From: Russell King <rmk+kernel@arm.linux.org.uk>
To: linux-rockchip@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
Andy Yan <andy.yan@rock-chips.com>,
Yakir Yang <ykk@rock-chips.com>,
Fabio Estevam <fabio.estevam@freescale.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Jon Nettleton <jon.nettleton@gmail.com>
Subject: [PATCH 04/12] gpu: imx: fix support for interlaced modes
Date: Sat, 08 Aug 2015 17:03:40 +0100 [thread overview]
Message-ID: <E1ZO6ay-0002qh-6E@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20150808160251.GM7557@n2100.arm.linux.org.uk>
The support for interlaced video modes seems to be broken; we don't use
anything other than the vtotal/htotal from the timing information to
define the various sync counters.
Freescale patches for interlaced video support contain an alternative
sync counter setup, which we include here. This setup produces the
hsync and vsync via the normal counter 2 and 3, but moves the display
enable signal from counter 5 to counter 6. Therefore, we need to
change the display controller setup as well.
The corresponding Freescale patches for this change are:
iMX6-HDMI-support-interlaced-display-mode.patch
IPU-fine-tuning-the-interlace-display-timing-for-CEA.patch
This produces a working interlace format output from the IPU.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/gpu/ipu-v3/ipu-dc.c | 18 ++++++++---
drivers/gpu/ipu-v3/ipu-di.c | 79 +++++++++++++++++++++------------------------
2 files changed, 51 insertions(+), 46 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-dc.c b/drivers/gpu/ipu-v3/ipu-dc.c
index 9ef2e1f54ca4..aa560855c1dc 100644
--- a/drivers/gpu/ipu-v3/ipu-dc.c
+++ b/drivers/gpu/ipu-v3/ipu-dc.c
@@ -183,12 +183,22 @@ int ipu_dc_init_sync(struct ipu_dc *dc, struct ipu_di *di, bool interlaced,
}
if (interlaced) {
- dc_link_event(dc, DC_EVT_NL, 0, 3);
- dc_link_event(dc, DC_EVT_EOL, 0, 2);
- dc_link_event(dc, DC_EVT_NEW_DATA, 0, 1);
+ int word, addr;
+
+ if (dc->di) {
+ addr = 1;
+ word = 1;
+ } else {
+ addr = 0;
+ word = 0;
+ }
+
+ dc_link_event(dc, DC_EVT_NL, addr, 3);
+ dc_link_event(dc, DC_EVT_EOL, addr, 2);
+ dc_link_event(dc, DC_EVT_NEW_DATA, addr, 1);
/* Init template microcode */
- dc_write_tmpl(dc, 0, WROD(0), 0, map, SYNC_WAVE, 0, 8, 1);
+ dc_write_tmpl(dc, word, WROD(0), 0, map, SYNC_WAVE, 0, 6, 1);
} else {
if (dc->di) {
dc_link_event(dc, DC_EVT_NL, 2, 3);
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index a96991c5c15f..359268e3a166 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -71,6 +71,10 @@ enum di_sync_wave {
DI_SYNC_HSYNC = 3,
DI_SYNC_VSYNC = 4,
DI_SYNC_DE = 6,
+
+ DI_SYNC_CNT1 = 2, /* counter >= 2 only */
+ DI_SYNC_CNT4 = 5, /* counter >= 5 only */
+ DI_SYNC_CNT5 = 6, /* counter >= 6 only */
};
#define SYNC_WAVE 0
@@ -211,66 +215,59 @@ static void ipu_di_sync_config_interlaced(struct ipu_di *di,
sig->mode.hback_porch + sig->mode.hfront_porch;
u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
sig->mode.vback_porch + sig->mode.vfront_porch;
- u32 reg;
struct di_sync_config cfg[] = {
{
- .run_count = h_total / 2 - 1,
- .run_src = DI_SYNC_CLK,
+ /* 1: internal VSYNC for each frame */
+ .run_count = v_total * 2 - 1,
+ .run_src = 3, /* == counter 7 */
}, {
- .run_count = h_total - 11,
+ /* PIN2: HSYNC waveform */
+ .run_count = h_total - 1,
.run_src = DI_SYNC_CLK,
- .cnt_down = 4,
+ .cnt_polarity_gen_en = 1,
+ .cnt_polarity_trigger_src = DI_SYNC_CLK,
+ .cnt_down = sig->mode.hsync_len * 2,
}, {
- .run_count = v_total * 2 - 1,
- .run_src = DI_SYNC_INT_HSYNC,
- .offset_count = 1,
- .offset_src = DI_SYNC_INT_HSYNC,
- .cnt_down = 4,
+ /* PIN3: VSYNC waveform */
+ .run_count = v_total - 1,
+ .run_src = 4, /* == counter 7 */
+ .cnt_polarity_gen_en = 1,
+ .cnt_polarity_trigger_src = 4, /* == counter 7 */
