From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Maxime Ripard <mripard@kernel.org>
Cc: "Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Emma Anholt" <emma@anholt.net>,
"Jonathan Corbet" <corbet@lwn.net>,
"Sandy Huang" <hjc@rock-chips.com>,
"Heiko Stübner" <heiko@sntech.de>, "Chen-Yu Tsai" <wens@csie.org>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Samuel Holland" <samuel@sholland.org>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org,
"Hans Verkuil" <hverkuil@xs4all.nl>,
linux-rockchip@lists.infradead.org, linux-sunxi@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH v5 09/44] drm/connector: hdmi: Add RGB Quantization Range to the connector state
Date: Thu, 14 Dec 2023 14:46:08 +0000 [thread overview]
Message-ID: <CAPY8ntDZ+M-5Ke4oHaM3gO2BrvUxDnne3ezV6AchxFJRQPd9Cw@mail.gmail.com> (raw)
In-Reply-To: <20231207-kms-hdmi-connector-state-v5-9-6538e19d634d@kernel.org>
On Thu, 7 Dec 2023 at 15:50, Maxime Ripard <mripard@kernel.org> wrote:
>
> HDMI controller drivers will need to figure out the RGB range they need
> to configure based on a mode and property values. Let's expose that in
> the HDMI connector state so drivers can just use that value.
Again a mention that we're also adding unit tests wouldn't be amiss.
> Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 4 +-
> drivers/gpu/drm/drm_atomic_state_helper.c | 44 +++
> .../gpu/drm/tests/drm_atomic_state_helper_test.c | 335 +++++++++++++++++++++
> include/drm/drm_atomic_state_helper.h | 1 +
> include/drm/drm_connector.h | 6 +
> 5 files changed, 389 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 1465a7f09a0b..e4ad53e64e07 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -1143,9 +1143,11 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
> drm_printf(p, "\tcolorspace=%s\n", drm_get_colorspace_name(state->colorspace));
>
> if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
> - connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)
> + connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
> drm_printf(p, "\tbroadcast_rgb=%s\n",
> drm_hdmi_connector_get_broadcast_rgb_name(state->hdmi.broadcast_rgb));
> + drm_printf(p, "\tis_full_range=%c\n", state->hdmi.is_full_range ? 'y' : 'n');
> + }
>
> if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
> if (state->writeback_job && state->writeback_job->fb)
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 10d98620a358..4a7114978c47 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -31,6 +31,7 @@
> #include <drm/drm_connector.h>
> #include <drm/drm_crtc.h>
> #include <drm/drm_device.h>
> +#include <drm/drm_edid.h>
> #include <drm/drm_framebuffer.h>
> #include <drm/drm_plane.h>
> #include <drm/drm_print.h>
> @@ -636,6 +637,47 @@ int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
> }
> EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
>
> +static const struct drm_display_mode *
> +connector_state_get_mode(const struct drm_connector_state *conn_state)
> +{
> + struct drm_atomic_state *state;
> + struct drm_crtc_state *crtc_state;
> + struct drm_crtc *crtc;
> +
> + state = conn_state->state;
> + if (!state)
> + return NULL;
> +
> + crtc = conn_state->crtc;
> + if (!crtc)
> + return NULL;
> +
> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> + if (!crtc_state)
> + return NULL;
> +
> + return &crtc_state->mode;
> +}
> +
> +static bool hdmi_is_full_range(const struct drm_connector *connector,
> + const struct drm_connector_state *state)
> +{
> + const struct drm_display_info *display = &connector->display_info;
> + const struct drm_display_mode *mode =
> + connector_state_get_mode(state);
> +
> + if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_FULL)
> + return true;
> +
> + if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_LIMITED)
> + return false;
> +
> + if (!display->is_hdmi)
> + return true;
> +
> + return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
> +}
> +
> /**
> * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
> * @connector: DRM Connector
> @@ -656,6 +698,8 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
> struct drm_connector_state *new_state =
> drm_atomic_get_new_connector_state(state, connector);
>
> + new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);
> +
> if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb) {
> struct drm_crtc *crtc = new_state->crtc;
> struct drm_crtc_state *crtc_state;
> diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> index 21e6f796ee13..7750c3d214a4 100644
> --- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> +++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> @@ -328,7 +328,342 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes
> KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
> }
>
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to auto with a mode that isn't the
> + * VIC-1 mode, we will get a limited RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *preferred;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_AUTO);
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to auto with a VIC-1 mode, we will get
> + * a full RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *mode;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + mode = drm_display_mode_from_cea_vic(drm, 1);
> + KUNIT_ASSERT_NOT_NULL(test, mode);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_AUTO);
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to full with a mode that isn't the
> + * VIC-1 mode, we will get a full RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *preferred;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_FULL);
> +
> + KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to full with a VIC-1 mode, we will get
> + * a full RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *mode;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + mode = drm_display_mode_from_cea_vic(drm, 1);
> + KUNIT_ASSERT_NOT_NULL(test, mode);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_FULL);
> +
> + KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to limited with a mode that isn't the
> + * VIC-1 mode, we will get a limited RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *preferred;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_LIMITED);
> +
> + KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to limited with a VIC-1 mode, we will
> + * get a limited RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *mode;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + mode = drm_display_mode_from_cea_vic(drm, 1);
> + KUNIT_ASSERT_NOT_NULL(test, mode);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_LIMITED);
> +
> + KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
> +}
> +
> static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
> + KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode_vic_1),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode_vic_1),
> KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
> KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
> { }
> diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
> index d59d2b3aef9a..8072ac18e536 100644
> --- a/include/drm/drm_atomic_state_helper.h
> +++ b/include/drm/drm_atomic_state_helper.h
> @@ -88,6 +88,7 @@ void
> __drm_atomic_helper_connector_destroy_state(struct drm_connector_state *state);
> void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
> struct drm_connector_state *state);
> +
> void __drm_atomic_helper_private_obj_duplicate_state(struct drm_private_obj *obj,
> struct drm_private_state *state);
>
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 3867a4c01b78..76eecd449fb8 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1066,6 +1066,12 @@ struct drm_connector_state {
> * Broadcast RGB selection value.
