From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758067AbdLRIgX (ORCPT ); Mon, 18 Dec 2017 03:36:23 -0500 Received: from smtp.csie.ntu.edu.tw ([140.112.30.61]:36112 "EHLO smtp.csie.ntu.edu.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757709AbdLRIgU (ORCPT ); Mon, 18 Dec 2017 03:36:20 -0500 X-Google-Smtp-Source: ACJfBouSg0/UPpmDxlCJ+Sh5lQX7/CYsT7PhgDETcx+AvVs+mAraptayf0Q/0DL1b6wj8FcsNonQ17eHBYfZyAlNynA= MIME-Version: 1.0 In-Reply-To: <1510558344-45402-1-git-send-email-yong.deng@magewell.com> References: <1510558344-45402-1-git-send-email-yong.deng@magewell.com> From: Chen-Yu Tsai Date: Mon, 18 Dec 2017 16:35:51 +0800 X-Gmail-Original-Message-ID: Message-ID: Subject: Re: [linux-sunxi] [PATCH v3 2/3] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI) To: Yong Deng Cc: Maxime Ripard , Mauro Carvalho Chehab , Rob Herring , Mark Rutland , Chen-Yu Tsai , "David S. Miller" , Greg Kroah-Hartman , Hans Verkuil , Randy Dunlap , Benoit Parrot , Stanimir Varbanov , Arnd Bergmann , Hugues Fruchet , Philipp Zabel , Benjamin Gaignard , Ramesh Shanmugasundaram , Yannick Fertre , Sakari Ailus , Rick Chang , Linux Media Mailing List , devicetree , linux-arm-kernel , linux-kernel , linux-sunxi , =?UTF-8?Q?Ond=C5=99ej_Jirman?= Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Nov 13, 2017 at 3:32 PM, Yong Deng wrote: > Add binding documentation for Allwinner V3s CSI. > > Signed-off-by: Yong Deng > --- > .../devicetree/bindings/media/sun6i-csi.txt | 51 ++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt > > diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt > new file mode 100644 > index 0000000..f3916a2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt > @@ -0,0 +1,51 @@ > +Allwinner V3s Camera Sensor Interface > +------------------------------ > + > +Required properties: > + - compatible: value must be "allwinner,sun8i-v3s-csi" > + - reg: base address and size of the memory-mapped region. > + - interrupts: interrupt associated to this IP > + - clocks: phandles to the clocks feeding the CSI > + * bus: the CSI interface clock > + * mod: the CSI module clock > + * ram: the CSI DRAM clock > + - clock-names: the clock names mentioned above > + - resets: phandles to the reset line driving the CSI > + > +- ports: A ports node with endpoint definitions as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + Currently, the driver only support the parallel interface. So, a single port > + node with one endpoint and parallel bus is supported. > + > +Example: > + > + csi1: csi@01cb4000 { Drop the leading zero in the address part. > + compatible = "allwinner,sun8i-v3s-csi"; > + reg = <0x01cb4000 0x1000>; > + interrupts = ; > + clocks = <&ccu CLK_BUS_CSI>, > + <&ccu CLK_CSI1_SCLK>, CSI also has an MCLK. Do you need that one? ChenYu > + <&ccu CLK_DRAM_CSI>; > + clock-names = "bus", "mod", "ram"; > + resets = <&ccu RST_BUS_CSI>; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* Parallel bus endpoint */ > + csi1_ep: endpoint { > + remote-endpoint = <&adv7611_ep>; > + bus-width = <16>; > + data-shift = <0>; > + > + /* If hsync-active/vsync-active are missing, > + embedded BT.656 sync is used */ > + hsync-active = <0>; /* Active low */ > + vsync-active = <0>; /* Active low */ > + data-active = <1>; /* Active high */ > + pclk-sample = <1>; /* Rising */ > + }; > + }; > + }; > + > -- > 1.8.3.1 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.