Applied "regulator: 88pm800: Remove owner" to the regulator tree

[Mark Brown <broonie@kernel.org>]

The patch

   regulator: 88pm800: Remove owner

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From f44ca44b14d697a047b7c1b32b29a1d9881f050f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@kernel.org>
Date: Thu, 16 Jul 2015 22:17:32 +0100
Subject: [PATCH] regulator: 88pm800: Remove owner

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/88pm800.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
index e846e4c..1b3b3a1 100644
--- a/drivers/regulator/88pm800.c
+++ b/drivers/regulator/88pm800.c
@@ -103,7 +103,6 @@ struct pm800_regulators {
 		.ops			= &pm800_volt_range_ops,	\
 		.type			= REGULATOR_VOLTAGE,		\
 		.id			= PM800_ID_##vreg,		\
-		.owner			= THIS_MODULE,			\
 		.n_voltages		= n_volt,			\
 		.linear_ranges		= volt_ranges,			\
 		.n_linear_ranges	= ARRAY_SIZE(volt_ranges),	\
@@ -133,7 +132,6 @@ struct pm800_regulators {
 		.ops			= &pm800_volt_table_ops,	\
 		.type			= REGULATOR_VOLTAGE,		\
 		.id			= PM800_ID_##vreg,		\
-		.owner			= THIS_MODULE,			\
 		.n_voltages		= ARRAY_SIZE(ldo_volt_table),	\
 		.vsel_reg		= PM800_##vreg##_VOUT,		\
 		.vsel_mask		= 0x1f,				\
-- 
2.1.4