From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753360AbdBDMNa (ORCPT ); Sat, 4 Feb 2017 07:13:30 -0500 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:35692 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752261AbdBDMN2 (ORCPT ); Sat, 4 Feb 2017 07:13:28 -0500 From: Mark Brown To: Hans Holmberg Cc: Mark Brown , broonie@linaro.org, mark.rutland@arm.com, robh+dt@kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Laxman Dewangan , linux-kernel@vger.kernel.org In-Reply-To: <1402051397-5689-1-git-send-email-ldewangan@nvidia.com> Message-Id: Date: Sat, 04 Feb 2017 13:13:13 +0100 X-SA-Exim-Connect-IP: 2001:67c:1810:f051:e387:5dab:49ba:da3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: gpio: correct default type" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: No (on mezzanine.sirena.org.uk); Unknown failure Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: gpio: correct default type has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 17db9f386632c9c9182a3318b89b742be08c1c2a Mon Sep 17 00:00:00 2001 From: Hans Holmberg Date: Fri, 3 Feb 2017 15:29:12 +0100 Subject: [PATCH] regulator: gpio: correct default type The driver defaults to voltage, not current, type so correct this in the device tree binding documentation. Signed-off-by: Hans Holmberg Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index e5cac1e0ca8a..dd1ed789728e 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -13,7 +13,7 @@ Optional properties: - startup-delay-us : Startup time in microseconds. - enable-active-high : Polarity of GPIO is active high (default is low). - regulator-type : Specifies what is being regulated, must be either - "voltage" or "current", defaults to current. + "voltage" or "current", defaults to voltage. Any property defined as part of the core regulator binding defined in regulator.txt can also be used. -- 2.11.0