From: "Gary Guo" <gary@garyguo.net>
To: "Mathieu Desnoyers" <mathieu.desnoyers@efficios.com>,
"Paul E . McKenney" <paulmck@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
"Linus Torvalds" <torvalds@linux-foundation.org>,
"Boqun Feng" <boqun.feng@gmail.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Sebastian Andrzej Siewior" <bigeasy@linutronix.de>,
"Will Deacon" <will@kernel.org>,
"Peter Zijlstra" <peterz@infradead.org>,
"Alan Stern" <stern@rowland.harvard.edu>,
"John Stultz" <jstultz@google.com>,
"Frederic Weisbecker" <frederic@kernel.org>,
"Joel Fernandes" <joel@joelfernandes.org>,
"Josh Triplett" <josh@joshtriplett.org>,
"Uladzislau Rezki" <urezki@gmail.com>,
"Steven Rostedt" <rostedt@goodmis.org>,
"Lai Jiangshan" <jiangshanlai@gmail.com>,
"Zqiang" <qiang.zhang1211@gmail.com>,
"Ingo Molnar" <mingo@redhat.com>,
"Waiman Long" <longman@redhat.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Vlastimil Babka" <vbabka@suse.cz>, <maged.michael@gmail.com>,
"Mateusz Guzik" <mjguzik@gmail.com>,
"Gary Guo" <gary@garyguo.net>, <rcu@vger.kernel.org>,
<linux-mm@kvack.org>, <lkmm@lists.linux.dev>,
"Nikita Popov" <github@npopov.com>, <llvm@lists.linux.dev>,
"Lian Wang" <lianux.mm@gmail.com>,
"Kunwu Chan" <kunwu.chan@gmail.com>
Subject: Re: [PATCH hazptr v2 2/4] ptreq.h: Introduce ptr_eq() to preserve address dependency
Date: Fri, 09 Oct 2026 22:55:58 +0100 [thread overview]
Message-ID: <DM0N5L0LG9P0.6IFXMJX60P92@garyguo.net> (raw)
In-Reply-To: <20261009182142.6311-3-mathieu.desnoyers@efficios.com>
On Fri Oct 9, 2026 at 7:21 PM BST, Mathieu Desnoyers wrote:
> Compiler CSE and SSA GVN optimizations can cause the address dependency
> of addresses returned by rcu_dereference to be lost when comparing those
> pointers with either constants or previously loaded pointers.
>
> Introduce ptr_eq() to compare two addresses while preserving the address
> dependencies for later use of the address. It should be used when
> comparing an address returned by rcu_dereference().
>
> This is needed to prevent the compiler CSE and SSA GVN optimizations
> from using @a (or @b) in places where the source refers to @b (or @a)
> based on the fact that after the comparison, the two are known to be
> equal, which does not preserve address dependencies and allows the
> following misordering speculations:
>
> - If @b is a constant, the compiler can issue the loads which depend
> on @a before loading @a.
> - If @b is a register populated by a prior load, weakly-ordered
> CPUs can speculate loads which depend on @a before loading @a.
>
> The same logic applies with @a and @b swapped.
>
> The header "linux/ptreq.h" is the expected include target. It
> contains the documentation of the ptr_eq() API.
>
> An architecture specific implementation of the pointer comparison
> can be implemented by each architecture as asm/ptreq.h. The x86
> implementation is provided initially. If no implementation header is
> present for the architecture, an arch-agnostic fallback based on
> OPTIMIZER_HIDE_VAR is included from asm-generic.
>
> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
> Suggested-by: Boqun Feng <boqun.feng@gmail.com>
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Cc: "Paul E. McKenney" <paulmck@kernel.org>
> Cc: Will Deacon <will@kernel.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Boqun Feng <boqun.feng@gmail.com>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: John Stultz <jstultz@google.com>
> Cc: Linus Torvalds <torvalds@linux-foundation.org>
> Cc: Boqun Feng <boqun.feng@gmail.com>
> Cc: Frederic Weisbecker <frederic@kernel.org>
> Cc: Joel Fernandes <joel@joelfernandes.org>
> Cc: Josh Triplett <josh@joshtriplett.org>
> Cc: Uladzislau Rezki <urezki@gmail.com>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Lai Jiangshan <jiangshanlai@gmail.com>
> Cc: Zqiang <qiang.zhang1211@gmail.com>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Waiman Long <longman@redhat.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Vlastimil Babka <vbabka@suse.cz>
> Cc: maged.michael@gmail.com
> Cc: Mateusz Guzik <mjguzik@gmail.com>
> Cc: Gary Guo <gary@garyguo.net>
> Cc: rcu@vger.kernel.org
> Cc: linux-mm@kvack.org
> Cc: lkmm@lists.linux.dev
> Cc: Nikita Popov <github@npopov.com>
> Cc: llvm@lists.linux.dev
> Cc: Lian Wang <lianux.mm@gmail.com>
> Cc: Kunwu Chan <kunwu.chan@gmail.com>
> ---
> Changes since v1:
> - Move to linux/ptreq.h, implement x86-specific comparison
> and asm-generic header (fallback).
>
> Changes since v0:
> - Include feedback from Alan Stern.
