RE: [PATCH v3 00/10] Introduced new Cadence USBSSP DRD Driver.

[Pawel Laszczak <pawell@cadence.com>]

Sekhar,

>
>
>On 24/11/20 2:51 PM, Pawel Laszczak wrote:
>> Peter,
>>
>>> On 20-11-19 15:12:57, Pawel Laszczak wrote:
>>>> This patch introduce new Cadence USBSS DRD driver to linux kernel.
>>>>
>>>> The Cadence USBSS DRD Controller is a highly configurable IP Core which
>>>> can be instantiated as Dual-Role Device (DRD), Peripheral Only and
>>>> Host Only (XHCI)configurations.
>>>>
>>>> The current driver has been validated with FPGA burned. We have support
>>>> for PCIe bus, which is used on FPGA prototyping.
>>>>
>>>> The host side of USBSS-DRD controller is compliance with XHCI
>>>> specification, so it works with standard XHCI Linux driver.
>>>>
>>>> The device side of USBSS DRD controller is compliant with XHCI.
>>>> The architecture for device side is almost the same as for host side,
>>>> and most of the XHCI specification can be used to understand how
>>>> this controller operates.
>>>>
>>>> This controller and driver support Full Speed, Hight Speed, Supper Speed
>>>> and Supper Speed Plus USB protocol.
>>>>
>>>> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver.
>>>> The last letter of this acronym means PLUS. The formal name of controller
>>>> is USBSSP but it's to generic so I've decided to use CDNSP.
>>>>
>>>> The patch 1: adds support for DRD CDNSP.
>>>> The patch 2: separates common code that can be reusable by cdnsp driver.
>>>> The patch 3: moves reusable code to separate module.
>>>> The patch 4: changes prefixes in reusable code from cdns3 to common cdns.
>>>> The patch 5: adopts gadget_dev pointer in cdns structure to make possible
>>>>              use it in both drivers.
>>>> The patches 6-8: add the main part of driver and has been intentionally
>>>>              split into 3 part. In my opinion such division should not
>>>>              affect understanding and reviewing the driver, and cause that
>>>>              main patch (7/8) is little smaller. Patch 6 introduces main
>>>>              header file for driver, 7 is the main part that implements all
>>>>              functionality of driver and 8 introduces tracepoints.
>>>> The patch 9: Adds cdns3 prefixes to files related with USBSS driver.
>>>> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file.
>>>>
>>>> Changlog from v2:
>>>> - removed not used pdev parameter from cdnsp_read/wite_64 functions
>>>> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31)
>>>> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro
>>>> - replaced 'true' with '1' in bits description in cdnsp-gadget.h file
>>>> - fixed some typos
>>>> - some other less important changes suggested by Peter Chen
>>>
>>> Hi Pawel,
>>>
>>> I have updated my -next tree as the latest usb-next tree which v5.10-rc4
>>> is included, would you please rebase my tree and send again, I could apply your
>>> patches and test, if test could pass, I will apply it to my -next tree.
>>> You don't need to rebase again since it is a huge patch set, will take some
>>> efforts for rebase.
>>>
>>
>> I'll try to post it tomorrow.
>
>Pawel, have you tested TI J7 for regressions after this series? After
>your latest changes, can you post a tree which someone in TI can test?

No I haven't test it on J7.  For testing I'm using PCIe based platform for
both cnds3 and cdnsp driver. 

Why you can't use the latest kernel version and current series ? 

--

Thanks
Pawel