From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757221Ab0EaTta (ORCPT ); Mon, 31 May 2010 15:49:30 -0400 Received: from relay3.sgi.com ([192.48.152.1]:49184 "EHLO relay.sgi.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756958Ab0EaTt2 (ORCPT ); Mon, 31 May 2010 15:49:28 -0400 To: linux-kernel@vger.kernel.org Subject: [PATCH V3] x86, UV: BAU performance and error recovery Cc: mingo@elte.hu, hpa@zytor.com, gregkh@suse.de Message-Id: From: Cliff Wickman Date: Mon, 31 May 2010 14:49:42 -0500 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Ingo, This patch updates the patch of the same name, which is in your lastest -tip b8f7fb1: x86, UV: Improve BAU performance and error recovery It does not depend on any other patch. It includes the BAU tunables interfaced through debugfs (instead of /proc) per Greg Kroah-Hartman's recommendation. This patch - corrects several bugs: o the lack of BAU messaging to blade 0 (an uninitialized field) o correct message type for a normal shootdown message o fix to recovery from timed-out s/w acknowledge resources o calculation of the actual destination timeout so that a 'short' timeout can be identified o fix mishandling of non-consecutive hub and socket numbers o identification of a cpu's socket number o removal of the check for the h/w stay-busy bug, as under extreme pressure it cannot be accurately detected o fall back to IPI-method when extreme pressure makes numalink very slow, and then resume BAU-method after an interval - adds BAU broadcasting to the cpu's on the local node - simplifies the returning of the original cpu bitmap when the BAU attempt is given up entirely - adds modification of tuning variables through debugfs (/sys/kernel/debug/sgi_uv/bau_tunables) Peter, I weighed the review-ability of a patch for each bug fix and each addition, versus the ease of tracking a single patch. And decided on the latter since these bugs and features are only of interest to SGI UV. Hope that is reasonable. Diffed against 2.6.34 -tip (Sheep on Meth) Signed-off-by: Cliff Wickman --- arch/x86/include/asm/uv/uv_bau.h | 306 +++++-- arch/x86/kernel/tlb_uv.c | 1586 +++++++++++++++++++++++++++++---------- 2 files changed, 1422 insertions(+), 470 deletions(-) Index: 100524.linux.2.6.34/arch/x86/include/asm/uv/uv_bau.h =================================================================== --- 100524.linux.2.6.34.orig/arch/x86/include/asm/uv/uv_bau.h +++ 100524.linux.2.6.34/arch/x86/include/asm/uv/uv_bau.h @@ -27,13 +27,15 @@ * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on. * * We will use 31 sets, one for sending BAU messages from each of the 32 - * cpu's on the node. + * cpu's on the uvhub. * * TLB shootdown will use the first of the 8 descriptors of each set. * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set). */ #define UV_ITEMS_PER_DESCRIPTOR 8 +/* the 'throttle' to prevent the hardware stay-busy bug */ +#define MAX_BAU_CONCURRENT 3 #define UV_CPUS_PER_ACT_STATUS 32 #define UV_ACT_STATUS_MASK 0x3 #define UV_ACT_STATUS_SIZE 2 @@ -44,7 +46,26 @@ #define UV_DESC_BASE_PNODE_SHIFT 49 #define UV_PAYLOADQ_PNODE_SHIFT 49 #define UV_PTC_BASENAME "sgi_uv/ptc_statistics" +#define UV_BAU_BASENAME "sgi_uv/bau_tunables" +#define UV_BAU_TUNABLES_DIR "sgi_uv" +#define UV_BAU_TUNABLES_FILE "bau_tunables" +#define WHITESPACE " \t\n" #define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) +#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x0000000009UL +/* [19:16] SOFT_ACK timeout period 19: 1 is urgency 7 17:16 1 is multiplier */ +#define BAU_MISC_CONTROL_MULT_MASK 3 + +#define UVH_AGING_PRESCALE_SEL 0x000000b000UL +/* [30:28] URGENCY_7 an index into a table of times */ +#define BAU_URGENCY_7_SHIFT 28 +#define BAU_URGENCY_7_MASK 7 + +#define UVH_TRANSACTION_TIMEOUT 0x000000b200UL +/* [45:40] BAU - BAU transaction timeout select - a multiplier */ +#define BAU_TRANS_SHIFT 40 +#define BAU_TRANS_MASK 0x3f /* * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 @@ -55,15 +76,26 @@ #define DESC_STATUS_SOURCE_TIMEOUT 3 /* - * source side thresholds at which message retries print a warning + * delay for 'plugged' timeout retries, in microseconds */ -#define SOURCE_TIMEOUT_LIMIT 20 -#define DESTINATION_TIMEOUT_LIMIT 20 +#define PLUGGED_DELAY 10 + +/* + * threshholds at which to use IPI to free resources + */ +/* after this # consecutive 'plugged' timeouts, use IPI to release resources */ +#define PLUGSB4RESET 100 +/* after this many consecutive timeouts, use IPI to release resources */ +#define TIMEOUTSB4RESET 1 +/* at this number uses of IPI to release resources, giveup the request */ +#define IPI_RESET_LIMIT 1 +/* after this # consecutive successes, bump up the throttle if it was lowered */ +#define COMPLETE_THRESHOLD 5 /* * number of entries in the destination side payload queue */ -#define DEST_Q_SIZE 17 +#define DEST_Q_SIZE 20 /* * number of destination side software ack resources */ @@ -72,9 +104,17 @@ /* * completion statuses for sending a TLB flush message */ -#define FLUSH_RETRY 1 -#define FLUSH_GIVEUP 2 -#define FLUSH_COMPLETE 3 +#define FLUSH_RETRY_PLUGGED 1 +#define FLUSH_RETRY_TIMEOUT 2 +#define FLUSH_GIVEUP 3 +#define FLUSH_COMPLETE 4 + +/* + * tuning the action when the numalink network is extremely delayed + */ +#define CONGESTED_RESPONSE_US 1000 /* 'long' response time, in microseconds */ +#define CONGESTED_REPS 10 /* long delays averaged over this many broadcasts */ +#define CONGESTED_PERIOD 30 /* time for the bau to be disabled, in seconds */ /* * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor) @@ -86,14 +126,14 @@ * 'base_dest_nodeid' field of the header corresponds to the * destination nodeID associated with that specified bit. */ -struct bau_target_nodemask { - unsigned long bits[BITS_TO_LONGS(256)]; +struct bau_target_uvhubmask { + unsigned long bits[BITS_TO_LONGS(UV_DISTRIBUTION_SIZE)]; }; /* - * mask of cpu's on a node + * mask of cpu's on a uvhub * (during initialization we need to check that unsigned long has - * enough bits for max. cpu's per node) + * enough bits for max. cpu's per uvhub) */ struct bau_local_cpumask { unsigned long bits; @@ -135,8 +175,8 @@ struct bau_msg_payload { struct bau_msg_header { unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ /* bits 5:0 */ - unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */ - /* bits 20:6 */ /* first bit in node_map */ + unsigned int base_dest_nodeid:15; /* nasid (pnode<<1) of */ + /* bits 20:6 */ /* first bit in uvhub map */ unsigned int command:8; /* message type */ /* bits 28:21 */ /* 0x38: SN3net EndPoint Message */ @@ -146,26 +186,38 @@ struct bau_msg_header { unsigned int rsvd_2:9; /* must be zero */ /* bits 40:32 */ /* Suppl_A is 56-41 */ - unsigned int payload_2a:8;/* becomes byte 16 of msg */ - /* bits 48:41 */ /* not currently using */ - unsigned int payload_2b:8;/* becomes byte 17 of msg */ - /* bits 56:49 */ /* not currently using */ + unsigned int sequence:16;/* message sequence number */ + /* bits 56:41 */ /* becomes bytes 16-17 of msg */ /* Address field (96:57) is never used as an address (these are address bits 42:3) */ + unsigned int rsvd_3:1; /* must be zero */ /* bit 57 */ /* address bits 27:4 are payload */ - /* these 24 bits become bytes 12-14 of msg */ + /* these next 24 (58-81) bits become bytes 12-14 of msg */ + + /* bits 65:58 land in byte 12 */ unsigned int replied_to:1;/* sent as 0 by the source to byte 12 */ /* bit 58 */ - - unsigned int payload_1a:5;/* not currently used */ - /* bits 63:59 */ - unsigned int payload_1b:8;/* not currently used */ - /* bits 71:64 */ - unsigned int payload_1c:8;/* not currently used */ - /* bits 79:72 */ - unsigned int payload_1d:2;/* not currently used */ + unsigned int msg_type:3; /* software type of the message*/ + /* bits 61:59 */ + unsigned int canceled:1; /* message canceled, resource to be freed*/ + /* bit 62 */ + unsigned int payload_1a:1;/* not currently used */ + /* bit 63 */ + unsigned int payload_1b:2;/* not currently used */ + /* bits 65:64 */ + + /* bits 73:66 land in byte 13 */ + unsigned int payload_1ca:6;/* not currently used */ + /* bits 71:66 */ + unsigned int payload_1c:2;/* not currently used */ + /* bits 73:72 */ + + /* bits 81:74 land in byte 14 */ + unsigned int payload_1d:6;/* not currently used */ + /* bits 79:74 */ + unsigned int payload_1e:2;/* not currently used */ /* bits 81:80 */ unsigned int rsvd_4:7; /* must be zero */ @@ -178,7 +230,7 @@ struct bau_msg_header { /* bits 95:90 */ unsigned int rsvd_6:5; /* must be zero */ /* bits 100:96 */ - unsigned int int_both:1;/* if 1, interrupt both sockets on the blade */ + unsigned int int_both:1;/* if 1, interrupt both sockets on the uvhub */ /* bit 101*/ unsigned int fairness:3;/* usually zero */ /* bits 104:102 */ @@ -191,13 +243,18 @@ struct bau_msg_header { /* bits 127:107 */ }; +/* see msg_type: */ +#define MSG_NOOP 0 +#define MSG_REGULAR 1 +#define MSG_RETRY 2 + /* * The activation descriptor: * The format of the message to send, plus all accompanying control * Should be 64 bytes */ struct bau_desc { - struct bau_target_nodemask distribution; + struct bau_target_uvhubmask distribution; /* * message template, consisting of header and payload: */ @@ -237,19 +294,25 @@ struct bau_payload_queue_entry { unsigned short acknowledge_count; /* filled