From: Roy Im <roy.im.opensource@diasemi.com>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Roy Im" <roy.im.opensource@diasemi.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Brian Masney <masneyb@onstation.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Greg KH <gregkh@linuxfoundation.org>,
Lee Jones <lee.jones@linaro.org>, Luca Weiss <luca@z3ntu.xyz>,
Maximilian Luz <luzmaximilian@gmail.com>,
Pascal PAILLET-LME <p.paillet@st.com>,
Rob Herring <robh@kernel.org>,
Samuel Ortiz <sameo@linux.intel.com>,
Thierry Reding <thierry.reding@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
Support Opensource <Support.Opensource@diasemi.com>,
"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-pwm@vger.kernel.org" <linux-pwm@vger.kernel.org>
Subject: RE: [RESEND PATCH V13 3/3] Input: new da7280 haptic driver
Date: Wed, 24 Jun 2020 12:04:24 +0000 [thread overview]
Message-ID: <DB8PR10MB3356697B41C0FB97F5FD330185950@DB8PR10MB3356.EURPRD10.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <20200623144105.mxhcrtezbghjb2vb@taurus.defre.kleine-koenig.org>
Hello Uwe,
On Tue, June 23, 2020 11:41 PM, Uwe Kleine-König wrote:
>
> Hello,
>
> On Mon, Jun 15, 2020 at 08:40:23PM +0900, Roy Im wrote:
> > Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple
> > mode and integrated waveform memory and wideband support.
> > It communicates via an I2C bus to the device.
> >
> > Signed-off-by: Roy Im <roy.im.opensource@diasemi.com>
>
> Just some picky comments below.
>
> > + error = pwm_apply_state(haptics->pwm_dev, &state);
> > + if (error)
> > + dev_err(haptics->dev,
> > + "failed to apply pwm state: %pE\n",
> > + ERR_PTR(error));
>
> You can save some horizontal space here by dropping the \n after the first comma. (There are a few more occurences.)
>
Ok, is this what you want?
error = pwm_apply_state(haptics->pwm_dev, &state);
if (error)
dev_err(haptics->dev, "failed to apply pwm state: %pE\n",
ERR_PTR(error));
> > + return error;
> > +}
> > +[...]
> > +
> > + /* Sync up PWM state and ensure it is off. */
> > + pwm_init_state(haptics->pwm_dev, &state);
> > + state.enabled = false;
> > + error = pwm_apply_state(haptics->pwm_dev, &state);
> > + if (error) {
> > + dev_err(dev,
> > + "failed to apply initial PWM state: %pE\n",
> > + ERR_PTR(error));
> > + return error;
> > + }
> > +
> > + /* Check PWM Period, it must be in 10k ~ 250kHz */
>
> The unit of a PWM period is in (nano)seconds, to it cannot be in the range [10kHz, 250kHz]. (Is this too picky?)
No, it isn't. The 'Period' should be changed to 'frequency', I will fix this as below.
/* Check PWM frequency, valid range: 10k ~ 250kHz */
>
> > + period2freq = 1000000 / state.period;
> > + if (period2freq < DA7280_MIN_PWM_FREQ_KHZ ||
> > + period2freq > DA7280_MAX_PWM_FREQ_KHZ) {
> > + dev_err(dev, "Not supported PWM frequency(%d)\n",
> > + period2freq);
>
> Doesn't the compiler warn here about period2freq being unsigned and %d being for signed int values?
>
> For my (non-native) English ear s/Not supported/Unsupported/ sounds better. Also my eyes would be pleases by a space
> before the opening brace.
I didn't see any warning message, but I will change/improve them to proper one and the log as below.
period2freq = 1000000 / state.period;
if (period2freq < DA7280_MIN_PWM_FREQ_KHZ ||
period2freq > DA7280_MAX_PWM_FREQ_KHZ) {
dev_err(dev, "Unsupported PWM frequency (%u)\n",
period2freq);
return -EINVAL;
}
If you look ok, let me update this so.
>
> > + return -EINVAL;
> > + }
> > + }
> > +
> > +
> > +[...]
> > +static struct i2c_driver da7280_driver = {
> > + .driver = {
> > + .name = "da7280",
> > + .of_match_table = of_match_ptr(da7280_of_match),
> > + .pm = &da7280_pm_ops,
>
> I don't like alignment of =, but I'm aware this is a subjective thing.
> (The reason for me is that adding a new member that is longer than the already existing requires touching all lines. So I
> stick to a single space before a =.)
OK, I will do as you said.
>
> > + },
> > + .probe = da7280_probe,
> > + .id_table = da7280_i2c_id,
> > +};
> > +module_i2c_driver(da7280_driver);
> > +
> > +MODULE_DESCRIPTION("DA7280 haptics driver"); MODULE_AUTHOR("Roy Im
> > +<Roy.Im.Opensource@diasemi.com>");
> > +MODULE_LICENSE("GPL");
> > --
> > end-of-patch for RESEND PATCH V13
>
> Best regards
> Uwe
>
> --
> Pengutronix e.K. | Uwe Kleine-König |
> Industrial Linux Solutions | https://www.pengutronix.de/ |
next prev parent reply other threads:[~2020-06-24 12:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-15 11:40 [RESEND PATCH V13 0/3] da7280: haptic driver submission Roy Im
2020-06-15 11:40 ` [RESEND PATCH V13 1/3] MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Roy Im
2020-06-15 11:40 ` [RESEND PATCH V13 2/3] dt-bindings: input: Add document bindings for DA7280 Roy Im
2020-06-15 11:40 ` [RESEND PATCH V13 3/3] Input: new da7280 haptic driver Roy Im
2020-06-23 14:41 ` Uwe Kleine-König
2020-06-24 12:04 ` Roy Im [this message]
2020-06-24 13:37 ` Uwe Kleine-König
2020-06-24 15:39 ` Roy Im
2020-06-24 16:28 ` Uwe Kleine-König
2020-06-24 16:56 ` Roy Im
-- strict thread matches above, loose matches on Subject: below --
2020-05-21 9:24 [RESEND PATCH V13 0/3] da7280: haptic driver submission Roy Im
2020-05-21 9:24 ` [RESEND PATCH V13 3/3] Input: new da7280 haptic driver Roy Im
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB8PR10MB3356697B41C0FB97F5FD330185950@DB8PR10MB3356.EURPRD10.PROD.OUTLOOK.COM \
--to=roy.im.opensource@diasemi.com \
--cc=Support.Opensource@diasemi.com \
--cc=bgolaszewski@baylibre.com \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=luca@z3ntu.xyz \
--cc=luzmaximilian@gmail.com \
--cc=masneyb@onstation.org \
--cc=p.paillet@st.com \
--cc=robh@kernel.org \
--cc=sameo@linux.intel.com \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®