From: "Diederik de Haas" <didi.debian@cknow.org>
To: "Sebastian Reichel" <sebastian.reichel@collabora.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
"Zhang Rui" <rui.zhang@intel.com>,
"Lukasz Luba" <lukasz.luba@arm.com>,
"Heiko Stuebner" <heiko@sntech.de>
Cc: <linux-pm@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-rockchip@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <kernel@collabora.com>
Subject: Re: [PATCH] thermal: rockchip: shut up GRF warning
Date: Wed, 20 Aug 2025 16:23:06 +0200 [thread overview]
Message-ID: <DC7BMRFU4CZP.1R3PY4OJVGJHE@cknow.org> (raw)
In-Reply-To: <20250818-thermal-rockchip-grf-warning-v1-1-134152c97097@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 7220 bytes --]
Hi Sebastian,
On Mon Aug 18, 2025 at 7:26 PM CEST, Sebastian Reichel wrote:
> Most of the recent Rockchip devices do not have a GRF associated
> with the tsadc IP. Let's avoid printing a warning on those devices.
Thanks for this patch :-)
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
> drivers/thermal/rockchip_thermal.c | 53 +++++++++++++++++++++++++++++++++-----
> 1 file changed, 46 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 3beff9b6fac3abe8948b56132b618ff1bed57217..1e8091cebd6673ab39fa0c4dee835c68aeb7e8b5 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -50,6 +50,18 @@ enum adc_sort_mode {
> ADC_INCREMENT,
> };
>
> +/*
> + * The GRF availability depends on the specific SoC
> + * GRF_NONE: the SoC does not have a GRF associated with the tsadc
> + * GRF_OPTIONAL: the SoC has a GRF, but the driver can work without it
> + * GRF_MANDATORY: the SoC has a GRF and it is required for proper operation
> + */
> +enum tsadc_grf_mode {
> + GRF_NONE,
> + GRF_OPTIONAL,
> + GRF_MANDATORY,
> +};
> +
> #include "thermal_hwmon.h"
>
> /**
> @@ -97,6 +109,9 @@ struct rockchip_tsadc_chip {
> enum tshut_mode tshut_mode;
> enum tshut_polarity tshut_polarity;
>
> + /* GRF availability */
> + enum tsadc_grf_mode grf_mode;
> +
> /* Chip-wide methods */
> void (*initialize)(struct regmap *grf,
> void __iomem *reg, enum tshut_polarity p);
> @@ -1099,6 +1114,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 2, /* 2 channels for tsadc */
>
> + .grf_mode = GRF_MANDATORY,
> +
> .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> .tshut_temp = 95000,
>
> @@ -1123,6 +1140,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 1, /* one channel for tsadc */
>
> + .grf_mode = GRF_NONE,
> +
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1148,6 +1167,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 1, /* one channel for tsadc */
>
> + .grf_mode = GRF_NONE,
> +
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1173,6 +1194,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> .chn_offset = 1,
> .chn_num = 2, /* two channels for tsadc */
>
> + .grf_mode = GRF_NONE,
> +
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1198,6 +1221,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 1, /* one channels for tsadc */
>
> + .grf_mode = GRF_NONE,
> +
> .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> .tshut_temp = 95000,
>
> @@ -1222,6 +1247,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 2, /* two channels for tsadc */
>
> + .grf_mode = GRF_OPTIONAL,
> +
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1247,6 +1274,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 2, /* two channels for tsadc */
>
> + .grf_mode = GRF_NONE,
> +
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1272,6 +1301,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 2, /* two channels for tsadc */
>
> + .grf_mode = GRF_OPTIONAL,
> +
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1297,6 +1328,8 @@ static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
> .chn_offset = 0,
> .chn_num = 2, /* two channels for tsadc */
>
> + .grf_mode = GRF_OPTIONAL,
> +
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1321,6 +1354,7 @@ static const struct rockchip_tsadc_chip rk3576_tsadc_data = {
> /* top, big_core, little_core, ddr, npu, gpu */
> .chn_offset = 0,
> .chn_num = 6, /* six channels for tsadc */
> + .grf_mode = GRF_NONE,
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1345,6 +1379,7 @@ static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
> /* top, big_core0, big_core1, little_core, center, gpu, npu */
> .chn_offset = 0,
> .chn_num = 7, /* seven channels for tsadc */
> + .grf_mode = GRF_NONE,
> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> .tshut_temp = 95000,
> @@ -1572,7 +1607,7 @@ static int rockchip_configure_from_dt(struct device *dev,
> struct device_node *np,
> struct rockchip_thermal_data *thermal)
> {
> - u32 shut_temp, tshut_mode, tshut_polarity;
> + u32 shut_temp, tshut_mode, tshut_polarity, ret;
>
> if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
> dev_warn(dev,
> @@ -1621,12 +1656,16 @@ static int rockchip_configure_from_dt(struct device *dev,
> return -EINVAL;
> }
>
> - /* The tsadc wont to handle the error in here since some SoCs didn't
> - * need this property.
> - */
> - thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> - if (IS_ERR(thermal->grf))
> - dev_warn(dev, "Missing rockchip,grf property\n");
> + if (thermal->chip->grf_mode != GRF_NONE) {
> + thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> + if (IS_ERR(thermal->grf)) {
> + ret = PTR_ERR(thermal->grf);
> + if (thermal->chip->grf_mode == GRF_OPTIONAL)
> + dev_warn(dev, "Missing rockchip,grf property\n");
> + else
> + return dev_err_probe(dev, ret, "Missing rockchip,grf property\n");
> + }
> + }
>
> rockchip_get_trim_configuration(dev, np, thermal);
I tested this patch on the following devices and found no regressions:
- Rock64 (rk3328)
- RockPro64 (rk3399)
- Quartz64 Model B (rk3566)
- NanoPi R5S (rk3568)
When tested on my Rock 5B (rk3588), I no longer saw this warning:
rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
And found no regressions, so
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Cheers,
Diederik
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
prev parent reply other threads:[~2025-08-20 14:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-18 17:26 Sebastian Reichel
2025-08-18 18:44 ` Heiko Stübner
2025-08-18 19:23 ` Sebastian Reichel
2025-08-18 19:47 ` Heiko Stübner
2025-08-19 10:19 ` kernel test robot
2025-08-19 12:42 ` Robin Murphy
2025-08-19 13:56 ` Sebastian Reichel
2025-08-19 14:13 ` Heiko Stübner
2025-08-20 14:23 ` Diederik de Haas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DC7BMRFU4CZP.1R3PY4OJVGJHE@cknow.org \
--to=didi.debian@cknow.org \
--cc=daniel.lezcano@linaro.org \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lukasz.luba@arm.com \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®