in by destination */ /* 16 bits, bytes 10-11 */ - unsigned short replied_to:1; /* sent as 0 by the source */ - /* 1 bit */ - unsigned short unused1:7; /* not currently using */ - /* 7 bits: byte 12) */ - - unsigned char unused2[2]; /* not currently using */ - /* bytes 13-14 */ + /* these next 3 bytes come from bits 58-81 of the message header */ + unsigned short replied_to:1; /* sent as 0 by the source */ + unsigned short msg_type:3; /* software message type */ + unsigned short canceled:1; /* sent as 0 by the source */ + unsigned short unused1:3; /* not currently using */ + /* byte 12 */ + + unsigned char unused2a; /* not currently using */ + /* byte 13 */ + unsigned char unused2; /* not currently using */ + /* byte 14 */ unsigned char sw_ack_vector; /* filled in by the hardware */ /* byte 15 (bits 127:120) */ - unsigned char unused4[3]; /* not currently using bytes 17-19 */ - /* bytes 17-19 */ + unsigned short sequence; /* message sequence number */ + /* bytes 16-17 */ + unsigned char unused4[2]; /* not currently using bytes 18-19 */ + /* bytes 18-19 */ int number_of_cpus; /* filled in at destination */ /* 32 bits, bytes 20-23 (aligned) */ @@ -258,64 +321,126 @@ struct bau_payload_queue_entry { /* bytes 24-31 */ }; -/* - * one for every slot in the destination payload queue - */ -struct bau_msg_status { - struct bau_local_cpumask seen_by; /* map of cpu's */ +struct msg_desc { + struct bau_payload_queue_entry *msg; + int msg_slot; + int sw_ack_slot; + struct bau_payload_queue_entry *va_queue_first; + struct bau_payload_queue_entry *va_queue_last; +}; + +struct reset_args { + int sender; }; /* - * one for every slot in the destination software ack resources + * This structure is allocated per_cpu for UV TLB shootdown statistics. */ -struct bau_sw_ack_status { - struct bau_payload_queue_entry *msg; /* associated message */ - int watcher; /* cpu monitoring, or -1 */ +struct ptc_stats { + /* sender statistics */ + unsigned long s_giveup; /* number of fall backs to IPI-style flushes */ + unsigned long s_requestor; /* number of shootdown requests */ + unsigned long s_stimeout; /* source side timeouts */ + unsigned long s_dtimeout; /* destination side timeouts */ + unsigned long s_time; /* time spent in sending side */ + unsigned long s_retriesok; /* successful retries */ + unsigned long s_ntargcpu; /* total number of cpu's targeted */ + unsigned long s_ntargself; /* times the sending cpu was targeted */ + unsigned long s_ntarglocals; /* targets of cpus on the local blade */ + unsigned long s_ntargremotes; /* targets of cpus on remote blades */ + unsigned long s_ntarglocaluvhub; /* targets of the local hub */ + unsigned long s_ntargremoteuvhub; /* remotes hubs targeted */ + unsigned long s_ntarguvhub; /* total number of uvhubs targeted */ + unsigned long s_ntarguvhub16; /* number of times target hubs >= 16*/ + unsigned long s_ntarguvhub8; /* number of times target hubs >= 8 */ + unsigned long s_ntarguvhub4; /* number of times target hubs >= 4 */ + unsigned long s_ntarguvhub2; /* number of times target hubs >= 2 */ + unsigned long s_ntarguvhub1; /* number of times target hubs == 1 */ + unsigned long s_resets_plug; /* ipi-style resets from plug state */ + unsigned long s_resets_timeout; /* ipi-style resets from timeouts */ + unsigned long s_busy; /* status stayed busy past s/w timer */ + unsigned long s_throttles; /* waits in throttle */ + unsigned long s_retry_messages; /* retry broadcasts */ + unsigned long s_bau_reenabled; /* for bau enable/disable */ + unsigned long s_bau_disabled; /* for bau enable/disable */ + /* destination statistics */ + unsigned long d_alltlb; /* times all tlb's on this cpu were flushed */ + unsigned long d_onetlb; /* times just one tlb on this cpu was flushed */ + unsigned long d_multmsg; /* interrupts with multiple messages */ + unsigned long d_nomsg; /* interrupts with no message */ + unsigned long d_time; /* time spent on destination side */ + unsigned long d_requestee; /* number of messages processed */ + unsigned long d_retries; /* number of retry messages processed */ + unsigned long d_canceled; /* number of messages canceled by retries */ + unsigned long d_nocanceled; /* retries that found nothing to cancel */ + unsigned long d_resets; /* number of ipi-style requests processed */ + unsigned long d_rcanceled; /* number of messages canceled by resets */ }; /* - * one on every node and per-cpu; to locate the software tables + * one per-cpu; to locate the software tables */ struct bau_control { struct bau_desc *descriptor_base; - struct bau_payload_queue_entry *bau_msg_head; struct bau_payload_queue_entry *va_queue_first; struct bau_payload_queue_entry *va_queue_last; - struct bau_msg_status *msg_statuses; - int *watching; /* pointer to array */ -}; - -/* - * This structure is allocated per_cpu for UV TLB shootdown statistics. - */ -struct ptc_stats { - unsigned long ptc_i; /* number of IPI-style flushes */ - unsigned long requestor; /* number of nodes this cpu sent to */ - unsigned long requestee; /* times cpu was remotely requested */ - unsigned long alltlb; /* times all tlb's on this cpu were flushed */ - unsigned long onetlb; /* times just one tlb on this cpu was flushed */ - unsigned long s_retry; /* retries on source side timeouts */ - unsigned long d_retry; /* retries on destination side timeouts */ - unsigned long sflush; /* cycles spent in uv_flush_tlb_others */ - unsigned long dflush; /* cycles spent on destination side */ - unsigned long retriesok; /* successes on retries */ - unsigned long nomsg; /* interrupts with no message */ - unsigned long multmsg; /* interrupts with multiple messages */ - unsigned long ntargeted;/* nodes targeted */ + struct bau_payload_queue_entry *bau_msg_head; + struct bau_control *uvhub_master; + struct bau_control *socket_master; + struct ptc_stats *statp; + unsigned long timeout_interval; + unsigned long set_bau_on_time; + atomic_t active_descriptor_count; + int plugged_tries; + int timeout_tries; + int ipi_attempts; + int conseccompletes; + int baudisabled; + int set_bau_off; + short cpu; + short uvhub_cpu; + short uvhub; + short cpus_in_socket; + short cpus_in_uvhub; + unsigned short message_number; + unsigned short uvhub_quiesce; + short socket_acknowledge_count[DEST_Q_SIZE]; + cycles_t send_message; + spinlock_t uvhub_lock; + spinlock_t queue_lock; + /* tunables */ + int max_bau_concurrent; + int max_bau_concurrent_constant; + int plugged_delay; + int plugsb4reset; + int timeoutsb4reset; + int ipi_reset_limit; + int complete_threshold; + int congested_response_us; + int congested_reps; + int congested_period; + cycles_t period_time; + long period_requests; }; -static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp) +static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp) { - return constant_test_bit(node, &dstp->bits[0]); + return constant_test_bit(uvhub, &dstp->bits[0]); } -static inline void bau_node_set(int node, struct bau_target_nodemask *dstp) +static inline void bau_uvhub_set(int uvhub, struct bau_target_uvhubmask *dstp) { - __set_bit(node, &dstp->bits[0]); + __set_bit(uvhub, &dstp->bits[0]); } -static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits) +static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp, + int nbits) { bitmap_zero(&dstp->bits[0], nbits); } +static inline int bau_uvhub_weight(struct bau_target_uvhubmask *dstp) +{ + return bitmap_weight((unsigned long *)&dstp->bits[0], + UV_DISTRIBUTION_SIZE); +} static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits) { @@ -328,4 +453,35 @@ static inline void bau_cpubits_clear(str extern void uv_bau_message_intr1(void); extern void uv_bau_timeout_intr1(void); +struct atomic_short { + short counter; +}; + +/** + * atomic_read_short - read a short atomic variable + * @v: pointer of type atomic_short + * + * Atomically reads the value of @v. + */ +static inline int atomic_read_short(const struct atomic_short *v) +{ + return v->counter; +} + +/** + * atomic_add_short_return - add and return a short int + * @i: short value to add + * @v: pointer of type atomic_short + * + * Atomically adds @i to @v and returns @i + @v + */ +static inline int atomic_add_short_return(short i, struct atomic_short *v) +{ + short __i = i; + asm volatile(LOCK_PREFIX "xaddw %0, %1" + : "+r" (i), "+m" (v->counter) + : : "memory"); + return i + __i; +} + #endif /* _ASM_X86_UV_UV_BAU_H */ Index: 100524.linux.2.6.34/arch/x86/kernel/tlb_uv.c =================================================================== --- 100524.linux.2.6.34.orig/arch/x86/kernel/tlb_uv.c +++ 100524.linux.2.6.34/arch/x86/kernel/tlb_uv.c @@ -1,15 +1,15 @@ /* * SGI UltraViolet TLB flush routines. * - * (c) 2008 Cliff Wickman , SGI. + * (c) 2008-2010 Cliff Wickman , SGI. * * This code is released under the GNU General Public License version 2 or * later. */ #include #include +#include #include -#include #include #include @@ -20,42 +20,81 @@ #include #include #include +#include -static struct bau_control **uv_bau_table_bases __read_mostly; -static int uv_bau_retry_limit __read_mostly; +/* timeouts in nanoseconds (indexed by UVH_AGING_PRESCALE_SEL urgency7 30:28) */ +static int timeout_base_ns[] = { + 20, + 160, + 1280, + 10240, + 81920, + 655360, + 5242880, + 167772160 +}; +static int