From: <Greg.Chandler@wellsfargo.com>
To: <dtor@insightbb.com>
Cc: <linux-kernel@vger.kernel.org>,
<linux-input@atrey.karlin.mff.cuni.cz>,
<andi@rhlx01.fht-esslingen.de>
Subject: RE: Touchscreen hardware hacking/driver hacking.
Date: Tue, 17 Oct 2006 16:28:39 -0500 [thread overview]
Message-ID: <E8C008223DD5F64485DFBDF6D4B7F71D020C5EB1@msgswbmnmsp25.wellsfargo.com> (raw)
In my many rounds of research on this, I'm pretty sure that this is the
same setup as the lifebook.
Wether the implementation is the same, is a matter of conjecture as long
as I can't see the device.
Both of you suggested checking the PS/2 under windows, unfortunatly I
know of no "sniffer" type drivers or apps
to listen directly on a logical PS/2 interface. If you know where I can
find something like that that would be of more help than anything at
this point.
-----Original Message-----
From: dmitry.torokhov@gmail.com [mailto:dmitry.torokhov@gmail.com] On
Behalf Of Dmitry Torokhov
Sent: Tuesday, October 17, 2006 4:12 PM
To: Chandler, Greg
Cc: linux-kernel@vger.kernel.org; linux-input@atrey.karlin.mff.cuni.cz
Subject: Re: Touchscreen hardware hacking/driver hacking.
On 10/17/06, Greg.Chandler@wellsfargo.com <Greg.Chandler@wellsfargo.com>
wrote:
>
> I'm working on a prototype Hitachi tablet, it uses a Fujitsu 4-wire
> resistive touchscreen. {10.4" I think} I've found that windows-xp
> embedded uses a generic ps/2 driver for the device.
>
> I've ripped this thing to pieces on several occasions looking for
> chips to help the porting, my problem is that I can not find the
> analog-digital converter for this thing. The connector goes to a
> surface mount header on an 8 layer board.
> I loose the traces almost instantly. Given that I can't find the
> converter anywhere what should I do next?
>
> I've done my homework and found that this HAS to be either serial or
> usb attached according to Fujitsu.
> Aparently it's neither. There are no unknown USB devices {or known
> matching}, and there is no activity on the single serial port on the
> system. Since the windows driver uses PS/2 as the interface I have a
> horrible feeling this thing has an interpretation layer that makes it
> a
> PS/2 mouse, and that may or may not royally be a nightmare.
>
The touchscreen might need a "magic knock" to activate. You might try to
see what data wondows driver sends to PS/2 port.
Also check of Lifebook touchscreen protocol will work for you. You will
need to adjust DMI table in drivers/input/mouse/lifebook.c/
> I would have posted this to a different group but there is no "input"
> mailing list.
>
linux-input@atrey.karlin.mff.cuni.cz
But you must be subscribed to post otherwise list just drops your mails
on the floor.
--
Dmitry
next reply other threads:[~2006-10-17 21:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-17 21:28 Greg.Chandler [this message]
2006-10-18 2:14 ` Lee Revell
-- strict thread matches above, loose matches on Subject: below --
2006-10-25 20:08 Greg.Chandler
2006-10-25 20:55 ` Dmitry Torokhov
2006-10-26 8:48 ` Matthew Garrett
2006-10-26 16:29 ` Dmitry Torokhov
2006-10-26 22:47 ` Matthew Garrett
2006-10-18 18:45 Greg.Chandler
2006-10-17 22:48 Greg Chandler
2006-10-18 2:30 ` Greg Chandler
2006-10-18 3:42 ` Kyle Moffett
2006-10-17 21:46 Greg.Chandler
2006-10-17 20:30 Greg.Chandler
2006-10-17 21:05 ` Andreas Mohr
2006-10-17 21:12 ` Dmitry Torokhov
2006-10-18 7:39 ` Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E8C008223DD5F64485DFBDF6D4B7F71D020C5EB1@msgswbmnmsp25.wellsfargo.com \
--to=greg.chandler@wellsfargo.com \
--cc=andi@rhlx01.fht-esslingen.de \
--cc=dtor@insightbb.com \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®