From: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
To: Anvesh Salveru <anvesh.s@samsung.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "jingoohan1@gmail.com" <jingoohan1@gmail.com>,
"gustavo.pimentel@synopsys.com" <Gustavo.Pimentel@synopsys.com>,
"pankaj.dubey@samsung.com" <pankaj.dubey@samsung.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"andrew.murray@arm.com" <andrew.murray@arm.com>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"kishon@ti.com" <kishon@ti.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>
Subject: RE: [PATCH v3 0/2] Add support to handle ZRX-DC Compliant PHYs
Date: Wed, 20 Nov 2019 15:11:03 +0000 [thread overview]
Message-ID: <DM6PR12MB40104F3F6D5ACE478F0ACEB3DA4F0@DM6PR12MB4010.namprd12.prod.outlook.com> (raw)
In-Reply-To: <1574256371-617-1-git-send-email-anvesh.s@samsung.com>
Hi,
You missed to sending this patch series to linux-pci@vger.kernel.org.
Regards,
Gustavo
On Wed, Nov 20, 2019 at 13:26:9, Anvesh Salveru <anvesh.s@samsung.com>
wrote:
> According the PCI Express base specification when PHY does not meet
> ZRX-DC specification, after every 100ms timeout the link should
> transition to recovery state when the link is in low power states.
>
> Ports that meet the ZRX-DC specification for 2.5 GT/s while in the
> L1.Idle state and are therefore not required to implement the 100 ms
> timeout and transition to Recovery should avoid implementing it, since
> it will reduce the power savings expected from the L1 state.
>
> DesignWare controller provides GEN3_ZRXDC_NONCOMPL field in
> GEN3_RELATED_OFF to specify about ZRX-DC compliant PHY.
>
> We need to get the PHY property in controller driver. So, we are
> proposing a new method phy_property_present() in the phy driver.
>
> Platform specific phy drivers should implement the callback for
> property_present which will return true if the property exists in
> the PHY.
>
> static bool xxxx_phy_property_present(struct phy *phy, const char *property)
> {
> struct device *dev = &phy->dev;
>
> return of_property_read_bool(dev->of_node, property);
> }
>
> And controller platform driver should populate the phy_zrxdc_compliant
> flag, which will be used by generic DesignWare driver.
>
> pci->phy_zrxdc_compliant = phy_property_present(xxxx_ctrl->phy, "phy-zrxdc-compliant");
>
> Anvesh Salveru (2):
> phy: core: add phy_property_present method
> PCI: dwc: add support to handle ZRX-DC Compliant PHYs
>
> drivers/pci/controller/dwc/pcie-designware.c | 6 ++++++
> drivers/pci/controller/dwc/pcie-designware.h | 4 ++++
> drivers/phy/phy-core.c | 26 ++++++++++++++++++++++++++
> include/linux/phy/phy.h | 8 ++++++++
> 4 files changed, 44 insertions(+)
>
> --
> 2.7.4
prev parent reply other threads:[~2019-11-20 15:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20191120132645epcas5p29da16b1881e3da52fac0516a32e277d5@epcas5p2.samsung.com>
2019-11-20 13:26 ` Anvesh Salveru
[not found] ` <CGME20191120132650epcas5p11fc132ba7084db7b7ad1b6c22b357770@epcas5p1.samsung.com>
2019-11-20 13:26 ` [PATCH v3 1/2] phy: core: add phy_property_present method Anvesh Salveru
[not found] ` <CGME20191120132657epcas5p418542be130de4e02901825eeac7edcdb@epcas5p4.samsung.com>
2019-11-20 13:26 ` [PATCH v3 2/2] PCI: dwc: add support to handle ZRX-DC Compliant PHYs Anvesh Salveru
2019-11-20 15:11 ` Gustavo Pimentel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR12MB40104F3F6D5ACE478F0ACEB3DA4F0@DM6PR12MB4010.namprd12.prod.outlook.com \
--to=gustavo.pimentel@synopsys.com \
--cc=andrew.murray@arm.com \
--cc=anvesh.s@samsung.com \
--cc=bhelgaas@google.com \
--cc=jingoohan1@gmail.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®