Re: [PATCH 04/11] power: supply: pmi8998_charger: rename to qcom_smbx

["Luca Weiss" <luca.weiss@fairphone.com>]

On Thu Jun 19, 2025 at 4:55 PM CEST, Casey Connolly wrote:
> Prepare to add smb5 support by making variables and the file name more
> generic. Also take the opportunity to remove the "_charger" suffix since
> smb2 always refers to a charger.
>
> Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
> ---
>  drivers/power/supply/Makefile                      |   2 +-
>  .../supply/{qcom_pmi8998_charger.c => qcom_smbx.c} | 148 ++++++++++-----------
>  2 files changed, 75 insertions(+), 75 deletions(-)
>
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 4f5f8e3507f80da02812f0d08c2d81ddff0a272f..f943c9150b326d41ff241f82610f70298635eb08 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -119,6 +119,6 @@ obj-$(CONFIG_RN5T618_POWER)	+= rn5t618_power.o
>  obj-$(CONFIG_BATTERY_ACER_A500)	+= acer_a500_battery.o
>  obj-$(CONFIG_BATTERY_SURFACE)	+= surface_battery.o
>  obj-$(CONFIG_CHARGER_SURFACE)	+= surface_charger.o
>  obj-$(CONFIG_BATTERY_UG3105)	+= ug3105_battery.o
> -obj-$(CONFIG_CHARGER_QCOM_SMB2)	+= qcom_pmi8998_charger.o
> +obj-$(CONFIG_CHARGER_QCOM_SMB2)	+= qcom_smbx.o

While you may want to keep the CONFIG_ name the same, the description
should be updated, at least in the SMB5 commit.

  │ Say Y here to enable the Qualcomm PMIC Charger driver. This
  │ adds support for the SMB2 switch mode battery charger found
  │ in PMI8998 and related PMICs.

Regards
Luca