From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 10 Jan 2003 21:17:18 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 10 Jan 2003 21:17:18 -0500 Received: from f166.law14.hotmail.com ([64.4.21.166]:4623 "EHLO hotmail.com") by vger.kernel.org with ESMTP id ; Fri, 10 Jan 2003 21:17:18 -0500 X-Originating-IP: [200.226.148.147] From: "Adriano Carvalho" To: linux-kernel@vger.kernel.org Subject: Ethernet card doesnt work in 2.4.20 Date: Sat, 11 Jan 2003 00:24:37 -0200 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Message-ID: X-OriginalArrivalTime: 11 Jan 2003 02:24:38.0256 (UTC) FILETIME=[96F18700:01C2B918] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org -- I have a Compaq Laptop 1400 14xl244, with Modem HCF conexant , and ethernet card Conexant LANfinity. They are COMBO, and they use IRQ 11. When I startup module (tulip) for my ethernet card, its ok. But when I try send or receive anything, I dont get. PCMCIA card uses IRQ 11 too, so I get it out from kernel, but it doesnt solve. Here is my /proc/interrupts : 11: 20 XT-PIC hcf, eth0 this was after a time of try ping, and the number "20" after stays 1691, after 2000... Donald Becker (tulip developer) told me to send these lines : Compaq 12XL125 machine detected. Enabling interrupts during APM calls. ... Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! .. PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: Found IRQ 11 for device 00:0a.0 PCI: Sharing IRQ 11 with 00:09.0 PCI: Sharing IRQ 11 with 00:09.1 PCI: Disabling Via external APIC routing Thanks for all. Adriano Carvalho. _________________________________________________________________ MSN Messenger: converse com os seus amigos online. http://messenger.msn.com.br