Re: [PATCH 18/19] usb: isp1760: wait for the TT clear in endpoint_disable

[Rui Miguel Silva <rui.silva@linaro.org>]

Hi,,

On Tue Oct 27, 2026 at 2:57 PM WET, Greg Kroah-Hartman wrote:

> From: Josef Bacik <josef@toxicpanda.com>
>
> The driver sets qh->tt_buffer_dirty and calls usb_hub_clear_tt_buffer()
> when a transfer to a full or low speed device fails or is unlinked while
> it is running. The hub driver stores urb->ep in its list and
> hub_tt_work() hands it back to isp1760_clear_tt_buffer_complete() after
> the CLEAR_TT_BUFFER request to the hub.
>
> Nothing keeps the endpoint until then. isp1760_endpoint_disable() frees
> the QH at once. If the device is unplugged, the unlink of a running URB
> queues such a request, and usb_disconnect() goes on to free the
> usb_device and its configurations, which hold the struct
> usb_host_endpoint. The callback then reads ep->hcpriv from freed memory
> and, if it is not NULL, writes to whatever it points to. A change of the
> configuration or altsetting only frees the QH, under a callback which
> has loaded ep->hcpriv without the lock.
>
> The HCD has to wait, like ehci_endpoint_disable(),
> xhci_endpoint_disable() and fotg210_endpoint_disable() do. hub_tt_work()
> calls the callback for every entry, also if the request failed, and
> hub_quiesce() flushes the work, so the wait ends.
>
> Fixes: 74ad60292bf0 ("usb/isp1760: Clear TT buffer on interrupted low & full speed transfers")
> Cc: stable <stable@kernel.org>
> Cc: Rui Miguel Silva <rui.silva@linaro.org>
> Signed-off-by: Josef Bacik <josef@toxicpanda.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Yup, LGTM, thanks.

Acked-by: Rui Miguel Silva <rui.silva@linaro.org>

Cheers,
   Rui
> ---
>  drivers/usb/isp1760/isp1760-hcd.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
> index 6c52c6f59d69..3cbf5fe3ed34 100644
> --- a/drivers/usb/isp1760/isp1760-hcd.c
> +++ b/drivers/usb/isp1760/isp1760-hcd.c
> @@ -2071,12 +2071,23 @@ static void isp1760_endpoint_disable(struct usb_hcd *hcd,
>  	struct isp1760_qh *qh, *qh_iter;
>  	int i;
>  
> +rescan:
>  	spin_lock_irqsave(&priv->lock, spinflags);
>  
>  	qh = ep->hcpriv;
>  	if (!qh)
>  		goto out;
>  
> +	/*
> +	 * The hub driver still has a pointer to the endpoint. Wait until it
> +	 * has called isp1760_clear_tt_buffer_complete().
> +	 */
> +	if (qh->tt_buffer_dirty) {
> +		spin_unlock_irqrestore(&priv->lock, spinflags);
> +		schedule_timeout_uninterruptible(1);
> +		goto rescan;
> +	}
> +
>  	WARN_ON(!list_empty(&qh->qtd_list));
>  
>  	for (i = 0; i < QH_END; i++)
>
> -- 
> 2.56.0