From: "Luca Weiss" <luca.weiss@fairphone.com>
To: "Bjorn Andersson" <andersson@kernel.org>
Cc: <cros-qcom-dts-watchers@chromium.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Srinivasa Rao Mandadapu" <quic_srivasam@quicinc.com>,
"Mohammad Rafi Shaik" <quic_mohs@quicinc.com>,
<~postmarketos/upstreaming@lists.sr.ht>,
<phone-devel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH DNM 2/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support
Date: Wed, 29 May 2024 08:18:41 +0200 [thread overview]
Message-ID: <D1LWRSO8RFAI.1PQ450TISFN2D@fairphone.com> (raw)
In-Reply-To: <hqwrfe2tcb6vlxybmn52k3j2xrxbt3vw5rqwudindbhj3s3nez@obkr3ayos6gm>
On Tue May 28, 2024 at 11:35 PM CEST, Bjorn Andersson wrote:
> On Fri, May 10, 2024 at 02:27:09PM GMT, Luca Weiss wrote:
> > Add the required nodes for sound playback via a connected external
> > display (DisplayPort over USB-C).
> >
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > ---
> > Depends on a bunch of patches upstream doing bringup of Display (DSI),
> > DisplayPort, GPU, and then finally audio could land. But we're blocked
> > on DPU 1:1:1 topology for all of that unfortunately.
> >
> > And also machine driver for sound just exists a bit hackily.
>
> Thanks for sharing this, Luca. Can you please resubmit this once it's
> ready to be merged, so that I don't need to keep track of it?
Definitely, though I don't expect it to be soon unfortunately, maybe you
can ask your colleagues though to fix that DPU 1:1:1 topology ;)
>
> Regards,
> Bjorn
>
> > ---
> > arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 36 ++++++++++++++++++++++
> > 1 file changed, 36 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> > index 05bbf1da5cb8..2bbbcaeff95e 100644
> > --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> > +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> > @@ -14,6 +14,8 @@
> > #include <dt-bindings/leds/common.h>
> > #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> > #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> > +#include <dt-bindings/sound/qcom,q6afe.h>
> > +#include <dt-bindings/sound/qcom,q6asm.h>
> > #include "sc7280.dtsi"
> > #include "pm7250b.dtsi"
> > #include "pm7325.dtsi"
> > @@ -774,6 +776,12 @@ &pon_resin {
> > status = "okay";
> > };
> >
> > +&q6afedai {
> > + dai@104 {
> > + reg = <DISPLAY_PORT_RX>;
> > + };
> > +};
> > +
> > &qup_spi13_cs {
> > drive-strength = <6>;
> > bias-disable;
> > @@ -847,6 +855,34 @@ &sdhc_2 {
> > status = "okay";
> > };
> >
> > +&sound {
> > + compatible = "fairphone,fp5-sndcard";
> > + model = "Fairphone 5";
> > +
> > + mm1-dai-link {
> > + link-name = "MultiMedia1";
> > + cpu {
> > + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
> > + };
> > + };
> > +
> > + displayport-rx-dai-link {
> > + link-name = "DisplayPort Playback";
> > +
> > + cpu {
> > + sound-dai = <&q6afedai DISPLAY_PORT_RX>;
> > + };
> > +
> > + platform {
> > + sound-dai = <&q6routing>;
> > + };
> > +
> > + codec {
> > + sound-dai = <&mdss_dp>;
> > + };
> > + };
> > +};
> > +
> > &spi13 {
> > status = "okay";
> >
> >
> > --
> > 2.45.0
> >
next prev parent reply other threads:[~2024-05-29 6:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 12:27 [PATCH 0/2] Add basic APR sound support for SC7280 SoC Luca Weiss
2024-05-10 12:27 ` [PATCH 1/2] arm64: dts: qcom: sc7280: Add APR nodes for sound Luca Weiss
2024-05-10 12:27 ` [PATCH DNM 2/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support Luca Weiss
2024-05-28 21:35 ` Bjorn Andersson
2024-05-29 6:18 ` Luca Weiss [this message]
2024-05-10 13:53 ` [PATCH 0/2] Add basic APR sound support for SC7280 SoC Rob Herring (Arm)
2024-05-28 3:32 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D1LWRSO8RFAI.1PQ450TISFN2D@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=quic_mohs@quicinc.com \
--cc=quic_srivasam@quicinc.com \
--cc=robh@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®