From: "Junhui Liu" <junhui.liu@pigmoral.tech>
To: "Junhui Liu" <junhui.liu@pigmoral.tech>,
"Stephen Boyd" <sboyd@kernel.org>,
"Brian Masney" <bmasney+clk@redhat.com>,
"Jerome Brunet" <jbrunet+clk@baylibre.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Chen-Yu Tsai" <wens@kernel.org>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Samuel Holland" <samuel@sholland.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Paul Walmsley" <pjw@kernel.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Alexandre Ghiti" <alex@ghiti.fr>,
"Richard Cochran" <richardcochran@gmail.com>
Cc: <linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-sunxi@lists.linux.dev>, <linux-kernel@vger.kernel.org>,
<linux-riscv@lists.infradead.org>, <netdev@vger.kernel.org>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Enzo Adriano" <enzo.adriano.code@gmail.com>,
"Andre Przywara" <andre.przywara@arm.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v5 0/8] clk: sunxi-ng: Add support for Allwinner A733 CCU and PRCM
Date: Sat, 03 Oct 2026 20:52:08 +0800 [thread overview]
Message-ID: <DLV7TXB5Q2PM.EYY9YISYPCR@pigmoral.tech> (raw)
In-Reply-To: <20260930-a733-clk-v5-0-11175b41cd2d@pigmoral.tech>
Hi folks,
Gentle ping on this series.
It would be great if this could make it into v7.4, as other A733 drivers
can then be developed on top of the clock/reset support provided by this
series.
On Wed Sep 30, 2026 at 1:26 AM CST, Junhui Liu wrote:
> Add support for the main CCU and the PRCM module (R-CCU) found in the
> Allwinner A733 SoC. The clock architecture is derived from the previous
> A523 design, with the MCU_CCU removed and the clock tree extended for
> the additional functional blocks found on the A733.
>
> The A733 introduces a "pll-ref" clock that normalizes the physical
> oscillator frequency, which can be 19.2MHz, 24MHz, or 26MHz, into a
> consistent 24MHz reference for the PLL clock tree.
>
> The peripheral, video, and DE PLLs provide multiple independently gated
> outputs with programmable dividers. Model these outputs as separate
> divider-and-gate child clocks. Also follow the documented hierarchy for
> the derived peripheral PLL outputs. The explicitly named PLL_AUDIO1 /2
> and /5 outputs are modeled as fixed-factor clocks, with their divider
> fields initialized accordingly.
>
> Also extend the sunxi-ng SDM (Sigma-Delta Modulation) support for the
> dual-pattern register layout used by the A733 PLLs. PLL_AUDIO0 uses the
> dual-pattern SDM support to synthesize its fractional output.
> PLL_AUDIO1 does not expose fractional rates, but its SDM controls are
> modeled so that stale settings left by firmware can be disabled when an
> integer rate is programmed.
>
> The actual parents of a small number of bus gates are not documented in
> the user manual. Follow the vendor BSP and keep these gates parented to
> "hosc" until more complete hardware information is available.
>
> This series depends on the A523 single-divider clock fixes [1], which
> add feature support to the M-only clock macro used by the MBUS and DRAM0
> clocks. The prerequisite series has been applied to the
> sunxi/clk-for-7.4 branch.
>
> Link: https://patch.msgid.link/20260906-sunxi-clk-no-p-v1-0-cbde21c9fe69@pigmoral.tech [1]
> Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
> ---
> Changes in v5:
> - Add the CLK_GIC binding ID, inserted after CLK_TRACE
> - Add the GIC clock and mark it critical
> - Fix the continuation line alignment of the trace clock
> - Mark ahb-cpus critical
> - Link to v4: https://patch.msgid.link/20260921-a733-clk-v4-0-9c184ebe9ac1@pigmoral.tech
>
> Changes in v4:
> - Model the MBUS and DRAM0 clocks as M-only clocks
> - Base the series on the A523 single-divider clock fixes
> - Link to v3: https://patch.msgid.link/20260905-a733-clk-v3-0-50f238f39c78@pigmoral.tech
>
> Changes in v3:
> - Patch 1: Rename the clock/reset binding headers with the allwinner vendor
> prefix, use BSD-2-Clause for their dual license, and reorder the binding
> properties according to the preferred schema layout
> - Patches 1 and 4: Drop the undocumented 12X suffix from the video and DE
> PLL core clock names and binding IDs
> - Patch 2: Require all PAT1 enable bits to be set when checking whether SDM
> is enabled
> - Patch 4: Model the independently gated peripheral, video, and DE PLL
> outputs as programmable-divider child clocks
> - Patch 4: Follow the documented hierarchy for the derived peripheral PLL
> outputs
> - Patch 4: Model the explicitly named PLL_AUDIO1 /2 and /5 outputs as
> fixed-factor clocks and initialize their divider fields accordingly
> - Patch 4: Model the PLL_AUDIO1 SDM controls so stale firmware settings are
> disabled when an integer rate is programmed