> ---
> arch/x86/include/asm/ptreq.h | 16 +++++++++
> include/asm-generic/Kbuild | 1 +
> include/asm-generic/ptreq.h | 16 +++++++++
I agree with Boqun that this should be ptr_eq. There is no need to save that
character :)
> include/linux/ptreq.h | 63 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 96 insertions(+)
> create mode 100644 arch/x86/include/asm/ptreq.h
> create mode 100644 include/asm-generic/ptreq.h
> create mode 100644 include/linux/ptreq.h
>
> diff --git a/arch/x86/include/asm/ptreq.h b/arch/x86/include/asm/ptreq.h
> new file mode 100644
> index 000000000000..593b45f80451
> --- /dev/null
> +++ b/arch/x86/include/asm/ptreq.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _ASM_X86_PTREQ_H
> +#define _ASM_X86_PTREQ_H
> +
> +#include <linux/types.h>
> +#include <asm/asm.h>
> +
> +static __always_inline
> +bool ptr_eq(const volatile void *a, const volatile void *b)
> +{
> + bool ret;
> + asm(__ASM_SIZE(cmp) " %1,%2" : "=@ccz" (ret) : "r" (a), "r" (b));
> + return ret;
> +}
> +
> +#endif /* _ASM_X86_PTREQ_H */
> diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
> index 2bc00c67dc54..e1d95dea09d5 100644
> --- a/include/asm-generic/Kbuild
> +++ b/include/asm-generic/Kbuild
> @@ -47,6 +47,7 @@ mandatory-y += percpu.h
> mandatory-y += percpu_types.h
> mandatory-y += pgalloc.h
> mandatory-y += preempt.h
> +mandatory-y += ptreq.h
> mandatory-y += rqspinlock.h
> mandatory-y += runtime-const.h
> mandatory-y += rwonce.h
> diff --git a/include/asm-generic/ptreq.h b/include/asm-generic/ptreq.h
> new file mode 100644
> index 000000000000..db5a88628b1e
> --- /dev/null
> +++ b/include/asm-generic/ptreq.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __ASM_GENERIC_PTREQ_H
> +#define __ASM_GENERIC_PTREQ_H
> +
> +#include <linux/types.h>
> +#include <linux/compiler.h>
> +
> +static __always_inline
> +bool ptr_eq(const volatile void *a, const volatile void *b)
I suppose this is `const volatile` to take advantage of implicit conversion that
adds cv-qualifiers to be added implicitly. Might worth a mention in somewhere
(commit message maybe) because I was confused for a second on why this needs
to be volatile.
> +{
> + OPTIMIZER_HIDE_VAR(a);
> + OPTIMIZER_HIDE_VAR(b);
> + return a == b;
> +}
One thought on inline assembly. For RISC-V, branching with comparison is a
single instruction, but there's no instruction for obtaining the boolean for
a == b.
One option is to do
static __always_inline
bool ptr_eq_likely(const volatile void *a, const volatile void *b) {
asm goto ("bne %0, %1, %l2" : : "r" (a), "r" (b) :: not_eq);
return true;
not_eq:
return likely(false);
}
and then the optimizer can turn a ptr_eq call + a branch to a single
instruction. This, however, would require likely + unlikely variants.
Alternatively, we can just not have all the complexity, and just emit one extra
instruction:
static __always_inline
bool ptr_eq(const volatile void *a, const volatile void *b) {
unsigned long diff;
asm("xor %0, %1, %2" : "=r" (diff) : "r" (a), "r" (b));
return diff == 0;
}
Thoughts?
Best,
Gary
next prev parent reply other threads:[~2026-10-09 21:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 18:21 [PATCH hazptr v2 0/4] Hazard pointer updates Mathieu Desnoyers
2026-10-09 18:21 ` [PATCH hazptr v2 1/4] hazptr: Fix two-phase hazptr_synchronize race with detach Mathieu Desnoyers
2026-10-09 18:21 ` [PATCH hazptr v2 2/4] ptreq.h: Introduce ptr_eq() to preserve address dependency Mathieu Desnoyers
2026-10-09 19:03 ` Boqun Feng
2026-10-09 19:07 ` Mathieu Desnoyers
2026-10-09 21:55 ` Gary Guo [this message]
2026-10-09 18:21 ` [PATCH hazptr v2 3/4] Documentation: RCU: Refer to ptr_eq() Mathieu Desnoyers
2026-10-09 18:21 ` [PATCH hazptr v2 4/4] hazptr: Introduce "try acquire" fast path, fallback to overflow list Mathieu Desnoyers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM0N5L0LG9P0.6IFXMJX60P92@garyguo.net \
--to=gary@garyguo.net \
--cc=bigeasy@linutronix.de \
--cc=boqun.feng@gmail.com \
--cc=frederic@kernel.org \
--cc=github@npopov.com \
--cc=gregkh@linuxfoundation.org \
--cc=jiangshanlai@gmail.com \
--cc=joel@joelfernandes.org \
--cc=josh@joshtriplett.org \
--cc=jstultz@google.com \
--cc=kunwu.chan@gmail.com \
--cc=lianux.mm@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lkmm@lists.linux.dev \
--cc=llvm@lists.linux.dev \
--cc=longman@redhat.com \
--cc=maged.michael@gmail.com \
--cc=mark.rutland@arm.com \
--cc=mathieu.desnoyers@efficios.com \
--cc=mingo@redhat.com \
--cc=mjguzik@gmail.com \
--cc=paulmck@kernel.org \
--cc=peterz@infradead.org \
--cc=qiang.zhang1211@gmail.com \
--cc=rcu@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=stern@rowland.harvard.edu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=urezki@gmail.com \
--cc=vbabka@suse.cz \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®