> */
> enum drm_hdmi_broadcast_rgb broadcast_rgb;
> +
> + /**
> + * @is_full_range: Is the output supposed to use a full
> + * RGB Quantization Range or not?
> + */
> + bool is_full_range;
> } hdmi;
> };
>
>
> --
> 2.43.0
>
next prev parent reply other threads:[~2023-12-14 14:46 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-07 15:49 [PATCH v5 00/44] drm/connector: Create HDMI Connector infrastructure Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 01/44] drm/tests: helpers: Include missing drm_drv header Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 02/44] drm/tests: helpers: Add atomic helpers Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 03/44] drm/tests: Add helper to create mock plane Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 04/44] drm/tests: Add helper to create mock crtc Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 05/44] drm/tests: connector: Add tests for drmm_connector_init Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 06/44] drm/connector: Introduce an HDMI connector initialization function Maxime Ripard
2023-12-14 14:39 ` Dave Stevenson
2023-12-07 15:49 ` [PATCH v5 07/44] drm/connector: hdmi: Create an HDMI sub-state Maxime Ripard
2023-12-14 14:40 ` Dave Stevenson
2023-12-07 15:49 ` [PATCH v5 08/44] drm/connector: hdmi: Add Broadcast RGB property Maxime Ripard
2023-12-14 14:43 ` Dave Stevenson
2024-01-12 13:59 ` Maxime Ripard
2024-01-12 15:59 ` Dave Stevenson
2024-01-15 14:33 ` Sebastian Wick
2024-01-15 14:37 ` Sebastian Wick
2024-01-15 15:30 ` Maxime Ripard
2024-02-02 13:01 ` Maxime Ripard
2024-02-02 15:40 ` Ville Syrjälä
2024-02-02 15:59 ` Maxime Ripard
2024-02-02 16:37 ` Ville Syrjälä
2024-02-05 9:39 ` Maxime Ripard
2024-02-09 20:34 ` Sebastian Wick
2024-02-12 10:01 ` Maxime Ripard
2024-02-12 15:49 ` Ville Syrjälä
2024-02-12 16:39 ` Hans Verkuil
2024-02-12 17:00 ` Maxime Ripard
2024-02-12 16:53 ` Re: Re: Re: " Maxime Ripard
2024-02-12 17:06 ` Sebastian Wick
2024-02-15 11:00 ` Maxime Ripard
2024-02-19 14:01 ` Sebastian Wick
2024-02-22 10:54 ` Maxime Ripard
2024-02-22 12:58 ` Ville Syrjälä
2024-02-22 13:12 ` Sebastian Wick
2024-02-22 13:20 ` Maxime Ripard
2024-02-13 8:38 ` Re: Re: Re: Re: " Ville Syrjälä
2024-02-15 10:53 ` Maxime Ripard
2024-02-15 15:09 ` Ville Syrjälä
2024-01-15 15:25 ` Maxime Ripard
2024-01-18 21:21 ` Sebastian Wick
2024-02-02 11:04 ` Jani Nikula
2024-02-02 11:20 ` Hans Verkuil
2024-02-02 16:35 ` Ville Syrjälä
2024-02-02 15:49 ` Maxime Ripard
2024-02-09 20:30 ` Sebastian Wick
2024-02-12 9:55 ` Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 09/44] drm/connector: hdmi: Add RGB Quantization Range to the connector state Maxime Ripard
2023-12-14 14:46 ` Dave Stevenson [this message]
2023-12-07 15:49 ` [PATCH v5 10/44] drm/connector: hdmi: Add output BPC " Maxime Ripard
2023-12-14 14:48 ` Dave Stevenson
2023-12-07 15:49 ` [PATCH v5 11/44] drm/connector: hdmi: Add support for output format Maxime Ripard
2023-12-14 14:52 ` Dave Stevenson
2023-12-07 15:49 ` [PATCH v5 12/44] drm/connector: hdmi: Add HDMI compute clock helper Maxime Ripard
2023-12-14 15:02 ` Dave Stevenson
2023-12-07 15:49 ` [PATCH v5 13/44] drm/connector: hdmi: Calculate TMDS character rate Maxime Ripard
2023-12-14 15:04 ` Dave Stevenson
2023-12-07 15:49 ` [PATCH v5 14/44] drm/connector: hdmi: Add custom hook to filter " Maxime Ripard
2023-12-14 15:06 ` Dave Stevenson
2023-12-07 15:49 ` [PATCH v5 15/44] drm/connector: hdmi: Compute bpc and format automatically Maxime Ripard
2023-12-14 15:10 ` Dave Stevenson
2024-02-01 12:51 ` Maxime Ripard
2024-02-01 15:33 ` Dave Stevenson
2024-02-01 16:50 ` Maxime Ripard
2024-02-02 13:58 ` Jani Nikula
