Re: [PATCH] net: phy: add driver for Motorcomm yt8511 phy

[Peter Geis <pgwipeout@gmail.com>]

On Tue, May 11, 2021 at 5:56 PM Russell King - ARM Linux admin
<linux@armlinux.org.uk> wrote:
>
> Hi,
>
> On Tue, May 11, 2021 at 05:46:06PM -0400, Peter Geis wrote:
> > +static int yt8511_config_init(struct phy_device *phydev)
> > +{
> > +     int ret, val, oldpage;
> > +
> > +     /* set clock mode to 125mhz */
> > +     oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE);
> > +     if (oldpage < 0)
> > +             goto err_restore_page;
> > +
> > +     val = __phy_read(phydev, YT8511_PAGE);
> > +     val |= (YT8511_CLK_125M);
> > +     ret = __phy_write(phydev, YT8511_PAGE, val);
>
> Please consider __phy_modify(), and handle any error it returns.

Hey that's really neat, thanks!

>
> > +
> > +     /* disable auto sleep */
> > +     ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL);
>
> Please consider handling a failure to write here.

Will do.

>
> > +     val = __phy_read(phydev, YT8511_PAGE);
> > +     val &= (~BIT(15));
> > +     ret = __phy_write(phydev, YT8511_PAGE, val);
>
> Also a use for __phy_modify().
>
> > +
> > +err_restore_page:
> > +     return phy_restore_page(phydev, oldpage, ret);
> > +}
> > +
> > +static struct phy_driver motorcomm_phy_drvs[] = {
> > +     {
> > +             PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
> > +             .name           = "YT8511 Gigabit Ethernet",
> > +             .config_init    = &yt8511_config_init,
>
> Please drop the '&' here, it's unnecessary.

Will do, thank you.

>
> Thanks.
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!