+ .cnt_down = sig->mode.vsync_len * 2,
+ .cnt_clr_src = DI_SYNC_CNT1,
}, {
- .run_count = v_total / 2 - 1,
+ /* 4: Field */
+ .run_count = v_total / 2,
.run_src = DI_SYNC_HSYNC,
- .offset_count = sig->mode.vback_porch,
- .offset_src = DI_SYNC_HSYNC,
+ .offset_count = h_total / 2,
+ .offset_src = DI_SYNC_CLK,
.repeat_count = 2,
- .cnt_clr_src = DI_SYNC_VSYNC,
+ .cnt_clr_src = DI_SYNC_CNT1,
}, {
+ /* 5: Active lines */
.run_src = DI_SYNC_HSYNC,
- .repeat_count = sig->mode.vactive / 2,
- .cnt_clr_src = 4,
- }, {
- .run_count = v_total - 1,
- .run_src = DI_SYNC_HSYNC,
- }, {
- .run_count = v_total / 2 - 1,
- .run_src = DI_SYNC_HSYNC,
- .offset_count = 9,
+ .offset_count = (sig->mode.vsync_len +
+ sig->mode.vback_porch) / 2,
.offset_src = DI_SYNC_HSYNC,
- .repeat_count = 2,
- .cnt_clr_src = DI_SYNC_VSYNC,
+ .repeat_count = sig->mode.vactive / 2,
+ .cnt_clr_src = DI_SYNC_CNT4,
}, {
+ /* 6: Active pixel, referenced by DC */
.run_src = DI_SYNC_CLK,
- .offset_count = sig->mode.hback_porch,
+ .offset_count = sig->mode.hsync_len +
+ sig->mode.hback_porch,
.offset_src = DI_SYNC_CLK,
.repeat_count = sig->mode.hactive,
- .cnt_clr_src = 5,
+ .cnt_clr_src = DI_SYNC_CNT5,
}, {
- .run_count = v_total - 1,
- .run_src = DI_SYNC_INT_HSYNC,
- .offset_count = v_total / 2,
- .offset_src = DI_SYNC_INT_HSYNC,
- .cnt_clr_src = DI_SYNC_HSYNC,
- .cnt_down = 4,
+ /* 7: Half line HSYNC */
+ .run_count = h_total / 2 - 1,
+ .run_src = DI_SYNC_CLK,
}
};
ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
- /* set gentime select and tag sel */
- reg = ipu_di_read(di, DI_SW_GEN1(9));
- reg &= 0x1FFFFFFF;
- reg |= (3 - 1) << 29 | 0x00008000;
- ipu_di_write(di, reg, DI_SW_GEN1(9));
-
ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
}
@@ -605,10 +602,8 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
/* set y_sel = 1 */
di_gen |= 0x10000000;
- di_gen |= DI_GEN_POLARITY_5;
- di_gen |= DI_GEN_POLARITY_8;
- vsync_cnt = 7;
+ vsync_cnt = 3;
} else {
ipu_di_sync_config_noninterlaced(di, sig, div);
--
2.1.0
next prev parent reply other threads:[~2015-08-08 16:03 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-08 16:02 [PATCH 00/12] dw-hdmi development Russell King - ARM Linux
2015-08-08 16:03 ` [PATCH 01/12] drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs Russell King
2015-08-08 16:03 ` [PATCH 02/12] drm: bridge/dw_hdmi: don't support any pixel doubled modes Russell King
2015-08-08 16:03 ` [PATCH 03/12] gpu: imx: simplify sync polarity setting Russell King
2015-10-06 17:57 ` Fabio Estevam
2015-08-08 16:03 ` Russell King [this message]
2015-08-27 8:39 ` [PATCH 04/12] gpu: imx: fix support for interlaced modes Philipp Zabel
2015-08-27 8:54 ` Russell King - ARM Linux
2015-08-27 9:40 ` Philipp Zabel
2015-10-06 17:59 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 05/12] drm: bridge/dw_hdmi: add support for interlaced video modes Russell King
2015-10-06 18:00 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 06/12] drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling Russell King
2015-10-07 3:40 ` Yakir Yang
2015-08-08 16:03 ` [PATCH 07/12] drm: bridge/dw_hdmi: enable audio only if sink supports audio Russell King
2015-10-07 3:42 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 08/12] drm: bridge/dw_hdmi: avoid enabling interface in mode_set Russell King
2015-10-07 3:50 ` Yakir Yang
2015-10-07 9:18 ` Russell King - ARM Linux
2015-10-07 9:35 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 09/12] drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power() Russell King
2015-08-08 16:04 ` [PATCH 10/12] drm: bridge/dw_hdmi: fix phy enable/disable handling Russell King
[not found] ` <56149A11.4070102@rock-chips.com>
2015-10-07 9:48 ` Russell King - ARM Linux
