mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ofer Fryman <ofer@shunra.co.il>
To: "'Hen, Shmulik'" <shmulik.hen@intel.com>
Cc: linux-kernel@vger.kernel.org
Subject: RE: spinlock help
Date: Wed, 7 Mar 2001 12:31:07 +0200	[thread overview]
Message-ID: <F1629832DE36D411858F00C04F24847A11DEF6@SALVADOR> (raw)

Did you try looking at Becker eepro100 driver it seems to be simple, no
unnecessary spin_lock_irqsave?.

-----Original Message-----
From: Hen, Shmulik [mailto:shmulik.hen@intel.com]
Sent: Wednesday, March 07, 2001 11:21 AM
To: 'nigel@nrg.org'; Manoj Sontakke
Cc: linux-kernel@vger.kernel.org
Subject: RE: spinlock help


How about if the same sequence occurred, but from two different drivers ?

We've had some bad experience with this stuff. Our driver, which acts as an
intermediate net driver, would call the hard_start_xmit in the base driver.
The base driver, wanting to block receive interrupts would issue a
'spin_lock_irqsave(a,b)' and process the packet. If the TX queue is full, it
could call an indication entry point in our intermediate driver to signal it
to stop sending more packets. Since our indication function handles many
types of indications but can process them only one at a time, we wanted to
block other indications while queuing the request.

The whole sequence would look like that:

[our driver]
	ans_send() {
		.
		.
		e100_hard_start_xmit(dev, skb);
		.
		.
	}

[e100.o]
	e100_hard_start_xmit() {
		.
		.
		spin_lock_irqsave(a,b);
		.
		.
		if(tx_queue_full)
			ans_notify(TX_QUEUE_FULL);	<--
		.
		.
		spin_unlock_irqrestore(a,b);
	}
	
[our driver]
	ans_notify() {
		.
		.
		spin_lock_irqsave(c,d);
		queue_request(req_type);
		spin_unlock_irqrestore(c,d);	<--
		.
		.
	}

At that point, for some reason, interrupts were back and the e100.o would
hang in an infinite loop (we verified it on kernel 2.4.0-test10 +kdb that
the processor was enabling interrupts and that the e100_isr was called for
processing an Rx int.).

How is that possible that a 'spin_unlock_irqrestore(c,d)' would also restore
what should have been restored only with a 'spin_unlock_irqrestore(a,b)' ?


	Thanks in advance,
	Shmulik Hen      
      Software Engineer
	Linux Advanced Networking Services
	Intel Network Communications Group
	Jerusalem, Israel.

-----Original Message-----
From: Nigel Gamble [mailto:nigel@nrg.org]
Sent: Wednesday, March 07, 2001 1:54 AM
To: Manoj Sontakke
Cc: linux-kernel@vger.kernel.org
Subject: Re: spinlock help


On Tue, 6 Mar 2001, Manoj Sontakke wrote:
> 1. when spin_lock_irqsave() function is called the subsequent code is
> executed untill spin_unloc_irqrestore()is called. is this right?

Yes.  The protected code will not be interrupted, or simultaneously
executed by another CPU.

> 2. is this sequence valid?
> 	spin_lock_irqsave(a,b);
> 	spin_lock_irqsave(c,d);

Yes, as long as it is followed by:

	spin_unlock_irqrestore(c, d);
	spin_unlock_irqrestore(a, b);

Nigel Gamble                                    nigel@nrg.org
Mountain View, CA, USA.                         http://www.nrg.org/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

             reply	other threads:[~2001-03-07 10:27 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-03-07 10:31 Ofer Fryman [this message]
  -- strict thread matches above, loose matches on Subject: below --
2001-03-08 11:07 Hen, Shmulik
2001-03-08 11:34 ` Andrew Morton
2001-03-07 16:54 Ofer Fryman
2001-03-07 12:26 Hen, Shmulik
2001-03-07 12:53 ` Andrew Morton
2001-03-07 10:46 Hen, Shmulik
2001-03-07 10:44 Hen, Shmulik
2001-03-07 13:19 ` Alan Cox
2001-03-07  9:21 Hen, Shmulik
2001-03-07 10:26 ` Manoj Sontakke
2001-03-06 14:05 Manoj Sontakke
2001-03-06 23:53 ` Nigel Gamble

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=F1629832DE36D411858F00C04F24847A11DEF6@SALVADOR \
    --to=ofer@shunra.co.il \
    --cc=linux-kernel@vger.kernel.org \
    --cc=shmulik.hen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®