From: "Kaustabh Chakraborty" <kauschluss@disroot.org>
To: "André Draszik" <andre.draszik@linaro.org>,
"Kaustabh Chakraborty" <kauschluss@disroot.org>,
"Lee Jones" <lee@kernel.org>, "Pavel Machek" <pavel@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"MyungJoo Ham" <myungjoo.ham@samsung.com>,
"Chanwoo Choi" <cw00.choi@samsung.com>,
"Sebastian Reichel" <sre@kernel.org>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>
Cc: <linux-leds@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<linux-samsung-soc@vger.kernel.org>, <linux-rtc@vger.kernel.org>,
<linux-doc@vger.kernel.org>
Subject: Re: [PATCH v2 07/12] mfd: sec: store hardware revision in sec_pmic_dev and add S2MU005 support
Date: Wed, 04 Feb 2026 20:35:49 +0530 [thread overview]
Message-ID: <DG69QZBG97G3.1458CJYT0YG9C@disroot.org> (raw)
In-Reply-To: <f6d1340062448cf52e4c034d250524e030877898.camel@linaro.org>
On 2026-02-04 14:17 +00:00, André Draszik wrote:
> Hi Kaustabh,
>
> On Mon, 2026-01-26 at 00:37 +0530, Kaustabh Chakraborty wrote:
>> The device revision matters in cases when in some PMICs, the correct
>> register offsets very in different revisions. Instead of just debug
>
> s/very/vary
>
>> printing the value, store it in the driver data struct.
>
> Please mention that you're not doing that for s2mpg1x, though.
>
>>
>> Unlike other devices, S2MU005 has its hardware revision ID in register
>> offset 0x73. Allow handling different devices and add support for S2MU005.
>>
>> Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
>> ---
>> drivers/mfd/sec-common.c | 41 ++++++++++++++++++++++++++++++----------
>> include/linux/mfd/samsung/core.h | 1 +
>> 2 files changed, 32 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
>> index bc2a1f2c6dc7a..069a1ba9aa1f1 100644
>> --- a/drivers/mfd/sec-common.c
>> +++ b/drivers/mfd/sec-common.c
>> @@ -16,6 +16,7 @@
>> #include <linux/mfd/samsung/irq.h>
>> #include <linux/mfd/samsung/s2mps11.h>
>> #include <linux/mfd/samsung/s2mps13.h>
>> +#include <linux/mfd/samsung/s2mu005.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> #include <linux/pm.h>
>> @@ -111,17 +112,38 @@ static const struct mfd_cell s2mu005_devs[] = {
>> MFD_CELL_OF("s2mu005-rgb", NULL, NULL, 0, 0, "samsung,s2mu005-rgb"),
>> };
>>
>> -static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
>> +static int sec_pmic_store_rev(struct sec_pmic_dev *sec_pmic)
>> {
>> - unsigned int val;
>> + unsigned int reg, mask, shift;
>> + int ret;
>>
>> - /* For s2mpg1x, the revision is in a different regmap */
>> - if (sec_pmic->device_type == S2MPG10)
>> - return;
>> + switch (sec_pmic->device_type) {
>> + case S2MPG10:
>> + /* For s2mpg1x, the revision is in a different regmap */
>> + return 0;
>> + case S2MU005:
>> + reg = S2MU005_REG_ID;
>> + mask = S2MU005_ID_MASK;
>> + shift = S2MU005_ID_SHIFT;
>> + break;
>> + default:
>> + /* For other device types, the REG_ID is always the first register. */
>> + reg = S2MPS11_REG_ID;
>> + mask = ~0;
>> + shift = 0;
>> + }
>> +
>> + ret = regmap_read(sec_pmic->regmap_pmic, reg, &sec_pmic->revision);
>> + if (ret) {
>> + dev_err(sec_pmic->dev, "Failed to read PMIC revision (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + sec_pmic->revision &= mask;
>> + sec_pmic->revision >>= shift;
>>
>> - /* For each device type, the REG_ID is always the first register */
>> - if (!regmap_read(sec_pmic->regmap_pmic, S2MPS11_REG_ID, &val))
>> - dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val);
>> + dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", sec_pmic->revision);
>> + return 0;
>> }
>>
>> static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic)
>> @@ -262,9 +284,8 @@ int sec_pmic_probe(struct device *dev, int device_type, unsigned int irq,
>> return ret;
>>
>> sec_pmic_configure(sec_pmic);
>> - sec_pmic_dump_rev(sec_pmic);
>>
>> - return ret;
>> + return sec_pmic_store_rev(sec_pmic);
>> }
>> EXPORT_SYMBOL_GPL(sec_pmic_probe);
>>
>> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
>> index 43e0c5e55f5d3..56aa33d7e3d60 100644
>> --- a/include/linux/mfd/samsung/core.h
>> +++ b/include/linux/mfd/samsung/core.h
>> @@ -70,6 +70,7 @@ struct sec_pmic_dev {
>>
>> int device_type;
>> int irq;
>> + unsigned int revision;
>
> kerneldoc needs to be updated.
