[PATCH v3 2/2] USB: uas: Implement the new shutdown callback

[Aditya Garg <gargaditya08@live.com>]

From: Kerem Karabay <kekrby@gmail.com>

A standard implementation of shutdown callback has been implemented
for USB drivers. Since the UAS driver implements a shutdown callback
this patch enables it to use the new standard implementation.

Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
---
 drivers/usb/storage/uas.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index b610a2de4..0cdbcf825 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -1232,9 +1232,8 @@ static void uas_disconnect(struct usb_interface *intf)
  * hang on reboot when the device is still in uas mode. Note the reset is
  * necessary as some devices won't revert to usb-storage mode without it.
  */
-static void uas_shutdown(struct device *dev)
+static void uas_shutdown(struct usb_interface *intf)
 {
-	struct usb_interface *intf = to_usb_interface(dev);
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
@@ -1257,7 +1256,7 @@ static struct usb_driver uas_driver = {
 	.suspend = uas_suspend,
 	.resume = uas_resume,
 	.reset_resume = uas_reset_resume,
-	.driver.shutdown = uas_shutdown,
+	.shutdown = uas_shutdown,
 	.id_table = uas_usb_ids,
 };
 
-- 
2.43.0