Hi, On Mon Sep 29, 2025 at 9:35 AM CEST, Rudraksha Gupta via B4 Relay wrote: > From: Ondrej Jirman > > Pinephone Pro uses STK3311 according to the schematics. > ... > Co-developed-by: Martijn Braam > Signed-off-by: Martijn Braam > Co-developed-by: Kamil Trzciński > Signed-off-by: Kamil Trzciński > Signed-off-by: Ondrej Jirman > Signed-off-by: Rudraksha Gupta > --- > arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts > index 6f97e57f36f5599f4027a0f3db98bcbc69cef5e5..71d32c4bae0d0336ac0c912043618fc9b94919ef 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts > @@ -520,6 +520,15 @@ touchscreen@14 { > touchscreen-size-x = <720>; > touchscreen-size-y = <1440>; > }; > + > + light-sensor@48 { > + compatible = "sensortek,stk3311"; > + reg = <0x48>; > + interrupt-parent = <&gpio4>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&stk3311_int>; > + }; > }; > > &i2c4 { > @@ -689,6 +698,12 @@ vcc1v8_codec_en: vcc1v8-codec-en { > }; > }; > > + stk3311 { > + stk3311_int: stk3311-int { > + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_input_pull_up>; On page 11 and 17 of PPP schematic V1.0-20211127 I see LIGHT_INT_L as identifier so it's best to use that identifier here, thus ``light_int_l: light-int-l {`` and update the pinctrl-0 reference accordingly. Cheers, Diederik > + }; > + }; > + > wireless-bluetooth { > bt_wake_pin: bt-wake-pin { > rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;