From: Mark Brown <broonie@kernel.org>
To: Marek Vasut <marek.vasut@gmail.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-renesas-soc@vger.kernel.org,
Marek Vasut <marek.vasut+renesas@gmail.com>,
linux-kernel@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-kernel@vger.kernel.org
Subject: Applied "regulator: Add ROHM BD9571MWV-M PMIC regulator driver" to the regulator tree
Date: Tue, 25 Apr 2017 16:45:56 +0100 [thread overview]
Message-ID: <E1d32f6-0001n5-5D@debutante> (raw)
In-Reply-To: <20170424152130.32410-4-marek.vasut+renesas@gmail.com>
The patch
regulator: Add ROHM BD9571MWV-M PMIC regulator driver
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From e85c5a153fe237f261838fc9638c28f19e0f27c1 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Mon, 24 Apr 2017 17:21:30 +0200
Subject: [PATCH] regulator: Add ROHM BD9571MWV-M PMIC regulator driver
Add driver for the regulator block in the ROHM BD9571MWV-W MFD PMIC.
This block supports three voltage monitors, VD18, VD25, VD33 for the
1V8, 2V5, 3V3 voltage rails and a single voltage regulator for the
DVFS rail.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/Kconfig | 11 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/bd9571mwv-regulator.c | 178 ++++++++++++++++++++++++++++++++
3 files changed, 190 insertions(+)
create mode 100644 drivers/regulator/bd9571mwv-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index be06eb29c681..a27b97c5695b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -163,6 +163,17 @@ config REGULATOR_BCM590XX
BCM590xx PMUs. This will enable support for the software
controllable LDO/Switching regulators.
+config REGULATOR_BD9571MWV
+ tristate "ROHM BD9571MWV Regulators"
+ depends on MFD_BD9571MWV
+ help
+ This driver provides support for the voltage regulators on the
+ ROHM BD9571MWV PMIC. This will enable support for the software
+ controllable regulator and voltage sampling units.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd9571mwv-regulator.
+
config REGULATOR_CPCAP
tristate "Motorola CPCAP regulator"
depends on MFD_CPCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ef7725e2592a..439b9b21f2fe 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
+obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
new file mode 100644
index 000000000000..8ba206fec31e
--- /dev/null
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -0,0 +1,178 @@
+/*
+ * ROHM BD9571MWV-M regulator driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65086 driver
+ *
+ * NOTE: VD09 is missing
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/bd9571mwv.h>
+
+enum bd9571mwv_regulators { VD09, VD18, VD25, VD33, DVFS };
+
+#define BD9571MWV_REG(_name, _of, _id, _ops, _vr, _vm, _nv, _min, _step, _lmin)\
+ { \
+ .name = _name, \
+ .of_match = of_match_ptr(_of), \
+ .regulators_node = "regulators", \
+ .id = _id, \
+ .ops = &_ops, \
+ .n_voltages = _nv, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .vsel_reg = _vr, \
+ .vsel_mask = _vm, \
+ .min_uV = _min, \
+ .uV_step = _step, \
+ .linear_min_sel = _lmin, \
+ }
+
+int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, BD9571MWV_AVS_SET_MONI, &val);
+ if (ret != 0)
+ return ret;
+
+ return val & BD9571MWV_AVS_SET_MONI_MASK;
+}
+
+int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ int ret;
+
+ ret = bd9571mwv_avs_get_moni_state(rdev);
+ if (ret < 0)
+ return ret;
+
+ return regmap_write_bits(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret),
+ rdev->desc->vsel_mask, sel);
+}
+
+int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = bd9571mwv_avs_get_moni_state(rdev);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret), &val);
+ if (ret != 0)
+ return ret;
+
+ val &= rdev->desc->vsel_mask;
+ val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+ return val;
+}
+
+int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ return regmap_write_bits(rdev->regmap, BD9571MWV_DVFS_SETVID,
+ rdev->desc->vsel_mask, sel);
+}
+
+/* Operations permitted on AVS voltage regulator */
+static struct regulator_ops avs_ops = {
+ .set_voltage_sel = bd9571mwv_avs_set_voltage_sel_regmap,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = bd9571mwv_avs_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+/* Operations permitted on voltage regulators */
+static struct regulator_ops reg_ops = {
+ .set_voltage_sel = bd9571mwv_reg_set_voltage_sel_regmap,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+/* Operations permitted on voltage monitors */
+static struct regulator_ops vid_ops = {
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_desc regulators[] = {
+ BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f,
+ 0x80, 600000, 10000, 0x3c),
+ BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf,
+ 16, 1625000, 25000, 0),
+ BD9571MWV_REG("VD25", "vd25", VD25, vid_ops, BD9571MWV_VD25_VID, 0xf,
+ 16, 2150000, 50000, 0),
+ BD9571MWV_REG("VD33", "vd33", VD33, vid_ops, BD9571MWV_VD33_VID, 0xf,
+ 11, 2800000, 100000, 0),
+ BD9571MWV_REG("DVFS", "dvfs", DVFS, reg_ops,
+ BD9571MWV_DVFS_MONIVDAC, 0x7f,
+ 0x80, 600000, 10000, 0x3c),
+};
+
+static int bd9571mwv_regulator_probe(struct platform_device *pdev)
+{
+ struct bd9571mwv *bd = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ int i;
+
+ platform_set_drvdata(pdev, bd);
+
+ config.dev = &pdev->dev;
+ config.dev->of_node = bd->dev->of_node;
+ config.driver_data = bd;
+ config.regmap = bd->regmap;
+
+ for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+ rdev = devm_regulator_register(&pdev->dev, ®ulators[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(bd->dev, "failed to register %s regulator\n",
+ pdev->name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id bd9571mwv_regulator_id_table[] = {
+ { "bd9571mwv-regulator", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, bd9571mwv_regulator_id_table);
+
+static struct platform_driver bd9571mwv_regulator_driver = {
+ .driver = {
+ .name = "bd9571mwv-regulator",
+ },
+ .probe = bd9571mwv_regulator_probe,
+ .id_table = bd9571mwv_regulator_id_table,
+};
+module_platform_driver(bd9571mwv_regulator_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>");
+MODULE_DESCRIPTION("BD9571MWV Regulator driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0
prev parent reply other threads:[~2017-04-25 15:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20170424152130.32410-1-marek.vasut+renesas@gmail.com>
2017-04-24 15:21 ` [PATCH V2 2/4] mfd: Add ROHM BD9571MWV-M MFD PMIC driver Marek Vasut
2017-04-24 15:21 ` [PATCH V2 4/4] regulator: Add ROHM BD9571MWV-M PMIC regulator driver Marek Vasut
2017-04-25 15:45 ` Mark Brown [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1d32f6-0001n5-5D@debutante \
--to=broonie@kernel.org \
--cc=geert+renesas@glider.be \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=marek.vasut+renesas@gmail.com \
--cc=marek.vasut@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®