From: Al Viro <viro@ftp.linux.org.uk>
To: torvalds@osdl.org
Cc: linux-kernel@vger.kernel.org, linux-m68k@vger.kernel.org
Subject: [PATCH 35/41] m68k: Moved initialisation of conswitchp from subarches to global arch setup
Date: Tue, 03 Jan 2006 23:29:20 +0000 [thread overview]
Message-ID: <E1Etvai-0003PJ-PJ@ZenIV.linux.org.uk> (raw)
From: Kars de Jong <jongk@linux-m68k.org>
Date: 1135272955 -0500
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/m68k/amiga/config.c | 3 ---
arch/m68k/apollo/config.c | 3 ---
arch/m68k/atari/config.c | 3 ---
arch/m68k/hp300/config.c | 3 ---
arch/m68k/kernel/setup.c | 4 ++++
arch/m68k/mac/config.c | 3 ---
arch/m68k/q40/config.c | 3 ---
arch/m68k/sun3/config.c | 3 ---
arch/m68k/sun3x/config.c | 4 ----
9 files changed, 4 insertions(+), 25 deletions(-)
31f02d1f0abb0a189090968d7ae398d3a2066b71
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index da24476..8eadde9 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -431,9 +431,6 @@ void __init config_amiga(void)
mach_floppy_setup = amiga_floppy_setup;
#endif
mach_reset = amiga_reset;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = amiga_mksound;
#endif
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 2649294..d401962 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -176,9 +176,6 @@ void config_apollo(void) {
mach_set_clock_mmss = dn_dummy_set_clock_mmss; /* */
mach_process_int = dn_process_int;
mach_reset = dn_dummy_reset; /* */
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = dn_heartbeat;
#endif
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 9261d2d..f6d266b 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -247,9 +247,6 @@ void __init config_atari(void)
#ifdef CONFIG_ATARI_FLOPPY
mach_floppy_setup = atari_floppy_setup;
#endif
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
mach_max_dma_address = 0xffffff;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = atari_mksound;
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index a0b854f..6d129ee 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -261,9 +261,6 @@ void __init config_hp300(void)
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = hp300_pulse;
#endif
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
mach_max_dma_address = 0xffffffff;
if (hp300_model >= HP_330 && hp300_model <= HP_433S && hp300_model != HP_350) {
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index c4d4d05..583526f 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -282,6 +282,10 @@ void __init setup_arch(char **cmdline_p)
}
}
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
switch (m68k_machtype) {
#ifdef CONFIG_AMIGA
case MACH_AMIGA:
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index cd19cbb..14f8d3f 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -212,9 +212,6 @@ void __init config_mac(void)
mach_reset = mac_reset;
mach_halt = mac_poweroff;
mach_power_off = mac_poweroff;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
mach_max_dma_address = 0xffffffff;
#if 0
mach_debug_init = mac_debug_init;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 02b626b..67e88a4 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -194,9 +194,6 @@ void __init config_q40(void)
mach_heartbeat = q40_heartbeat;
#endif
mach_halt = q40_halt;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
/* disable a few things that SMSQ might have left enabled */
q40_disable_irqs();
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 77d05bc..f1ca0df 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -160,9 +160,6 @@ void __init config_sun3(void)
mach_hwclk = sun3_hwclk;
mach_halt = sun3_halt;
mach_get_hardware_list = sun3_get_hardware_list;
-#if defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
memory_start = ((((int)&_end) + 0x2000) & ~0x1fff);
// PROM seems to want the last couple of physical pages. --m
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index 0ef547f..0920f5d 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -71,10 +71,6 @@ void __init config_sun3x(void)
mach_get_model = sun3_get_model;
mach_get_hardware_list = sun3x_get_hardware_list;
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
-
sun3_intreg = (unsigned char *)SUN3X_INTREG;
/* only the serial console is known to work anyway... */
--
0.99.9.GIT
reply other threads:[~2006-01-03 23:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1Etvai-0003PJ-PJ@ZenIV.linux.org.uk \
--to=viro@ftp.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®