mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Christopher Snowhill" <chris@kode54.net>
To: "Tobias Jakobi" <tjakobi@math.uni-bielefeld.de>,
	<amd-gfx@lists.freedesktop.org>,
	<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 0/2] drm/amd: fix VRR race condition during IRQ handling
Date: Mon, 09 Sep 2024 01:26:34 -0700	[thread overview]
Message-ID: <D41LZTT7K2N5.10I6PS6B05IDG@kode54.net> (raw)
In-Reply-To: <deb6d962-f24e-4769-b313-be3b0efb873b@math.uni-bielefeld.de>

On Sun Sep 8, 2024 at 4:23 AM PDT, Tobias Jakobi wrote:
> On 9/8/24 09:35, Christopher Snowhill wrote:
>
> > On Mon Sep 2, 2024 at 2:40 AM PDT, tjakobi wrote:
> >> From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
> >>
> >> Hello,
> >>
> >> this fixes a nasty race condition in the set_drr() callbacks for DCN10
> >> and DCN35 that has existed now since quite some time, see this GitLab
> >> issue for reference.
> >>
> >> https://gitlab.freedesktop.org/drm/amd/-/issues/3142
> >>
> >> The report just focuses von DCN10, but the same problem also exists in
> >> the DCN35 code.
> > Does the problem not exist in the following references to funcs->set_drr?
> >
> > drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c:      if (pipe_ctx->stream_res.tg->funcs->set_drr)
> > drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c:              pipe_ctx->stream_res.tg->funcs->set_drr(
> > drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c:              pipe_ctx[i]->stream_res.tg->funcs->set_drr(
> > drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c:        if (pipe_ctx->stream_res.tg->funcs->set_drr)
> > drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c:                pipe_ctx->stream_res.tg->funcs->set_drr(
> > drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c:                if (pipe_ctx->stream_res.tg->funcs->set_drr)
> > drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c:                        pipe_ctx->stream_res.tg->funcs->set_drr(
> > drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c:        if (pipe_ctx->stream_res.tg->funcs->set_drr)
> > drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c:                pipe_ctx->stream_res.tg->funcs->set_drr(
> > drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c:      if (pipe_ctx->stream_res.tg->funcs->set_drr)
> > drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c:              pipe_ctx->stream_res.tg->funcs->set_drr(
>
> Maybe. But the big difference I see here, is that in this code there 
> isn't even any kind of NULL check applied to tg. Or most of the members 
> of *pipe_ctx. If there really is the same kind of problem here, then one 
> would need to rewrite a bit more code to fix stuff.
>
> E.g. in the case of  dcn31_hwseq.c, the questionable code is in 
> dcn31_reset_back_end_for_pipe(), which is static and only called from 
> dcn31_reset_hw_ctx_wrap(). Which is assigned to the .reset_hw_ctx_wrap 
> callback. And this specific callback, from what I can see, is only 
> called from dce110_reset_hw_ctx_wrap(). Which is then assigned to the 
> .apply_ctx_to_hw callback. The callback is only called from 
> dc_commit_state_no_check(). That one is static again, and called from 
> dc_commit_streams().
>
> I could trace this even further. My point is: I don't think this is 
> called from any IRQ handler code. And given the depth and complexity of 
> the callgraph, I have to admit, that, at least at this point, this is a 
> bit over my head.
>
> Sure, I could now sprinkle a bunch of x != NULL in the code, but that 
> would be merely voodoo. And I usually try to have a theoretical basis 
> when I apply changes to code.
>
> Maybe if someone from the AMD display team could give some insight if 
> there still is potentially vulnerable code in some of the instances that 
> Christopher has posted, then I would gladly take a look.

Sorry, I was taking a note from someone else who mentioned set_drr functions, and wasn't aware that none of the other implementations happen to be called from IRQ handlers. Thanks for looking into this.

-Christopher

> With best wishes,
> Tobias
>
> >
> >> With best wishes,
> >> Tobias
> >>
> >> Tobias Jakobi (2):
> >>    drm/amd/display: Avoid race between dcn10_set_drr() and
> >>      dc_state_destruct()
> >>    drm/amd/display: Avoid race between dcn35_set_drr() and
> >>      dc_state_destruct()
> >>
> >>   .../amd/display/dc/hwss/dcn10/dcn10_hwseq.c   | 20 +++++++++++--------
> >>   .../amd/display/dc/hwss/dcn35/dcn35_hwseq.c   | 20 +++++++++++--------
> >>   2 files changed, 24 insertions(+), 16 deletions(-)


  reply	other threads:[~2024-09-09  8:26 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-02  9:40 tjakobi
2024-09-02  9:40 ` [PATCH 1/2] drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct() tjakobi
2024-09-02 11:03   ` Sefa Eyeoglu
2024-09-02 14:43   ` raoul.van.rueschen
2024-09-03  5:13   ` Christopher Snowhill
2024-09-03 21:27   ` Harry Wentland
2024-09-02  9:40 ` [PATCH 2/2] drm/amd/display: Avoid race between dcn35_set_drr() " tjakobi
2024-09-03 21:28   ` Harry Wentland
2024-09-08  7:35 ` [PATCH 0/2] drm/amd: fix VRR race condition during IRQ handling Christopher Snowhill
2024-09-08 11:23   ` Tobias Jakobi
2024-09-09  8:26     ` Christopher Snowhill [this message]
2024-09-09 17:11     ` Alex Deucher
2024-09-09 17:18       ` Harry Wentland
2024-09-09 19:36         ` Tobias Jakobi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=D41LZTT7K2N5.10I6PS6B05IDG@kode54.net \
    --to=chris@kode54.net \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tjakobi@math.uni-bielefeld.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome