From: Chao Xie <xiechao.mail@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: mturquette@linaro.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, haojian.zhuang@gmail.com
Subject: Re: common clock framwork: clk_set_rate issue
Date: Wed, 19 Dec 2012 14:49:25 +0800 [thread overview]
Message-ID: <CADApbej8ddpgQAgr3ghMJaQfwcKk_bQe++MaHiRECzpPZNCuXg@mail.gmail.com> (raw)
In-Reply-To: <20121218074711.GU26326@pengutronix.de>
On Tue, Dec 18, 2012 at 3:47 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Tue, Dec 18, 2012 at 10:19:21AM +0800, Chao Xie wrote:
>> On Tue, Dec 18, 2012 at 4:19 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>> > On Thu, Dec 06, 2012 at 10:52:03AM +0800, Chao Xie wrote:
>> >> hi
>> >> When develop the clk drivers for SOCs based on common clock framework.
>> >> I met a issue.
>> >> For example there is a uart device, it's function clock comes from a
>> >> divider, and the divider's parent is a mux. It means
>> >>
>> >> MUX --> DIV --> UART
>> >>
>> >> As we know that UART can work at low baudrate for a terminal, while it
>> >> can also connect to GPS module which needs a high rate. So the MUX
>> >> will provide two clock source, a low clock rate and high clock rate.
>> >>
>> >> The MUX clk driver clk-mux.c does not implement a ->round_rate callbacks.
>> >> It means that when uart driver is used for a GPS and it want to change
>> >> it clock, the driver will call clk_set_rate(); clk_set_rate will loop
>> >> upward to DIV, and DIV will try to set its divider, and it need loop
>> >> upward to MUX.
>> >> In fact the current clk drivers have some issue.
>> >> MUX clk driver should provide the round_rate callback, it then can
>> >> provide a new_rate. It means that in clk_calc_subtree MUX can switch
>> >> the clock source.
>> >
>> > It's not that simple. The input clocks to a mux may not only differ in
>> > their rate but can also have other different properties, like for
>> > example one input may be always present whereas another input only runs
>> > when the CPU is in run mode.
>> >
>> > It may be a possibility to add a flag to the mux to explicitely
>> > allow reparenting on a rate change.
>> >
>> There is already a flag to do it.
>> CLK_SET_RATE_PARENT
>
> That flag has another meaning. It means that a clock is allowed to
> change the parents rate when a rate change is requested. What I meant
> is a flag that allows a mux to change its parent when a rate change is
> requested.
>
another flag can help it. what i mean is that i can clear the flag
CLK_SET_RATE_PARENT of MUX's children, so when clock changing will not
impact the MUX.
>> if the mux does not want to changes the input for clk_set_rate called
>> by its child, it can clear this flag.
>> The question is whether we need add the round_rate/recalc_rate for MUX
>> type of clock? Is there any special issue about it that why current
>> MUX implementation does not have these callbacks?
>
> They currently do not need these callbacks. When a clock does not have
> round_rate propagates up to the parent if CLK_SET_RATE_PARENT is set or
> it returns the parents rate if this flag is not set. The situation with
> set_rate is similar.
>
So it means that for a uart clock that get its clock from
MUX --> DIV --> UART
when uart want to change its rate, the driver has to know the topology
of clock tree. It can not directly clk_set_rate(uart), because it only
change the DIV settings, and if we want to change the MUX input, we
have to invoke clk_set_parent(MUX). So the uart driver need to know
the clock tree topology, and it is not good for sharing a driver
between mutiple SOCs that has same UART controller IP.
That is what i am confused about.
> Sascha
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2012-12-19 6:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-06 2:52 Chao Xie
2012-12-17 20:19 ` Sascha Hauer
2012-12-18 2:19 ` Chao Xie
2012-12-18 7:47 ` Sascha Hauer
2012-12-19 6:49 ` Chao Xie [this message]
2012-12-19 9:03 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CADApbej8ddpgQAgr3ghMJaQfwcKk_bQe++MaHiRECzpPZNCuXg@mail.gmail.com \
--to=xiechao.mail@gmail.com \
--cc=haojian.zhuang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®