Seems like it needs cleanup anyway, I will send a patch for that
separately (if this patch gets dropped in the next rev, see below).
>
> Given the LED driver is the only driver & device so far which needs the
> PMIC revision, maybe for now that driver could determine the revision
> itself instead of adding this new member for everybody?
Hmm, implementing that would make this patch redundant. I'll do so.
>
> Cheers,
> Andre'
>
>> };
>>
>> struct sec_platform_data {
next prev parent reply other threads:[~2026-02-04 15:06 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-25 19:07 [PATCH v2 00/12] Support for Samsung S2MU005 PMIC and its sub-devices Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 01/12] dt-bindings: leds: document Samsung S2M series PMIC flash LED device Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 02/12] dt-bindings: leds: document Samsung S2M series PMIC RGB " Kaustabh Chakraborty
2026-02-06 13:38 ` Rob Herring
2026-02-06 13:56 ` Kaustabh Chakraborty
2026-02-06 14:03 ` Kaustabh Chakraborty
2026-02-08 13:05 ` Jacek Anaszewski
2026-01-25 19:07 ` [PATCH v2 03/12] dt-bindings: extcon: document Samsung S2M series PMIC extcon device Kaustabh Chakraborty
2026-02-06 13:49 ` Rob Herring
2026-02-06 13:52 ` Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 04/12] dt-bindings: power: supply: document Samsung S2M series PMIC charger device Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 05/12] dt-bindings: mfd: s2mps11: add documentation for S2MU005 PMIC Kaustabh Chakraborty
2026-01-25 20:59 ` Rob Herring (Arm)
2026-01-25 19:07 ` [PATCH v2 06/12] mfd: sec: add support " Kaustabh Chakraborty
2026-01-26 19:41 ` kernel test robot
2026-02-04 15:23 ` André Draszik
2026-02-05 15:32 ` Kaustabh Chakraborty
2026-02-10 9:55 ` André Draszik
2026-02-20 16:56 ` Sander Vanheule
2026-02-23 13:56 ` Kaustabh Chakraborty
2026-02-09 4:03 ` [PATCH FIX] mfd: sec-irq: fix non-constant case labels in s2mu005_irq_get_reg Łukasz Lebiedziński
2026-02-09 9:56 ` David Laight
2026-02-09 13:12 ` Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 07/12] mfd: sec: store hardware revision in sec_pmic_dev and add S2MU005 support Kaustabh Chakraborty
2026-02-04 14:17 ` André Draszik
2026-02-04 15:05 ` Kaustabh Chakraborty [this message]
2026-02-05 16:26 ` Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 08/12] leds: flash: add support for Samsung S2M series PMIC flash LED device Kaustabh Chakraborty
2026-02-04 16:55 ` André Draszik
2026-02-05 16:16 ` Kaustabh Chakraborty
2026-02-10 10:03 ` André Draszik
2026-02-10 18:37 ` Kaustabh Chakraborty
2026-02-05 10:54 ` André Draszik
2026-01-25 19:07 ` [PATCH v2 09/12] leds: rgb: add support for Samsung S2M series PMIC RGB " Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 10/12] Documentation: leds: document pattern behavior of Samsung S2M series PMIC RGB LEDs Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 11/12] extcon: add support for Samsung S2M series PMIC extcon devices Kaustabh Chakraborty
2026-01-25 19:07 ` [PATCH v2 12/12] power: supply: add support for Samsung S2M series PMIC charger device Kaustabh Chakraborty
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DG69QZBG97G3.1458CJYT0YG9C@disroot.org \
--to=kauschluss@disroot.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andre.draszik@linaro.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®