timeout_us; +static int nobau; +static int baudisabled; +static spinlock_t disable_lock; +static cycles_t congested_cycles; + +/* tunables: */ +static int max_bau_concurrent = MAX_BAU_CONCURRENT; +static int max_bau_concurrent_constant = MAX_BAU_CONCURRENT; +static int plugged_delay = PLUGGED_DELAY; +static int plugsb4reset = PLUGSB4RESET; +static int timeoutsb4reset = TIMEOUTSB4RESET; +static int ipi_reset_limit = IPI_RESET_LIMIT; +static int complete_threshold = COMPLETE_THRESHOLD; +static int congested_response_us = CONGESTED_RESPONSE_US; +static int congested_reps = CONGESTED_REPS; +static int congested_period = CONGESTED_PERIOD; +static struct dentry *tunables_dir; +static struct dentry *tunables_file; -/* base pnode in this partition */ -static int uv_partition_base_pnode __read_mostly; +static int __init setup_nobau(char *arg) +{ + nobau = 1; + return 0; +} +early_param("nobau", setup_nobau); -static unsigned long uv_mmask __read_mostly; +/* base pnode in this partition */ +static int uv_partition_base_pnode __read_mostly; +/* position of pnode (which is nasid>>1): */ +static int uv_nshift __read_mostly; +static unsigned long uv_mmask __read_mostly; static DEFINE_PER_CPU(struct ptc_stats, ptcstats); static DEFINE_PER_CPU(struct bau_control, bau_control); +static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask); /* - * Determine the first node on a blade. + * Determine the first node on a uvhub. 'Nodes' are used for kernel + * memory allocation. */ -static int __init blade_to_first_node(int blade) +static int __init uvhub_to_first_node(int uvhub) { int node, b; for_each_online_node(node) { b = uv_node_to_blade_id(node); - if (blade == b) + if (uvhub == b) return node; } - return -1; /* shouldn't happen */ + return -1; } /* - * Determine the apicid of the first cpu on a blade. + * Determine the apicid of the first cpu on a uvhub. */ -static int __init blade_to_first_apicid(int blade) +static int __init uvhub_to_first_apicid(int uvhub) { int cpu; for_each_present_cpu(cpu) - if (blade == uv_cpu_to_blade_id(cpu)) + if (uvhub == uv_cpu_to_blade_id(cpu)) return per_cpu(x86_cpu_to_apicid, cpu); return -1; } @@ -68,195 +107,432 @@ static int __init blade_to_first_apicid( * clear of the Timeout bit (as well) will free the resource. No reply will * be sent (the hardware will only do one reply per message). */ -static void uv_reply_to_message(int resource, - struct bau_payload_queue_entry *msg, - struct bau_msg_status *msp) +static inline void uv_reply_to_message(struct msg_desc *mdp, + struct bau_control *bcp) { unsigned long dw; + struct bau_payload_queue_entry *msg; - dw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource); + msg = mdp->msg; + if (!msg->canceled) { + dw = (msg->sw_ack_vector << UV_SW_ACK_NPENDING) | + msg->sw_ack_vector; + uv_write_local_mmr( + UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw); + } msg->replied_to = 1; msg->sw_ack_vector = 0; - if (msp) - msp->seen_by.bits = 0; - uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw); } /* - * Do all the things a cpu should do for a TLB shootdown message. - * Other cpu's may come here at the same time for this message. + * Process the receipt of a RETRY message */ -static void uv_bau_process_message(struct bau_payload_queue_entry *msg, - int msg_slot, int sw_ack_slot) +static inline void uv_bau_process_retry_msg(struct msg_desc *mdp, + struct bau_control *bcp) { - unsigned long this_cpu_mask; - struct bau_msg_status *msp; - int cpu; + int i; + int cancel_count = 0; + int slot2; + unsigned long msg_res; + unsigned long mmr = 0; + struct bau_payload_queue_entry *msg; + struct bau_payload_queue_entry *msg2; + struct ptc_stats *stat; - msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; - cpu = uv_blade_processor_id(); - msg->number_of_cpus = - uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); - this_cpu_mask = 1UL << cpu; - if (msp->seen_by.bits & this_cpu_mask) - return; - atomic_or_long(&msp->seen_by.bits, this_cpu_mask); + msg = mdp->msg; + stat = bcp->statp; + stat->d_retries++; + /* + * cancel any message from msg+1 to the retry itself + */ + for (msg2 = msg+1, i = 0; i < DEST_Q_SIZE; msg2++, i++) { + if (msg2 > mdp->va_queue_last) + msg2 = mdp->va_queue_first; + if (msg2 == msg) + break; + + /* same conditions for cancellation as uv_do_reset */ + if ((msg2->replied_to == 0) && (msg2->canceled == 0) && + (msg2->sw_ack_vector) && ((msg2->sw_ack_vector & + msg->sw_ack_vector) == 0) && + (msg2->sending_cpu == msg->sending_cpu) && + (msg2->msg_type != MSG_NOOP)) { + slot2 = msg2 - mdp->va_queue_first; + mmr = uv_read_local_mmr + (UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE); + msg_res = msg2->sw_ack_vector; + /* + * This is a message retry; clear the resources held + * by the previous message only if they timed out. + * If it has not timed out we have an unexpected + * situation to report. + */ + if (mmr & (msg_res << UV_SW_ACK_NPENDING)) { + /* + * is the resource timed out? + * make everyone ignore the cancelled message. + */ + msg2->canceled = 1; + stat->d_canceled++; + cancel_count++; + uv_write_local_mmr( + UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, + (msg_res << UV_SW_ACK_NPENDING) | + msg_res); + } + } + } + if (!cancel_count) + stat->d_nocanceled++; +} - if (msg->replied_to == 1) - return; +/* + * Do all the things a cpu should do for a TLB shootdown message. + * Other cpu's may come here at the same time for this message. + */ +static void uv_bau_process_message(struct msg_desc *mdp, + struct bau_control *bcp) +{ + int msg_ack_count; + short socket_ack_count = 0; + struct ptc_stats *stat; + struct bau_payload_queue_entry *msg; + struct bau_control *smaster = bcp->socket_master; + /* + * This must be a normal message, or retry of a normal message + */ + msg = mdp->msg; + stat = bcp->statp; if (msg->address == TLB_FLUSH_ALL) { local_flush_tlb(); - __get_cpu_var(ptcstats).alltlb++; + stat->d_alltlb++; } else { __flush_tlb_one(msg->address); - __get_cpu_var(ptcstats).onetlb++; + stat->d_onetlb++; } + stat->d_requestee++; - __get_cpu_var(ptcstats).requestee++; + /* + * One cpu on each uvhub has the additional job on a RETRY + * of releasing the resource held by the message that is + * being retried. That message is identified by sending + * cpu number. + */ + if (msg->msg_type == MSG_RETRY && bcp == bcp->uvhub_master) + uv_bau_process_retry_msg(mdp, bcp); + + /* + * This is a sw_ack message, so we have to reply to it. + * Count each responding cpu on the socket. This avoids + * pinging the count's cache line back and forth between + * the sockets. + */ + socket_ack_count = atomic_add_short_return(1, (struct atomic_short *) + &smaster->socket_acknowledge_count[mdp->msg_slot]); + if (socket_ack_count == bcp->cpus_in_socket) { + /* + * Both sockets dump their completed count total into + * the message's count. + */ + smaster->socket_acknowledge_count[mdp->msg_slot] = 0; + msg_ack_count = atomic_add_short_return(socket_ack_count, + (struct atomic_short *)&msg->acknowledge_count); + + if (msg_ack_count == bcp->cpus_in_uvhub) { + /* + * All cpus in uvhub saw it; reply + */ + uv_reply_to_message(mdp, bcp); + } + } - atomic_inc_short(&msg->acknowledge_count); - if (msg->number_of_cpus == msg->acknowledge_count) - uv_reply_to_message(sw_ack_slot, msg, msp); + return; } /* - * Examine the payload queue on one distribution node to see - * which messages have not been seen, and which cpu(s) have not seen them. + * Determine the first cpu on a uvhub. + */ +static int uvhub_to_first_cpu(int uvhub) +{ + int cpu; + for_each_present_cpu(cpu) + if (uvhub == uv_cpu_to_blade_id(cpu)) + return cpu; + return -1; +} + +/* + * Last resort when we get a large number of destination timeouts is + * to clear resources held by a given cpu. + * Do this with IPI so that all messages in the BAU message queue + * can be identified by their nonzero sw_ack_vector field. * - * Returns the number of cpu's that have not responded. + * This is entered for a single cpu on the uvhub. + * The sender want's this uvhub to free a specific message's + * sw_ack resources. */ -static int uv_examine_destination(struct bau_control *bau_tablesp, int sender) +static void +uv_do_reset(void *ptr) { - struct bau_payload_queue_entry *msg; - struct bau_msg_status *msp; - int count = 0; int i; - int j; + int slot; + int count = 0; + unsigned long mmr; + unsigned long msg_res; + struct bau_control *bcp; + struct reset_args *rap; + struct bau_payload_queue_entry *msg; + struct ptc_stats *stat; - for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE; - msg++, i++) { - if ((msg->sending_cpu == sender) && (!msg->replied_to)) { - msp = bau_tablesp->msg_statuses + i; - printk(KERN_DEBUG - "blade %d: address:%#lx %d of %d, not cpu(s): ", - i, msg->address, msg->acknowledge_count, - msg->number_of_cpus); - for (j = 0; j < msg->number_of_cpus; j++) { - if (!