Re: [PATCH 0/7] rtc: sun6i: Add support for Allwinner A733 SoC

["Junhui Liu" <junhui.liu@pigmoral.tech>]

Hi Jernej,
Thanks for your review.

On Sun Feb 22, 2026 at 6:41 PM CST, Jernej Škrabec wrote:
> Hi!
>
> Dne sreda, 21. januar 2026 ob 11:59:06 Srednjeevropski standardni čas je Junhui Liu napisal(a):
>> Add support for the Allwinner A733 RTC and its internal Clock Control
>> Unit (CCU). Reuse the rtc-sun6i rtc driver while introducing a new
>> SoC-specific RTC CCU driver to handle the hardware's evolved clock
>> structure.
>> 
>> To facilitate this addition and improve driver modularity, transition
>> the binding between the RTC and its internal CCU from direct
>> cross-subsystem function calls to the auxiliary bus. Also extract shared
>> IOSC and 32kHz clock logic into a standalone ccu_rtc module for reuse
>> across newer SoC generations.
>> 
>> The A733 implementation supports hardware detection of three external
>> crystal frequencies (19.2MHz, 24MHz and 26MHz), which is represented in
>> the driver via read-only mux operations. Implement logic to derive a
>> normalized 32kHz reference from these DCXO sources using fixed
>> pre-dividers. Additionally, provide several new DCXO gate clocks for
>> peripherals, including SerDes, HDMI, and UFS.
>
> This work looks nice, but I have some questions/comments:
> - you're missing RTC SPI clock, which is needed for RTC, at least according
>   to vendor 5.15 DT. Could it be that this bit set by vendor U-Boot so you
>   missed it during testing? Manual says that it's disabled by default.

You're right! I tried disabling the RTC SPI clock in U-Boot and found
that the output of UART became garbled during booting kernel. I will add
it in the next version.

> - Vendor DT has strange RTC CCU phandles for UFS and HDMI. In first case
>   uses RTC wakeup and in second DCXO, which doesn't make any sense. Did you
>   do any experimentation with these clocks? It wouldn't be the first time
>   that either code or manual contained some kind of error.

Regarding UFS, I am still working on getting UFS functional on the
mainline kernel. I will investigate the actual relationship between the
RTC wakeup clock and UFS during this process.

As for HDMI, I believe it actually requires the hosc_hdmi_clk
(DCXO_HDMI_GATING in the manual) provided by the RTC module.

>
> Btw, switch last two patches. With current order during bisection you would
> get a complaint that A733 RTC CCU driver is not present.

Okay, I will do it.

>
> Best regards,
> Jernej

-- 
Best regards,
Junhui Liu