> - Patch 4: Add the missing module device table and remove an unused include
> - Patch 6: Replace the MP helpers used by timer clocks, which have no M
> divider, with the corresponding P-only helpers
> - Patch 7: Document the unresolved parents of bus gates kept on hosc and
> fix the APB/AHB IOMMU1 system clock names
> - Patches 3 and 8: Make the reset maps const
> - Link to v2: https://patch.msgid.link/20260711-a733-clk-v2-0-974d188cbe0c@pigmoral.tech
>
> Changes in v2:
> - Rework the clocks property in DT bindings to source hosc directly from
> the oscillator to adapt to the new RTC binding
> - Clean up the SDM dual-pattern helper macro and add the missing enable
> parameter for pll-audio0
> - Number single-instance clocks with 0, e.g. GPU0, VE_ENC0/VE_DEC0,
> DRAM0, NAND0, GPADC0, THS0, etc
> - Correct 8x PLL post-divider names to 12x for video and DE PLLs
> (pll-videoX-12x, pll-de-12x)
> - Drop gic, cpu-peri, nsi clocks
> - Rename clocks: OWA -> SPDIF, USB_REF -> USB01_REF, HDMI_ESM -> HDCP_ESM,
> PWMCTRL -> PWM
> - Mark bus-dram0, ahb-store and mbus-store critical to avoid DMA, MMC and
> SPI NOR failures when unused clocks are disabled
> - Switch PRCM timer clocks to P-only helpers
> - Fix bus gate bit positions for UARTs and correct the sysdap register
> address
> - Interleave bus clocks into function clocks
> - Link to v1: https://lore.kernel.org/r/20260310-a733-clk-v1-0-36b4e9b24457@pigmoral.tech
>
> ---
> Junhui Liu (8):
> dt-bindings: clk: sun60i-a733-ccu: Add Allwinner A733 support
> clk: sunxi-ng: sdm: Add dual patterns support
> clk: sunxi-ng: a733: Add PRCM CCU
> clk: sunxi-ng: a733: Add PLL clocks support
> clk: sunxi-ng: a733: Add bus clocks support
> clk: sunxi-ng: a733: Add mod clocks support
> clk: sunxi-ng: a733: Add bus clock gates
> clk: sunxi-ng: a733: Add reset lines
>
> .../bindings/clock/allwinner,sun60i-a733-ccu.yaml | 107 +
> drivers/clk/sunxi-ng/Kconfig | 10 +
> drivers/clk/sunxi-ng/Makefile | 4 +
> drivers/clk/sunxi-ng/ccu-sun60i-a733-r.c | 273 +++
> drivers/clk/sunxi-ng/ccu-sun60i-a733.c | 2406 ++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu_sdm.c | 52 +-
> drivers/clk/sunxi-ng/ccu_sdm.h | 29 +-
> .../dt-bindings/clock/allwinner,sun60i-a733-ccu.h | 291 +++
> .../clock/allwinner,sun60i-a733-r-ccu.h | 39 +
> .../dt-bindings/reset/allwinner,sun60i-a733-ccu.h | 129 ++
> .../reset/allwinner,sun60i-a733-r-ccu.h | 23 +
> 11 files changed, 3337 insertions(+), 26 deletions(-)
> ---
> base-commit: e5e04726cdd043e309677071ab1b65a4b18f422b
> change-id: 20260202-a733-clk-0d4fc00a9f9c
> prerequisite-message-id: <20260906-sunxi-clk-no-p-v1-0-cbde21c9fe69@pigmoral.tech>
> prerequisite-patch-id: 0df2ae41836b86fd868dfa01ddfde57f888f761a
> prerequisite-patch-id: 88f3a431e7c551a9fa732f062188f10fdd362eeb
> prerequisite-patch-id: 3e88bc873c909059d1199f82cda4013765e7a5e5
> prerequisite-patch-id: 0dbc27cd7417352319a0705a051dff35085e8922
>
> Best regards,
> --
> Junhui Liu <junhui.liu@pigmoral.tech>
--
Best regards,
Junhui Liu
next prev parent reply other threads:[~2026-10-03 12:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 17:26 Junhui Liu
2026-09-29 17:26 ` [PATCH v5 1/8] dt-bindings: clk: sun60i-a733-ccu: Add Allwinner A733 support Junhui Liu
2026-09-29 17:26 ` [PATCH v5 2/8] clk: sunxi-ng: sdm: Add dual patterns support Junhui Liu
2026-09-29 17:26 ` [PATCH v5 3/8] clk: sunxi-ng: a733: Add PRCM CCU Junhui Liu
2026-10-03 14:00 ` Chen-Yu Tsai
2026-10-03 14:57 ` Junhui Liu
2026-10-03 16:51 ` Norman Herms
2026-10-03 14:57 ` Norman Herms
2026-09-29 17:26 ` [PATCH v5 4/8] clk: sunxi-ng: a733: Add PLL clocks support Junhui Liu
2026-10-04 10:08 ` Chen-Yu Tsai
2026-09-29 17:26 ` [PATCH v5 5/8] clk: sunxi-ng: a733: Add bus " Junhui Liu
2026-10-04 10:20 ` Chen-Yu Tsai
2026-09-29 17:26 ` [PATCH v5 6/8] clk: sunxi-ng: a733: Add mod " Junhui Liu
2026-09-29 17:26 ` [PATCH v5 7/8] clk: sunxi-ng: a733: Add bus clock gates Junhui Liu
2026-10-04 11:03 ` Chen-Yu Tsai
2026-10-04 11:14 ` AW: " Norman Herms
2026-09-29 17:26 ` [PATCH v5 8/8] clk: sunxi-ng: a733: Add reset lines Junhui Liu
2026-10-04 11:04 ` Chen-Yu Tsai
2026-10-03 12:52 ` Junhui Liu [this message]
2026-10-03 13:37 ` [PATCH v5 0/8] clk: sunxi-ng: Add support for Allwinner A733 CCU and PRCM Chen-Yu Tsai
2026-10-03 13:51 ` Norman Herms
2026-10-03 14:35 ` Junhui Liu
2026-10-03 15:05 ` Norman Herms
2026-10-03 15:23 ` Junhui Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DLV7TXB5Q2PM.EYY9YISYPCR@pigmoral.tech \
--to=junhui.liu@pigmoral.tech \
--cc=alex@ghiti.fr \
--cc=andre.przywara@arm.com \
--cc=aou@eecs.berkeley.edu \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=enzo.adriano.code@gmail.com \
--cc=jbrunet+clk@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=sboyd@kernel.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®