((1L << j) & msp->seen_by.bits)) { - count++; - printk("%d ", j); - } + bcp = &per_cpu(bau_control, smp_processor_id()); + rap = (struct reset_args *)ptr; + stat = bcp->statp; + stat->d_resets++; + + /* + * We're looking for the given sender, and + * will free its sw_ack resource. + * If all cpu's finally responded after the timeout, its + * message 'replied_to' was set. + */ + for (msg = bcp->va_queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) { + /* uv_do_reset: same conditions for cancellation as + uv_bau_process_retry_msg() */ + if ((msg->replied_to == 0) && + (msg->canceled == 0) && + (msg->sending_cpu == rap->sender) && + (msg->sw_ack_vector) && + (msg->msg_type != MSG_NOOP)) { + /* + * make everyone else ignore this message + */ + msg->canceled = 1; + slot = msg - bcp->va_queue_first; + count++; + /* + * only reset the resource if it is still pending + */ + mmr = uv_read_local_mmr + (UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE); + msg_res = msg->sw_ack_vector; + if (mmr & msg_res) { + stat->d_rcanceled++; + uv_write_local_mmr( + UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, + (msg_res << UV_SW_ACK_NPENDING) | + msg_res); } - printk("\n"); } } - return count; + return; } /* - * Examine the payload queue on all the distribution nodes to see - * which messages have not been seen, and which cpu(s) have not seen them. - * - * Returns the number of cpu's that have not responded. + * Use IPI to get all target uvhubs to release resources held by + * a given sending cpu number. */ -static int uv_examine_destinations(struct bau_target_nodemask *distribution) +static void uv_reset_with_ipi(struct bau_target_uvhubmask *distribution, + int sender) { - int sender; - int i; - int count = 0; + int uvhub; + int cpu; + cpumask_t mask; + struct reset_args reset_args; + + reset_args.sender = sender; - sender = smp_processor_id(); - for (i = 0; i < sizeof(struct bau_target_nodemask) * BITSPERBYTE; i++) { - if (!bau_node_isset(i, distribution)) + cpus_clear(mask); + /* find a single cpu for each uvhub in this distribution mask */ + for (uvhub = 0; + uvhub < sizeof(struct bau_target_uvhubmask) * BITSPERBYTE; + uvhub++) { + if (!bau_uvhub_isset(uvhub, distribution)) continue; - count += uv_examine_destination(uv_bau_table_bases[i], sender); + /* find a cpu for this uvhub */ + cpu = uvhub_to_first_cpu(uvhub); + cpu_set(cpu, mask); } - return count; + /* IPI all cpus; Preemption is already disabled */ + smp_call_function_many(&mask, uv_do_reset, (void *)&reset_args, 1); + return; +} + +static inline unsigned long +cycles_2_us(unsigned long long cyc) +{ + unsigned long long ns; + unsigned long us; + ns = (cyc * per_cpu(cyc2ns, smp_processor_id())) + >> CYC2NS_SCALE_FACTOR; + us = ns / 1000; + return us; } /* - * wait for completion of a broadcast message - * - * return COMPLETE, RETRY or GIVEUP + * wait for all cpus on this hub to finish their sends and go quiet + * leaves uvhub_quiesce set so that no new broadcasts are started by + * bau_flush_send_and_wait() + */ +static inline void +quiesce_local_uvhub(struct bau_control *hmaster) +{ + atomic_add_short_return(1, (struct atomic_short *) + &hmaster->uvhub_quiesce); +} + +/* + * mark this quiet-requestor as done + */ +static inline void +end_uvhub_quiesce(struct bau_control *hmaster) +{ + atomic_add_short_return(-1, (struct atomic_short *) + &hmaster->uvhub_quiesce); +} + +/* + * Wait for completion of a broadcast software ack message + * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP */ static int uv_wait_completion(struct bau_desc *bau_desc, - unsigned long mmr_offset, int right_shift) + unsigned long mmr_offset, int right_shift, int this_cpu, + struct bau_control *bcp, struct bau_control *smaster, long try) { - int exams = 0; - long destination_timeouts = 0; - long source_timeouts = 0; unsigned long descriptor_status; + cycles_t ttime; + struct ptc_stats *stat = bcp->statp; + struct bau_control *hmaster; + hmaster = bcp->uvhub_master; + + /* spin on the status MMR, waiting for it to go idle */ while ((descriptor_status = (((unsigned long) uv_read_local_mmr(mmr_offset) >> right_shift) & UV_ACT_STATUS_MASK)) != DESC_STATUS_IDLE) { - if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { - source_timeouts++; - if (source_timeouts > SOURCE_TIMEOUT_LIMIT) - source_timeouts = 0; - __get_cpu_var(ptcstats).s_retry++; - return FLUSH_RETRY; - } /* - * spin here looking for progress at the destinations + * Our software ack messages may be blocked because there are + * no swack resources available. As long as none of them + * has timed out hardware will NACK our message and its + * state will stay IDLE. */ - if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) { - destination_timeouts++; - if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) { - /* - * returns number of cpus not responding - */ - if (uv_examine_destinations - (&bau_desc->distribution) == 0) { - __get_cpu_var(ptcstats).d_retry++; - return FLUSH_RETRY; - } - exams++; - if (exams >= uv_bau_retry_limit) { - printk(KERN_DEBUG - "uv_flush_tlb_others"); - printk("giving up on cpu %d\n", - smp_processor_id()); - return FLUSH_GIVEUP; - } - /* - * delays can hang the simulator - udelay(1000); - */ - destination_timeouts = 0; + if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { + stat->s_stimeout++; + return FLUSH_GIVEUP; + } else if (descriptor_status == + DESC_STATUS_DESTINATION_TIMEOUT) { + stat->s_dtimeout++; + ttime = get_cycles(); + + /* + * Our retries may be blocked by all destination + * swack resources being consumed, and a timeout + * pending. In that case hardware returns the + * ERROR that looks like a destination timeout. + */ + if (cycles_2_us(ttime - bcp->send_message) < + timeout_us) { + bcp->conseccompletes = 0; + return FLUSH_RETRY_PLUGGED; } + + bcp->conseccompletes = 0; + return FLUSH_RETRY_TIMEOUT; + } else { + /* + * descriptor_status is still BUSY + */ + cpu_relax(); } - cpu_relax(); } + bcp->conseccompletes++; return FLUSH_COMPLETE; } +static inline cycles_t +sec_2_cycles(unsigned long sec) +{ + unsigned long ns; + cycles_t cyc; + + ns = sec * 1000000000; + cyc = (ns << CYC2NS_SCALE_FACTOR)/(per_cpu(cyc2ns, smp_processor_id())); + return cyc; +} + +/* + * conditionally add 1 to *v, unless *v is >= u + * return 0 if we cannot add 1 to *v because it is >= u + * return 1 if we can add 1 to *v because it is < u + * the add is atomic + * + * This is close to atomic_add_unless(), but this allows the 'u' value + * to be lowered below the current 'v'. atomic_add_unless can only stop + * on equal. + */ +static inline int atomic_inc_unless_ge(spinlock_t *lock, atomic_t *v, int u) +{ + spin_lock(lock); + if (atomic_read(v) >= u) { + spin_unlock(lock); + return 0; + } + atomic_inc(v); + spin_unlock(lock); + return 1; +} + /** * uv_flush_send_and_wait * - * Send a broadcast and wait for a broadcast message to complete. + * Send a broadcast and wait for it to complete. * - * The flush_mask contains the cpus the broadcast was sent to. + * The flush_mask contains the cpus the broadcast is to be sent to including + * cpus that are on the local uvhub. * - * Returns NULL if all remote flushing was done. The mask is zeroed. - * Returns @flush_mask if some remote flushing remains to be done. The - * mask will have some bits still set. + * Returns 0 if all flushing represented in the mask was done. + * Returns 1 if it gives up entirely and the original cpu mask is to be + * returned to the kernel. */ -const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode, - struct bau_desc *bau_desc, - struct cpumask *flush_mask) +int uv_flush_send_and_wait(struct bau_desc *bau_desc, + struct cpumask *flush_mask, struct bau_control *bcp) { - int completion_status = 0; int right_shift; - int tries = 0; - int pnode; - int bit; + int completion_status = 0; + int seq_number = 0; + long try = 0; + int cpu = bcp->uvhub_cpu; + int tcpu; + int this_cpu = bcp->cpu; unsigned long mmr_offset; unsigned long index; cycles_t time1; cycles_t time2; + cycles_t elapsed; + cycles_t local_congested_cycles = congested_cycles; + struct ptc_stats *stat = bcp->statp; + struct bau_control *smaster = bcp->socket_master; + struct bau_control *hmaster = bcp->uvhub_master; + struct bau_control *tbcp; + + /* + * Spin here while there are hmaster->max_bau_concurrent or more active + * descriptors. This is the per-uvhub 'throttle'. + */ + if (!atomic_inc_unless_ge(&hmaster->uvhub_lock, + &hmaster->active_descriptor_count, + hmaster->max_bau_concurrent)) { + stat->s_throttles++; + do { + cpu_relax(); + } while (!atomic_inc_unless_ge(&hmaster->uvhub_lock, + &hmaster->active_descriptor_count, + hmaster->max_bau_concurrent)); + } + + while (hmaster->uvhub_quiesce) + cpu_relax(); if (cpu < UV_CPUS_PER_ACT_STATUS) { mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; @@ -268,44 +544,147 @@ const struct cpumask *uv_flush_send_and_ } time1 = get_cycles(); do { - tries++; + /* + * Every message from any given cpu gets a unique message + * sequence number. But retries use that same number. + * Our message may have timed out at the destination because + * all sw-ack resources are in use and there is a timeout + * pending there. In that case, our last send never got + * placed into the queue and we need to persist until it + * does. + * + * Make any retry a type MSG_RETRY so that the destination will + * free any resource held by a previous message from this cpu. + */ + if (try == 0) { + bau_desc->header.msg_type = MSG_REGULAR; + seq_number = bcp->message_number++; + } else { + bau_desc->header.msg_type = MSG_RETRY; + stat->s_retry_messages++; + } + bau_desc->header.sequence = seq_number; index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | - cpu; + bcp->uvhub_cpu; + bcp->send_message = get_cycles(); + uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); + + try++; completion_status = uv_wait_completion(bau_desc, mmr_offset, - right_shift); - } while (completion_status == FLUSH_RETRY); + right_shift, this_cpu, bcp, smaster, try); + + if (completion_status == FLUSH_RETRY_PLUGGED) { + /* + * Our retries may be blocked by all destination swack + * resources being consumed, and a timeout pending. In + * that case hardware immediately returns the ERROR + * that looks like a destination timeout. + */ + udelay(bcp->plugged_delay); + bcp->plugged_tries++; + if (bcp->plugged_tries >= bcp->plugsb4reset) { + bcp->plugged_tries = 0; + quiesce_local_uvhub(hmaster); + spin_lock(&hmaster->queue_lock); + uv_reset_with_ipi(&bau_desc->distribution, + this_cpu); + spin_unlock(&hmaster->queue_lock); + end_uvhub_quiesce(hmaster); + bcp->ipi_attempts++; + stat->s_resets_plug++; + } + } else if (completion_status == FLUSH_RETRY_TIMEOUT) { + hmaster->max_bau_concurrent = 1; + bcp->timeout_tries++; + if (bcp->timeout_tries >= bcp->timeoutsb4reset) { + bcp->timeout_tries = 0; + quiesce_local_uvhub(hmaster); + spin_lock(&hmaster->queue_lock); + uv_reset_with_ipi(&bau_desc->distribution, + this_cpu); + spin_unlock(&hmaster->queue_lock); + end_uvhub_quiesce(hmaster); + bcp->ipi_attempts++; + stat->s_resets_timeout++; + } + } + if (bcp->ipi_attempts >= bcp->ipi_reset_limit) { + bcp->ipi_attempts = 0; + completion_status = FLUSH_GIVEUP; + break; + } + cpu_relax(); + } while ((completion_status == FLUSH_RETRY_PLUGGED) || + (completion_status == FLUSH_RETRY_TIMEOUT)); time2 = get_cycles(); - __get_cpu_var(ptcstats).sflush += (time2 - time1); - if (tries > 1) - __get_cpu_var(ptcstats).retriesok++; - if (completion_status == FLUSH_GIVEUP) { + bcp->plugged_tries = 0; + bcp->timeout_tries = 0; + + if ((completion_status == FLUSH_COMPLETE) && + (bcp->conseccompletes > bcp->complete_threshold) && + (hmaster->max_bau_concurrent < + hmaster->max_bau_concurrent_constant)) + hmaster->max_bau_concurrent++; + + /* + * hold any cpu not timing out here; no other cpu currently held by + * the 'throttle' should enter the activation code + */ + while (hmaster->uvhub_quiesce) + cpu_relax(); + atomic_dec(&hmaster->active_descriptor_count); + + /* guard against cycles wrap */ + if (time2 > time1) { + elapsed = time2 - time1; + stat->s_time += elapsed; + /* check for a sustained long, non-timeout request times */ + if ((completion_status == FLUSH_COMPLETE) && (try == 1)) { + bcp->period_requests++; + bcp->period_time += elapsed; + if ((elapsed > local_congested_cycles) && + (bcp->period_requests > bcp->congested_reps)) { + /* let only one cpu do this disabling */ + spin_lock(&disable_lock); + if (!baudisabled && bcp->period_requests && + ((bcp->period_time / bcp->period_requests) > + local_congested_cycles)) { + /* it becomes this cpu's job to turn + on the use of the BAU again */ + baudisabled = 1; + bcp->set_bau_off = 1; + bcp->set_bau_on_time = get_cycles() + + sec_2_cycles(bcp->congested_period); + stat->s_bau_disabled++; + for_each_present_cpu(tcpu) { + tbcp = &per_cpu(bau_control, + tcpu); + tbcp->baudisabled = 1; + } + } + spin_unlock(&disable_lock); + } + } + } else + stat->s_requestor--; /* don't count this one */ + if (completion_status == FLUSH_COMPLETE && try > 1) + stat->s_retriesok++; + else if (completion_status == FLUSH_GIVEUP) { /* * Cause the caller to do an IPI-style TLB shootdown on - * the cpu's, all of which are still in the mask. + * the target cpu's using the original mask. */ - __get_cpu_var(ptcstats).ptc_i++; - return flush_mask; + stat->s_giveup++; + return 1; } - /* - * Success, so clear the remote cpu's from the mask so we don't - * use the IPI method of shootdown on them. + * Success */ - for_each_cpu(bit, flush_mask) { - pnode = uv_cpu_to_pnode(bit); - if (pnode == this_pnode) - continue; - cpumask_clear_cpu(bit, flush_mask); - } - if (!cpumask_empty(flush_mask)) - return flush_mask; - return NULL; + return 0; } -static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask); - /** * uv_flush_tlb_others - globally purge translation cache of a virtual * address or all TLB's @@ -322,8 +701,8 @@ static DEFINE_PER_CPU(cpumask_var_t, uv_ * The caller has derived the cpumask from the mm_struct. This function * is called only if there are bits set in the mask. (e.g. flush_tlb_page()) * - * The cpumask is converted into a nodemask of the nodes containing - * the cpus. + * The cpumask is converted into a uvhubmask of the uvhubs containing + * those cpus. * * Note that this function should be called with preemption disabled. * @@ -335,52 +714,100 @@ const struct cpumask *uv_flush_tlb_other struct mm_struct *mm, unsigned long va, unsigned int cpu) { - struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask); - int i; - int bit; - int pnode; - int uv_cpu; - int this_pnode; + int tcpu; + int uvhub; int locals = 0; + int remotes = 0; + int hubs = 0; struct bau_desc *bau_desc; + struct cpumask *flush_mask; + struct ptc_stats *stat; + struct bau_control *bcp; + struct bau_control *tbcp; - cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); + bcp = &per_cpu(bau_control, cpu); + stat = bcp->statp; - uv_cpu = uv_blade_processor_id(); - this_pnode = uv_hub_info->pnode; - bau_desc = __get_cpu_var(bau_control).descriptor_base; - bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu; - - bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); - - i = 0; - for_each_cpu(bit, flush_mask) { - pnode = uv_cpu_to_pnode(bit); - BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1)); - if (pnode == this_pnode) { - locals++; - continue; + /* bau was disabled due to slow response */ + if (bcp->baudisabled) { + /* the cpu that disabled it must re-enable it */ + if (bcp->set_bau_off) { + if (get_cycles() >= bcp->set_bau_on_time) { + stat->s_bau_reenabled++; + baudisabled = 0; + for_each_present_cpu(tcpu) { + tbcp = &per_cpu(bau_control, tcpu); + tbcp->baudisabled = 0; + tbcp->period_requests = 0; + tbcp->period_time = 0; + } + } } - bau_node_set(pnode - uv_partition_base_pnode, - &bau_desc->distribution); - i++; + return cpumask; } - if (i == 0) { - /* - * no off_node flushing; return status for local node - */ - if (locals) - return flush_mask; + + /* + * Each sending cpu has a per-cpu mask which it fills from the caller's + * cpu mask. All cpus are converted to uvhubs and copied to the + * activation descriptor. + */ + flush_mask = (struct cpumask *)per_cpu(uv_flush_tlb_mask, cpu); + /* don't actually do a shootdown of the local cpu */ + cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); + if (cpu_isset(cpu, *cpumask)) + stat->s_ntargself++; + + bau_desc = bcp->descriptor_base; + bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu; + bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); + + /* cpu statistics */ + for_each_cpu(tcpu, flush_mask) { + uvhub = uv_cpu_to_blade_id(tcpu); + bau_uvhub_set(uvhub, &bau_desc->distribution); + if (uvhub == bcp->uvhub) + locals++; else - return NULL; + remotes++; } - __get_cpu_var(ptcstats).requestor++; - __get_cpu_var(ptcstats).ntargeted += i; + if ((locals + remotes) == 0) + return NULL; + stat->s_requestor++; + stat->s_ntargcpu += remotes + locals; + stat->s_ntargremotes += remotes; + stat->s_ntarglocals += locals; + remotes = bau_uvhub_weight(&bau_desc->distribution); + + /* uvhub statistics */ + hubs = bau_uvhub_weight(&bau_desc->distribution); + if (locals) { + stat->s_ntarglocaluvhub++; + stat->s_ntargremoteuvhub += (hubs - 1); + } else + stat->s_ntargremoteuvhub += hubs; + stat->s_ntarguvhub += hubs; + if (hubs >= 16) + stat->s_ntarguvhub16++; + else if (hubs >= 8) + stat->s_ntarguvhub8++; + else if (hubs >= 4) + stat->s_ntarguvhub4++; + else if (hubs >= 2) + stat->s_ntarguvhub2++; + else + stat->s_ntarguvhub1++; bau_desc->payload.address = va; bau_desc->payload.sending_cpu = cpu; - return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask); + /* + * uv_flush_send_and_wait returns 0 if all cpu's were messaged, + * or 1 if it gave up and the original cpumask should be returned. + */ + if (!uv_flush_send_and_wait(bau_desc, flush_mask, bcp)) + return NULL; + else + return cpumask; } /* @@ -389,87 +816,70 @@ const struct cpumask *uv_flush_tlb_other * * We received a broadcast assist message. * - * Interrupts may have been disabled; this interrupt could represent + * Interrupts are disabled; this interrupt could represent * the receipt of several messages. * - * All cores/threads on this node get this interrupt. - * The last one to see it does the s/w ack. + * All cores/threads on this hub get this interrupt. + * The last one to see it does the software ack. * (the resource will not be freed until noninterruptable cpus see this - * interrupt; hardware will timeout the s/w ack and reply ERROR) + * interrupt; hardware may timeout the s/w ack and reply ERROR) */ void uv_bau_message_interrupt(struct pt_regs *regs) { - struct bau_payload_queue_entry *va_queue_first; - struct bau_payload_queue_entry *va_queue_last; - struct bau_payload_queue_entry *msg; - struct pt_regs *old_regs = set_irq_regs(regs); - cycles_t time1; - cycles_t time2; - int msg_slot; - int sw_ack_slot; - int