[not found] ` <5614F68B.6050808@rock-chips.com>
2015-10-07 19:17 ` Russell King - ARM Linux
2015-10-08 8:35 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 11/12] drm: bridge/dw_hdmi: add connector mode forcing Russell King
2015-10-06 18:01 ` Fabio Estevam
2015-08-08 16:04 ` [PATCH 12/12] drm: bridge/dw_hdmi: improve HDMI enable/disable handling Russell King
2015-10-06 18:03 ` Fabio Estevam
2015-08-08 16:09 ` [PATCH 0/9] dw-hdmi audio support Russell King - ARM Linux
2015-08-08 16:10 ` [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-10 10:05 ` Takashi Iwai
2015-08-10 10:39 ` Russell King - ARM Linux
2015-08-10 12:23 ` Takashi Iwai
2015-08-10 16:49 ` Russell King - ARM Linux
2015-08-10 18:16 ` Mark Brown
2015-08-14 13:54 ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver David Airlie <airlied@linux.ie>, Sascha Hauer <s.hauer@pengutronix.de>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Jaroslav Kysela <perex@perex.cz>, linux-rockchip@lists.infradead.org, Mark Brown <broonie@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de>, Yakir Yang <ykk@rock-chips.com>, Andy Yan <andy.yan@rock-chips.com>, Jon Nettleton <jon.nettleton@gmail.com>, linux-arm-kernel@lists.infradead.org Russell King
2015-08-14 14:04 ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-14 14:34 ` [alsa-devel] " Takashi Iwai
2015-10-06 18:07 ` [PATCH " Fabio Estevam
2015-10-06 18:18 ` Russell King - ARM Linux
2015-10-06 18:45 ` Fabio Estevam
2015-10-06 18:54 ` Russell King - ARM Linux
2015-10-06 20:25 ` Fabio Estevam
2015-10-09 16:00 ` Russell King - ARM Linux
2015-10-09 16:02 ` Fabio Estevam
2015-10-09 16:11 ` Russell King - ARM Linux
2015-08-08 16:10 ` [PATCH 2/9] drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver Russell King
2015-08-08 16:10 ` [PATCH 3/9] drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio Russell King
2015-08-08 16:10 ` [PATCH 4/9] drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes Russell King
2015-08-08 16:10 ` [PATCH 5/9] drm: bridge/dw_hdmi: avoid being recursive in N calculation Russell King
2015-09-04 17:50 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 6/9] drm: bridge/dw_hdmi: adjust pixel clock values " Russell King
2015-09-04 18:21 ` Doug Anderson
2015-09-04 19:48 ` Doug Anderson
2015-09-04 21:24 ` Russell King - ARM Linux
2015-09-04 23:50 ` Doug Anderson
2015-09-05 0:27 ` Russell King - ARM Linux
2015-09-05 2:03 ` Doug Anderson
2015-09-05 8:31 ` Russell King - ARM Linux
2015-09-05 13:46 ` Doug Anderson
2015-09-05 14:01 ` Russell King - ARM Linux
2015-09-05 19:44 ` Doug Anderson
2015-09-05 8:34 ` Russell King - ARM Linux
2015-09-05 13:50 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code Russell King
2015-09-04 18:24 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 8/9] drm: bridge/dw_hdmi: replace CTS calculation for the ACR Russell King
2015-09-04 20:00 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 9/9] drm: bridge/dw_hdmi-i2s-audio: add audio driver Russell King
2015-08-10 15:48 ` Russell King - ARM Linux
2015-08-10 16:26 ` Yakir Yang
2015-08-27 8:42 ` [PATCH 0/9] dw-hdmi audio support Philipp Zabel
2016-01-05 15:40 ` [alsa-devel] " Jean-Michel Hautbois
2016-01-05 15:54 ` Fabio Estevam
2016-01-05 16:04 ` Russell King - ARM Linux
2016-01-07 8:21 ` Jean-Michel Hautbois
2015-08-10 12:21 ` [PATCH 00/12] dw-hdmi development Thierry Reding
2015-08-18 10:37 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1ZO6ay-0002qh-6E@rmk-PC.arm.linux.org.uk \
--to=rmk+kernel@arm.linux.org.uk \
--cc=andy.yan@rock-chips.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@freescale.com \
--cc=jon.nettleton@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=s.hauer@pengutronix.de \
--cc=ykk@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®