From: Torrey Hoffman <torrey.hoffman@myrio.com>
To: "'Roy Sigurd Karlsbakk'" <roy@karlsbakk.net>,
linux-kernel@vger.kernel.org
Cc: lars.nakkerud@compaq.com
Subject: RE: Tuning Linux for high-speed disk subsystems
Date: Tue, 13 Nov 2001 12:38:46 -0800 [thread overview]
Message-ID: <D52B19A7284D32459CF20D579C4B0C0211CAC3@mail0.myrio.com> (raw)
Roy Sigurd Karlsbakk wrote:
> After some testing at Compaq's lab in Oslo, I've come to the
> conclusion
> that Linux cannot scale higher than about 30-40MB/sec in or out of a
> hardware or software RAID-0 set with several stripe/chunk
> sizes tried out.
Hmmm. I saw "dbench 32" results of 73 MB / second using Linux
software RAID-0 and IDE. However, I suppose some of that
was due to caching, and not hardware throughput.
Details: 2.4.9-ac17, 4 x Maxtor 5400 RPM, 60 GB hard drives,
2 x Promise TX-2 controllers, using UDMA-100, one drive / cable,
dual PIII-800, reiserfs, RAID - 0 with chunk-size = 1024
Torrey
next reply other threads:[~2001-11-13 20:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-13 20:38 Torrey Hoffman [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-11-22 10:15 Martin Knoblauch
2001-11-22 16:30 ` Andreas Dilger
[not found] <3B6867E6CB09B24385A73719A50C7C9A79791F@athena.boxxtech.com>
2001-11-16 16:53 ` Marvin Justice
2001-11-16 2:56 Dieter Nützel
2001-11-16 11:51 ` Roy Sigurd Karlsbakk
2001-11-16 15:24 ` Dieter Nützel
2001-11-13 15:58 Jesse Pollard
2001-11-13 14:29 Roy Sigurd Karlsbakk
2001-11-13 16:43 ` Ragnar Kjørstad
2001-11-13 16:51 ` Alan Cox
2001-11-13 17:59 ` Craig I. Hagan
2001-11-13 16:18 ` Marcelo Tosatti
2001-11-14 10:33 ` Roy Sigurd Karlsbakk
2001-11-14 10:35 ` Roy Sigurd Karlsbakk
2001-11-13 20:00 ` Dan Hollis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D52B19A7284D32459CF20D579C4B0C0211CAC3@mail0.myrio.com \
--to=torrey.hoffman@myrio.com \
--cc=lars.nakkerud@compaq.com \
--cc=linux-kernel@vger.kernel.org \
--cc=roy@karlsbakk.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®