fw; int count = 0; - unsigned long local_pnode; - - ack_APIC_irq(); - exit_idle(); - irq_enter(); - - time1 = get_cycles(); - - local_pnode = uv_blade_to_pnode(uv_numa_blade_id()); - - va_queue_first = __get_cpu_var(bau_control).va_queue_first; - va_queue_last = __get_cpu_var(bau_control).va_queue_last; + cycles_t time_start; + struct bau_payload_queue_entry *msg; + struct bau_control *bcp; + struct ptc_stats *stat; + struct msg_desc msgdesc; - msg = __get_cpu_var(bau_control).bau_msg_head; + time_start = get_cycles(); + bcp = &per_cpu(bau_control, smp_processor_id()); + stat = bcp->statp; + msgdesc.va_queue_first = bcp->va_queue_first; + msgdesc.va_queue_last = bcp->va_queue_last; + msg = bcp->bau_msg_head; while (msg->sw_ack_vector) { count++; - fw = msg->sw_ack_vector; - msg_slot = msg - va_queue_first; - sw_ack_slot = ffs(fw) - 1; - - uv_bau_process_message(msg, msg_slot, sw_ack_slot); - + msgdesc.msg_slot = msg - msgdesc.va_queue_first; + msgdesc.sw_ack_slot = ffs(msg->sw_ack_vector) - 1; + msgdesc.msg = msg; + uv_bau_process_message(&msgdesc, bcp); msg++; - if (msg > va_queue_last) - msg = va_queue_first; - __get_cpu_var(bau_control).bau_msg_head = msg; + if (msg > msgdesc.va_queue_last) + msg = msgdesc.va_queue_first; + bcp->bau_msg_head = msg; } + stat->d_time += (get_cycles() - time_start); if (!count) - __get_cpu_var(ptcstats).nomsg++; + stat->d_nomsg++; else if (count > 1) - __get_cpu_var(ptcstats).multmsg++; - - time2 = get_cycles(); - __get_cpu_var(ptcstats).dflush += (time2 - time1); - - irq_exit(); - set_irq_regs(old_regs); + stat->d_multmsg++; + ack_APIC_irq(); } /* * uv_enable_timeouts * - * Each target blade (i.e. blades that have cpu's) needs to have + * Each target uvhub (i.e. a uvhub that has no cpu's) needs to have * shootdown message timeouts enabled. The timeout does not cause * an interrupt, but causes an error message to be returned to * the sender. */ static void uv_enable_timeouts(void) { - int blade; - int nblades; + int uvhub; + int nuvhubs; int pnode; unsigned long mmr_image; - nblades = uv_num_possible_blades(); + nuvhubs = uv_num_possible_blades(); - for (blade = 0; blade < nblades; blade++) { - if (!uv_blade_nr_possible_cpus(blade)) + for (uvhub = 0; uvhub < nuvhubs; uvhub++) { + if (!uv_blade_nr_possible_cpus(uvhub)) continue; - pnode = uv_blade_to_pnode(blade); + pnode = uv_blade_to_pnode(uvhub); mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL); /* @@ -479,16 +889,16 @@ static void uv_enable_timeouts(void) * To program the period, the SOFT_ACK_MODE must be off. */ mmr_image &= ~((unsigned long)1 << - UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT); uv_write_global_mmr64 (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); /* * Set the 4-bit period. */ mmr_image &= ~((unsigned long)0xf << - UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT); mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD << - UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT); uv_write_global_mmr64 (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); /* @@ -497,7 +907,7 @@ static void uv_enable_timeouts(void) * indicated in bits 2:0 (7 causes all of them to timeout). */ mmr_image |= ((unsigned long)1 << - UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT); uv_write_global_mmr64 (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); } @@ -522,9 +932,20 @@ static void uv_ptc_seq_stop(struct seq_f { } +static inline unsigned long long +microsec_2_cycles(unsigned long microsec) +{ + unsigned long ns; + unsigned long long cyc; + + ns = microsec * 1000; + cyc = (ns << CYC2NS_SCALE_FACTOR)/(per_cpu(cyc2ns, smp_processor_id())); + return cyc; +} + /* - * Display the statistics thru /proc - * data points to the cpu number + * Display the statistics thru /proc. + * 'data' points to the cpu number */ static int uv_ptc_seq_show(struct seq_file *file, void *data) { @@ -535,80 +956,315 @@ static int uv_ptc_seq_show(struct seq_fi if (!cpu) { seq_printf(file, - "# cpu requestor requestee one all sretry dretry ptc_i "); + "# cpu sent stime self locals remotes ncpus localhub "); + seq_printf(file, + "remotehub numuvhubs numuvhubs16 numuvhubs8 "); + seq_printf(file, + "numuvhubs4 numuvhubs2 numuvhubs1 dto "); + seq_printf(file, + "retries rok resetp resett giveup sto bz throt "); + seq_printf(file, + "sw_ack recv rtime all "); + seq_printf(file, + "one mult none retry canc nocan reset rcan "); seq_printf(file, - "sw_ack sflush dflush sok dnomsg dmult starget\n"); + "disable enable\n"); } if (cpu < num_possible_cpus() && cpu_online(cpu)) { stat = &per_cpu(ptcstats, cpu); - seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld ", - cpu, stat->requestor, - stat->requestee, stat->onetlb, stat->alltlb, - stat->s_retry, stat->d_retry, stat->ptc_i); - seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n", + /* source side statistics */ + seq_printf(file, + "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ", + cpu, stat->s_requestor, cycles_2_us(stat->s_time), + stat->s_ntargself, stat->s_ntarglocals, + stat->s_ntargremotes, stat->s_ntargcpu, + stat->s_ntarglocaluvhub, stat->s_ntargremoteuvhub, + stat->s_ntarguvhub, stat->s_ntarguvhub16); + seq_printf(file, "%ld %ld %ld %ld %ld ", + stat->s_ntarguvhub8, stat->s_ntarguvhub4, + stat->s_ntarguvhub2, stat->s_ntarguvhub1, + stat->s_dtimeout); + seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld ", + stat->s_retry_messages, stat->s_retriesok, + stat->s_resets_plug, stat->s_resets_timeout, + stat->s_giveup, stat->s_stimeout, + stat->s_busy, stat->s_throttles); + + /* destination side statistics */ + seq_printf(file, + "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ", uv_read_global_mmr64(uv_cpu_to_pnode(cpu), UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), - stat->sflush, stat->dflush, - stat->retriesok, stat->nomsg, - stat->multmsg, stat->ntargeted); + stat->d_requestee, cycles_2_us(stat->d_time), + stat->d_alltlb, stat->d_onetlb, stat->d_multmsg, + stat->d_nomsg, stat->d_retries, stat->d_canceled, + stat->d_nocanceled, stat->d_resets, + stat->d_rcanceled); + seq_printf(file, "%ld %ld\n", + stat->s_bau_disabled, stat->s_bau_reenabled); } return 0; } /* + * Display the tunables thru debugfs + */ +static ssize_t tunables_read(struct file *file, char __user *userbuf, + size_t count, loff_t *ppos) +{ + char buf[300]; + int ret; + + ret = snprintf(buf, 300, "%s %s %s\n%d %d %d %d %d %d %d %d %d\n", + "max_bau_concurrent plugged_delay plugsb4reset", + "timeoutsb4reset ipi_reset_limit complete_threshold", + "congested_response_us congested_reps congested_period", + max_bau_concurrent, plugged_delay, plugsb4reset, + timeoutsb4reset, ipi_reset_limit, complete_threshold, + congested_response_us, congested_reps, congested_period); + + return simple_read_from_buffer(userbuf, count, ppos, buf, ret); +} + +/* + * -1: resetf the statistics * 0: display meaning of the statistics - * >0: retry limit */ static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, size_t count, loff_t *data) { - long newmode; + int cpu; + long input_arg; char optstr[64]; + struct ptc_stats *stat; if (count == 0 || count > sizeof(optstr)) return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; optstr[count - 1] = '\0'; - if (strict_strtoul(optstr, 10, &newmode) < 0) { + if (strict_strtol(optstr, 10, &input_arg) < 0) { printk(KERN_DEBUG "%s is invalid\n", optstr); return -EINVAL; } - if (newmode == 0) { + if (input_arg == 0) { printk(KERN_DEBUG "# cpu: cpu number\n"); + printk(KERN_DEBUG "Sender statistics:\n"); printk(KERN_DEBUG - "requestor: times this cpu was the flush requestor\n"); + "sent: number of shootdown messages sent\n"); printk(KERN_DEBUG - "requestee: times this cpu was requested to flush its TLBs\n"); + "stime: time spent sending messages\n"); printk(KERN_DEBUG - "one: times requested to flush a single address\n"); + "numuvhubs: number of hubs targeted with shootdown\n"); printk(KERN_DEBUG - "all: times requested to flush all TLB's\n"); + "numuvhubs16: number times 16 or more hubs targeted\n"); printk(KERN_DEBUG - "sretry: number of retries of source-side timeouts\n"); + "numuvhubs8: number times 8 or more hubs targeted\n"); printk(KERN_DEBUG - "dretry: number of retries of destination-side timeouts\n"); + "numuvhubs4: number times 4 or more hubs targeted\n"); printk(KERN_DEBUG - "ptc_i: times UV fell through to IPI-style flushes\n"); + "numuvhubs2: number times 2 or more hubs targeted\n"); printk(KERN_DEBUG - "sw_ack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n"); + "numuvhubs1: number times 1 hub targeted\n"); printk(KERN_DEBUG - "sflush_us: cycles spent in uv_flush_tlb_others()\n"); + "numcpus: number of cpus targeted with shootdown\n"); printk(KERN_DEBUG - "dflush_us: cycles spent in handling flush requests\n"); - printk(KERN_DEBUG "sok: successes on retry\n"); - printk(KERN_DEBUG "dnomsg: interrupts with no message\n"); + "dto: number of destination timeouts\n"); printk(KERN_DEBUG - "dmult: interrupts with multiple messages\n"); - printk(KERN_DEBUG "starget: nodes targeted\n"); - } else { - uv_bau_retry_limit = newmode; - printk(KERN_DEBUG "timeout retry limit:%d\n", - uv_bau_retry_limit); + "retries: destination timeout retries sent\n"); + printk(KERN_DEBUG + "rok: : destination timeouts