2023-12-07 15:49 ` [PATCH v5 16/44] drm/connector: hdmi: Add Infoframes generation Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 17/44] drm/connector: hdmi: Create Infoframe DebugFS entries Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 18/44] drm/vc4: hdmi: Create destroy state implementation Maxime Ripard
2023-12-12 11:40 ` Dave Stevenson
2023-12-14 8:48 ` Maxime Ripard
2023-12-13 15:22 ` (subset) " Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 19/44] drm/vc4: hdmi: Switch to HDMI connector Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 20/44] drm/vc4: tests: Remove vc4_dummy_plane structure Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 21/44] drm/vc4: tests: Convert to plane creation helper Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 22/44] drm/rockchip: inno_hdmi: Remove useless mode_fixup Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 23/44] drm/rockchip: inno_hdmi: Remove useless copy of drm_display_mode Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 24/44] drm/rockchip: inno_hdmi: Switch encoder hooks to atomic Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 25/44] drm/rockchip: inno_hdmi: Get rid of mode_set Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 26/44] drm/rockchip: inno_hdmi: no need to store vic Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 27/44] drm/rockchip: inno_hdmi: Remove unneeded has audio flag Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 28/44] drm/rockchip: inno_hdmi: Remove useless input format Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 29/44] drm/rockchip: inno_hdmi: Remove useless output format Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 30/44] drm/rockchip: inno_hdmi: Remove useless colorimetry Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 31/44] drm/rockchip: inno_hdmi: Remove useless enum Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 32/44] drm/rockchip: inno_hdmi: Remove tmds rate from structure Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 33/44] drm/rockchip: inno_hdmi: Remove useless coeff_csc matrix Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 34/44] drm/rockchip: inno_hdmi: Remove useless mode_valid Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 35/44] drm/rockchip: inno_hdmi: Drop HDMI Vendor Infoframe support Maxime Ripard
2023-12-07 15:49 ` [PATCH v5 36/44] drm/rockchip: inno_hdmi: Move infoframe disable to separate function Maxime Ripard
2023-12-07 15:50 ` [PATCH v5 37/44] drm/rockchip: inno_hdmi: Switch to infoframe type Maxime Ripard
2023-12-07 15:50 ` [PATCH v5 38/44] drm/rockchip: inno_hdmi: Remove unused drm device pointer Maxime Ripard
2023-12-07 15:50 ` [PATCH v5 39/44] drm/rockchip: inno_hdmi: Switch to HDMI connector Maxime Ripard
2023-12-07 15:50 ` [PATCH v5 40/44] drm/sun4i: hdmi: Convert encoder to atomic Maxime Ripard
2023-12-21 14:33 ` [v5,40/44] " Sui Jingfeng
2023-12-07 15:50 ` [PATCH v5 41/44] drm/sun4i: hdmi: Move mode_set into enable Maxime Ripard
2023-12-21 14:43 ` [v5,41/44] " Sui Jingfeng
2023-12-07 15:50 ` [PATCH v5 42/44] drm/sun4i: hdmi: Switch to container_of_const Maxime Ripard
2023-12-07 15:50 ` [PATCH v5 43/44] drm/sun4i: hdmi: Consolidate atomic_check and mode_valid Maxime Ripard
2023-12-21 14:53 ` [v5,43/44] " Sui Jingfeng
2023-12-07 15:50 ` [PATCH v5 44/44] drm/sun4i: hdmi: Switch to HDMI connector Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPY8ntDZ+M-5Ke4oHaM3gO2BrvUxDnne3ezV6AchxFJRQPd9Cw@mail.gmail.com \
--to=dave.stevenson@raspberrypi.com \
--cc=airlied@gmail.com \
--cc=corbet@lwn.net \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=emma@anholt.net \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=hverkuil@xs4all.nl \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=samuel@sholland.org \
--cc=tzimmermann@suse.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®