SrTm_ncTe638ndWrgyz-ioicPYYXEZQZgHUYg@mail.gmail.com>
Hi Wes,
On Mon, Jul 17, 2023 at 2:41 PM Wes Miser <buddwm@gmail.com> wrote:
>
> (Re-sending in text-only mode)
>
> Hey Luiz,
>
> I noticed that this may have already been submitted per
> https://github.com/bluez/bluetooth-next/commit/159c43e9925e8f4655b8f834cbb864f5ecaf1778
> (I was building against torvalds/linux and didn't notice this in
> bluetooth-next). In any case here's the information about the device
> from my system:
>
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e102 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125u
Please rebase since apparently our CI couldn't apply it, and please
include the information above as part of the git commit description in
the v2.
>
> On Mon, Jul 17, 2023 at 2:56 PM Luiz Augusto von Dentz
> <luiz.dentz@gmail.com> wrote:
> >
> > Hi Wes,
> >
> > On Sun, Jul 16, 2023 at 8:07 PM Wes Miser <buddwm@gmail.com> wrote:
> > >
> > > Tested on Acer Swift Edge 16 Notebook
> > >
> > > Signed-off-by: Wes Miser <buddwm@gmail.com>
> > > ---
> > > drivers/bluetooth/btusb.c | 3 +++
> > > 1 file changed, 3 insertions(+)
> > >
> > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > > index 5ec4ad0a5c86..95f43d48f383 100644
> > > --- a/drivers/bluetooth/btusb.c
> > > +++ b/drivers/bluetooth/btusb.c
> > > @@ -628,6 +628,9 @@ static const struct usb_device_id blacklist_table[] = {
> > > { USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK |
> > > BTUSB_WIDEBAND_SPEECH |
> > > BTUSB_VALID_LE_STATES },
> > > + { USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK |
> > > + BTUSB_WIDEBAND_SPEECH |
> > > + BTUSB_VALID_LE_STATES },
> > >
> > > /* Additional Realtek 8723AE Bluetooth devices */
> > > { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
> > > --
> > > 2.41.0
> >
> > Please include the information from /sys/kernel/debug/usb/devices
> >
> > --
> > Luiz Augusto von Dentz
--
Luiz Augusto von Dentz
next prev parent reply other threads:[~2023-07-17 23:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-17 3:07 Wes Miser
2023-07-17 19:56 ` Luiz Augusto von Dentz
2023-07-17 21:41 ` Wes Miser
2023-07-17 23:09 ` Luiz Augusto von Dentz [this message]
2023-07-17 23:34 ` Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CABBYNZLE3BFLhx7ChNsLOXWP0bp01AwG2tABHNMXSCS7OA0uxQ@mail.gmail.com \
--to=luiz.dentz@gmail.com \
--cc=buddwm@gmail.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®