successfully retried\n"); + printk(KERN_DEBUG + "resetp: ipi-style resource resets for plugs\n"); + printk(KERN_DEBUG + "resett: ipi-style resource resets for timeouts\n"); + printk(KERN_DEBUG + "giveup: fall-backs to ipi-style shootdowns\n"); + printk(KERN_DEBUG + "sto: number of source timeouts\n"); + printk(KERN_DEBUG + "bz: number of stay-busy's\n"); + printk(KERN_DEBUG + "throt: number times spun in throttle\n"); + printk(KERN_DEBUG "Destination side statistics:\n"); + printk(KERN_DEBUG + "sw_ack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n"); + printk(KERN_DEBUG + "recv: shootdown messages received\n"); + printk(KERN_DEBUG + "rtime: time spent processing messages\n"); + printk(KERN_DEBUG + "all: shootdown all-tlb messages\n"); + printk(KERN_DEBUG + "one: shootdown one-tlb messages\n"); + printk(KERN_DEBUG + "mult: interrupts that found multiple messages\n"); + printk(KERN_DEBUG + "none: interrupts that found no messages\n"); + printk(KERN_DEBUG + "retry: number of retry messages processed\n"); + printk(KERN_DEBUG + "canc: number messages canceled by retries\n"); + printk(KERN_DEBUG + "nocan: number retries that found nothing to cancel\n"); + printk(KERN_DEBUG + "reset: number of ipi-style reset requests processed\n"); + printk(KERN_DEBUG + "rcan: number messages canceled by reset requests\n"); + printk(KERN_DEBUG + "disable: number times use of the BAU was disabled\n"); + printk(KERN_DEBUG + "enable: number times use of the BAU was re-enabled\n"); + } else if (input_arg == -1) { + for_each_present_cpu(cpu) { + stat = &per_cpu(ptcstats, cpu); + memset(stat, 0, sizeof(struct ptc_stats)); + } + } + + return count; +} + +static int local_atoi(const char *name) +{ + int val = 0; + + for (;; name++) { + switch (*name) { + case '0' ... '9': + val = 10*val+(*name-'0'); + break; + default: + return val; + } + } +} + +/* + * set the tunables + * 0 values reset them to defaults + */ +static ssize_t tunables_write(struct file *file, const char __user *user, + size_t count, loff_t *data) +{ + int cpu; + int cnt = 0; + int val; + char *p; + char *q; + char instr[64]; + struct bau_control *bcp; + + if (count == 0 || count > sizeof(instr)-1) + return -EINVAL; + if (copy_from_user(instr, user, count)) + return -EFAULT; + + instr[count] = '\0'; + /* count the fields */ + p = instr + strspn(instr, WHITESPACE); + q = p; + for (; *p; p = q + strspn(q, WHITESPACE)) { + q = p + strcspn(p, WHITESPACE); + cnt++; + if (q == p) + break; + } + if (cnt != 9) { + printk(KERN_INFO "bau tunable error: should be 9 numbers\n"); + return -EINVAL; } + p = instr + strspn(instr, WHITESPACE); + q = p; + for (cnt = 0; *p; p = q + strspn(q, WHITESPACE), cnt++) { + q = p + strcspn(p, WHITESPACE); + val = local_atoi(p); + switch (cnt) { + case 0: + if (val == 0) { + max_bau_concurrent = MAX_BAU_CONCURRENT; + max_bau_concurrent_constant = + MAX_BAU_CONCURRENT; + continue; + } + bcp = &per_cpu(bau_control, smp_processor_id()); + if (val < 1 || val > bcp->cpus_in_uvhub) { + printk(KERN_DEBUG + "Error: BAU max concurrent %d is invalid\n", + val); + return -EINVAL; + } + max_bau_concurrent = val; + max_bau_concurrent_constant = val; + continue; + case 1: + if (val == 0) + plugged_delay = PLUGGED_DELAY; + else + plugged_delay = val; + continue; + case 2: + if (val == 0) + plugsb4reset = PLUGSB4RESET; + else + plugsb4reset = val; + continue; + case 3: + if (val == 0) + timeoutsb4reset = TIMEOUTSB4RESET; + else + timeoutsb4reset = val; + continue; + case 4: + if (val == 0) + ipi_reset_limit = IPI_RESET_LIMIT; + else + ipi_reset_limit = val; + continue; + case 5: + if (val == 0) + complete_threshold = COMPLETE_THRESHOLD; + else + complete_threshold = val; + continue; + case 6: + if (val == 0) + congested_response_us = CONGESTED_RESPONSE_US; + else + congested_response_us = val; + continue; + case 7: + if (val == 0) + congested_reps = CONGESTED_REPS; + else + congested_reps = val; + continue; + case 8: + if (val == 0) + congested_period = CONGESTED_PERIOD; + else + congested_period = val; + continue; + } + if (q == p) + break; + } + for_each_present_cpu(cpu) { + bcp = &per_cpu(bau_control, cpu); + bcp->max_bau_concurrent = max_bau_concurrent; + bcp->max_bau_concurrent_constant = max_bau_concurrent; + bcp->plugged_delay = plugged_delay; + bcp->plugsb4reset = plugsb4reset; + bcp->timeoutsb4reset = timeoutsb4reset; + bcp->ipi_reset_limit = ipi_reset_limit; + bcp->complete_threshold = complete_threshold; + bcp->congested_response_us = congested_response_us; + bcp->congested_reps = congested_reps; + bcp->congested_period = congested_period; + } return count; } @@ -624,6 +1280,11 @@ static int uv_ptc_proc_open(struct inode return seq_open(file, &uv_ptc_seq_ops); } +static int tunables_open(struct inode *inode, struct file *file) +{ + return 0; +} + static const struct file_operations proc_uv_ptc_operations = { .open = uv_ptc_proc_open, .read = seq_read, @@ -632,6 +1293,12 @@ static const struct file_operations proc .release = seq_release, }; +static const struct file_operations tunables_fops = { + .open = tunables_open, + .read = tunables_read, + .write = tunables_write, +}; + static int __init uv_ptc_init(void) { struct proc_dir_entry *proc_uv_ptc; @@ -646,83 +1313,48 @@ static int __init uv_ptc_init(void) UV_PTC_BASENAME); return -EINVAL; } - return 0; -} - -/* - * begin the initialization of the per-blade control structures - */ -static struct bau_control * __init uv_table_bases_init(int blade, int node) -{ - int i; - struct bau_msg_status *msp; - struct bau_control *bau_tabp; - - bau_tabp = - kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node); - BUG_ON(!bau_tabp); - - bau_tabp->msg_statuses = - kmalloc_node(sizeof(struct bau_msg_status) * - DEST_Q_SIZE, GFP_KERNEL, node); - BUG_ON(!bau_tabp->msg_statuses); - - for (i = 0, msp = bau_tabp->msg_statuses; i < DEST_Q_SIZE; i++, msp++) - bau_cpubits_clear(&msp->seen_by, (int) - uv_blade_nr_possible_cpus(blade)); - - uv_bau_table_bases[blade] = bau_tabp; - return bau_tabp; -} - -/* - * finish the initialization of the per-blade control structures - */ -static void __init -uv_table_bases_finish(int blade, - struct bau_control *bau_tablesp, - struct bau_desc *adp) -{ - struct bau_control *bcp; - int cpu; - - for_each_present_cpu(cpu) { - if (blade != uv_cpu_to_blade_id(cpu)) - continue; - - bcp = (struct bau_control *)&per_cpu(bau_control, cpu); - bcp->bau_msg_head = bau_tablesp->va_queue_first; - bcp->va_queue_first = bau_tablesp->va_queue_first; - bcp->va_queue_last = bau_tablesp->va_queue_last; - bcp->msg_statuses = bau_tablesp->msg_statuses; - bcp->descriptor_base = adp; + tunables_dir = debugfs_create_dir(UV_BAU_TUNABLES_DIR, NULL); + if (!tunables_dir) { + printk(KERN_ERR "unable to create debugfs directory %s\n", + UV_BAU_TUNABLES_DIR); + return -EINVAL; + } + tunables_file = debugfs_create_file(UV_BAU_TUNABLES_FILE, 0600, + tunables_dir, NULL, &tunables_fops); + if (!tunables_file) { + printk(KERN_ERR "unable to create debugfs file %s\n", + UV_BAU_TUNABLES_FILE); + return -EINVAL; } + return 0; } /* * initialize the sending side's sending buffers */ -static struct bau_desc * __init +static void uv_activation_descriptor_init(int node, int pnode) { int i; + int cpu; unsigned long pa; unsigned long m; unsigned long n; - struct bau_desc *adp; - struct bau_desc *ad2; + struct bau_desc *bau_desc; + struct bau_desc *bd2; + struct bau_control *bcp; /* * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR) - * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per blade + * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub */ - adp = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)* + bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)* UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node); - BUG_ON(!adp); + BUG_ON(!bau_desc); - pa = uv_gpa(adp); /* need the real nasid*/ - n = uv_gpa_to_pnode(pa); + pa = uv_gpa(bau_desc); /* need the real nasid*/ + n = pa >> uv_nshift; m = pa & uv_mmask; uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, @@ -731,96 +1363,243 @@ uv_activation_descriptor_init(int node, /* * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each * cpu even though we only use the first one; one descriptor can - * describe a broadcast to 256 nodes. + * describe a broadcast to 256 uv hubs. */ - for (i = 0, ad2 = adp; i < (UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR); - i++, ad2++) { - memset(ad2, 0, sizeof(struct bau_desc)); - ad2->header.sw_ack_flag = 1; + for (i = 0, bd2 = bau_desc; i < (UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR); + i++, bd2++) { + memset(bd2, 0, sizeof(struct bau_desc)); + bd2->header.sw_ack_flag = 1; /* - * base_dest_nodeid is the first node in the partition, so - * the bit map will indicate partition-relative node numbers. - * note that base_dest_nodeid is actually a nasid. + * base_dest_nodeid is the nasid (pnode<<1) of the first uvhub + * in the partition. The bit map will indicate uvhub numbers, + * which are 0-N in a partition. Pnodes are unique system-wide. */ - ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1; - ad2->header.dest_subnodeid = 0x10; /* the LB */ - ad2->header.command = UV_NET_ENDPOINT_INTD; - ad2->header.int_both = 1; + bd2->header.base_dest_nodeid = uv_partition_base_pnode << 1; + bd2->header.dest_subnodeid = 0x10; /* the LB */ + bd2->header.command = UV_NET_ENDPOINT_INTD; + bd2->header.int_both = 1; /* * all others need to be set to zero: * fairness chaining multilevel count replied_to */ } - return adp; + for_each_present_cpu(cpu) { + if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu))) + continue; + bcp = &per_cpu(bau_control, cpu); + bcp->descriptor_base = bau_desc; + } } /* * initialize the destination side's receiving buffers + * entered for each uvhub in the partition + * - node is first node (kernel memory notion) on the uvhub + * - pnode is the uvhub's physical identifier */ -static struct bau_payload_queue_entry * __init -uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) +static void +uv_payload_queue_init(int node, int pnode) { - struct bau_payload_queue_entry *pqp; - unsigned long pa; int pn; + int cpu; char *cp; + unsigned long pa; + struct bau_payload_queue_entry *pqp; + struct bau_payload_queue_entry *pqp_malloc; + struct bau_control *bcp; pqp = (struct bau_payload_queue_entry *) kmalloc_node( (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry), GFP_KERNEL, node); BUG_ON(!pqp); + pqp_malloc = pqp; cp = (char *)pqp + 31; pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); - bau_tablesp->va_queue_first = pqp; + + for_each_present_cpu(cpu) { + if (pnode != uv_cpu_to_pnode(cpu)) + continue; + /* for every cpu on this pnode: */ + bcp = &per_cpu(bau_control, cpu); + bcp->va_queue_first = pqp; + bcp->bau_msg_head = pqp; + bcp->va_queue_last = pqp + (DEST_Q_SIZE - 1); + } /* * need the pnode of where the memory was really allocated */ pa = uv_gpa(pqp); - pn = uv_gpa_to_pnode(pa); + pn = pa >> uv_nshift; uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | uv_physnodeaddr(pqp)); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, uv_physnodeaddr(pqp)); - bau_tablesp->va_queue_last = pqp + (DEST_Q_SIZE - 1); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, (unsigned long) - uv_physnodeaddr(bau_tablesp->va_queue_last)); + uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1))); + /* in effect, all msg_type's are set to MSG_NOOP */ memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE); - - return pqp; } /* - * Initialization of each UV blade's structures + * Initialization of each UV hub's structures */ -static int __init uv_init_blade(int blade) +static void __init uv_init_uvhub(int uvhub, int vector) { int node; int pnode; - unsigned long pa; unsigned long apicid; - struct bau_desc *adp; - struct bau_payload_queue_entry *pqp; - struct bau_control *bau_tablesp; - node = blade_to_first_node(blade); - bau_tablesp = uv_table_bases_init(blade, node); - pnode = uv_blade_to_pnode(blade); - adp = uv_activation_descriptor_init(node, pnode); - pqp = uv_payload_queue_init(node, pnode, bau_tablesp); - uv_table_bases_finish(blade, bau_tablesp, adp); + node = uvhub_to_first_node(uvhub); + pnode = uv_blade_to_pnode(uvhub); + uv_activation_descriptor_init(node, pnode); + uv_payload_queue_init(node, pnode); /* * the below initialization can't be in firmware because the * messaging IRQ will be determined by the OS */ - apicid = blade_to_first_apicid(blade); - pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); + apicid = uvhub_to_first_apicid(uvhub); uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, - ((apicid << 32) | UV_BAU_MESSAGE)); - return 0; + ((apicid << 32) | vector)); +} + +/* + * We will set BAU_MISC_CONTROL with a timeout period. + * But the BIOS has set UVH_AGING_PRESCALE_SEL and UVH_TRANSACTION_TIMEOUT. + * So the destination timeout period has be be calculated from them. + */ +static int +calculate_destination_timeout(void) +{ + unsigned long mmr_image; + int mult1; + int mult2; + int index; + int base; + int ret; + unsigned long ts_ns; + + mult1 = UV_INTD_SOFT_ACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK; + mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL); + index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK; + mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT); + mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK; + base = timeout_base_ns[index]; + ts_ns = base * mult1 * mult2; + ret = ts_ns / 1000; + return ret; +} + +/* + * initialize the bau_control structure for each cpu + */ +static void uv_init_per_cpu(int nuvhubs) +{ + int i; + int cpu; + int pnode; + int uvhub; + short socket = 0; + unsigned short socket_mask; + unsigned int uvhub_mask; + struct bau_control *bcp; + struct uvhub_desc *bdp; + struct socket_desc *sdp; + struct bau_control *hmaster = NULL; + struct bau_control *smaster = NULL; + struct socket_desc { + short num_cpus; + short cpu_number[16]; + }; + struct uvhub_desc { + unsigned short socket_mask; + short num_cpus; + short uvhub; + short pnode; + struct socket_desc socket[2]; + }; + struct uvhub_desc *uvhub_descs; + + timeout_us = calculate_destination_timeout(); + + uvhub_descs = (struct uvhub_desc *) + kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL); + memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc)); + for_each_present_cpu(cpu) { + bcp = &per_cpu(bau_control, cpu); + memset(bcp, 0, sizeof(struct bau_control)); + pnode = uv_cpu_hub_info(cpu)->pnode; + uvhub = uv_cpu_hub_info(cpu)->numa_blade_id; + uvhub_mask |= (1 << uvhub); + bdp = &uvhub_descs[uvhub]; + bdp->num_cpus++; + bdp->uvhub = uvhub; + bdp->pnode = pnode; + /* kludge: 'assuming' one node per socket, and assuming that + disabling a socket just leaves a gap in node numbers */ + socket = (cpu_to_node(cpu) & 1);; + bdp->socket_mask |= (1 << socket); + sdp = &bdp->socket[socket]; + sdp->cpu_number[sdp->num_cpus] = cpu; + sdp->num_cpus++; + } + uvhub = 0; + while (uvhub_mask) { + if (!(uvhub_mask & 1)) + goto nexthub; + bdp = &uvhub_descs[uvhub]; + socket_mask = bdp->socket_mask; + socket = 0; + while (socket_mask) { + if (!(socket_mask & 1)) + goto nextsocket; + sdp = &bdp->socket[socket]; + for (i = 0; i < sdp->num_cpus; i++) { + cpu = sdp->cpu_number[i]; + bcp = &per_cpu(bau_control, cpu); + bcp->cpu = cpu; + if (i == 0) { + smaster = bcp; + if (socket == 0) + hmaster = bcp; + } + bcp->cpus_in_uvhub = bdp->num_cpus; + bcp->cpus_in_socket = sdp->num_cpus; + bcp->socket_master = smaster; + bcp->uvhub = bdp->uvhub; + bcp->uvhub_master = hmaster; + bcp->uvhub_cpu = uv_cpu_hub_info(cpu)-> + blade_processor_id; + } +nextsocket: + socket++; + socket_mask = (socket_mask >> 1); + } +nexthub: + uvhub++; + uvhub_mask = (uvhub_mask >> 1); + } + kfree(uvhub_descs); + for_each_present_cpu(cpu) { + bcp = &per_cpu(bau_control, cpu); + bcp->baudisabled = 0; + bcp->statp = &per_cpu(ptcstats, cpu); + /* time interval to catch a hardware stay-busy bug */ + bcp->timeout_interval = microsec_2_cycles(2*timeout_us); + bcp->max_bau_concurrent = max_bau_concurrent; + bcp->max_bau_concurrent_constant = max_bau_concurrent; + bcp->plugged_delay = plugged_delay; + bcp->plugsb4reset = plugsb4reset; + bcp->timeoutsb4reset = timeoutsb4reset; + bcp->ipi_reset_limit = ipi_reset_limit; + bcp->complete_threshold = complete_threshold; + bcp->congested_response_us = congested_response_us; + bcp->congested_reps = congested_reps; + bcp->congested_period = congested_period; + } } /* @@ -828,38 +1607,55 @@ static int __init uv_init_blade(int blad */ static int __init uv_bau_init(void) { - int blade; - int nblades; + int uvhub; + int pnode; + int nuvhubs; int cur_cpu; + int vector; + unsigned long mmr; if (!is_uv_system()) return 0; + if (nobau) + return 0; + for_each_possible_cpu(cur_cpu) zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), GFP_KERNEL, cpu_to_node(cur_cpu)); - uv_bau_retry_limit = 1; + uv_nshift = uv_hub_info->m_val; uv_mmask = (1UL << uv_hub_info->m_val) - 1; - nblades = uv_num_possible_blades(); + nuvhubs = uv_num_possible_blades(); + spin_lock_init(&disable_lock); + congested_cycles = microsec_2_cycles(congested_response_us); - uv_bau_table_bases = (struct bau_control **) - kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); - BUG_ON(!uv_bau_table_bases); + uv_init_per_cpu(nuvhubs); uv_partition_base_pnode = 0x7fffffff; - for (blade = 0; blade < nblades; blade++) - if (uv_blade_nr_possible_cpus(blade) && - (uv_blade_to_pnode(blade) < uv_partition_base_pnode)) - uv_partition_base_pnode = uv_blade_to_pnode(blade); - for (blade = 0; blade < nblades; blade++) - if (uv_blade_nr_possible_cpus(blade)) - uv_init_blade(blade); + for (uvhub = 0; uvhub < nuvhubs; uvhub++) + if (uv_blade_nr_possible_cpus(uvhub) && + (uv_blade_to_pnode(uvhub) < uv_partition_base_pnode)) + uv_partition_base_pnode = uv_blade_to_pnode(uvhub); + + vector = UV_BAU_MESSAGE; + for_each_possible_blade(uvhub) + if (uv_blade_nr_possible_cpus(uvhub)) + uv_init_uvhub(uvhub, vector); - alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); uv_enable_timeouts(); + alloc_intr_gate(vector, uv_bau_message_intr1); + + for_each_possible_blade(uvhub) { + pnode = uv_blade_to_pnode(uvhub); + /* INIT the bau */ + uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL, + ((unsigned long)1 << 63)); + mmr = 1; /* should be 1 to broadcast to both sockets */ + uv_write_global_mmr64(pnode, UVH_BAU_DATA_BROADCAST, mmr); + } return 0; } -__initcall(uv_bau_init); -__initcall(uv_ptc_init); +core_initcall(uv_bau_init); +fs_initcall(uv_ptc_init);