From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760759AbcCEM0I (ORCPT ); Sat, 5 Mar 2016 07:26:08 -0500 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:35332 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753775AbcCEMZz (ORCPT ); Sat, 5 Mar 2016 07:25:55 -0500 From: Mark Brown To: Laxman Dewangan , Mark Brown Cc: linux-kernel@vger.kernel.org In-Reply-To: Message-Id: Date: Sat, 05 Mar 2016 21:25:49 +0900 X-SA-Exim-Connect-IP: 110.170.137.3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: max8973: add DT binding details for junction warn temp" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on mezzanine.sirena.org.uk) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: max8973: add DT binding details for junction warn temp has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 3c0ff151c56eb47792f39da2454c400f55fc005b Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 4 Mar 2016 15:57:53 +0530 Subject: [PATCH] regulator: max8973: add DT binding details for junction warn temp The driver MAX8973 supports the driver for Maxim MAX77621. MAX77621 supports the junction temp warning at 120 degC and 140 degC which is configurable. It generates alert signal when junction temperature crosses these threshold. Add DT properties and its binding details to make this configuration from DT. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/max8973-regulator.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt index f80ea2fe27e6..c2c68fcc1b41 100644 --- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt @@ -32,6 +32,13 @@ Optional properties: Enhanced transient response (ETR) will affect the configuration of CKADV. +-junction-warn-millicelsius: u32, junction warning temperature threshold + in millicelsius. If die temperature crosses this level then + device generates the warning interrupts. + +Please note that thermal functionality is only supported on MAX77621. The +supported threshold warning temperature for MAX77621 are 120 degC and 140 degC. + Example: max8973@1b { -- 2.7.0