Applied "regulator: qcom_smd: add list_voltage callback" to the regulator tree

[Mark Brown <broonie@kernel.org>]

The patch

   regulator: qcom_smd: add list_voltage callback

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 3bfbb4d1a480cc17f6ccfce13b76eb6c0dbeaf8c Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Thu, 2 Jun 2016 11:23:15 +0100
Subject: [PATCH] regulator: qcom_smd: add list_voltage callback

This patch adds support to list_voltage callback, so that consumers
like mmc core, can get information of supported voltage range.

Without this patch there is no way for mmc core to know this voltage range.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/qcom_smd-regulator.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 6c7fe4778793..526bf23dcb49 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -152,6 +152,7 @@ static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
 	.enable = rpm_reg_enable,
 	.disable = rpm_reg_disable,
 	.is_enabled = rpm_reg_is_enabled,
+	.list_voltage = regulator_list_voltage_linear_range,
 
 	.get_voltage = rpm_reg_get_voltage,
 	.set_voltage = rpm_reg_set_voltage,
-- 
2.8.1