From: Nadav Amit <namit@vmware.com>
To: Peter Zijlstra <peterz@infradead.org>, Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>, Ingo Molnar <mingo@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>, X86 ML <x86@kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Dave Hansen <dave.hansen@intel.com>
Subject: Re: [PATCH v2] x86/mm/tlb: Remove flush_tlb_info from the stack
Date: Thu, 25 Apr 2019 19:13:17 +0000 [thread overview]
Message-ID: <F2218F7E-2011-4AAA-B3A3-F13A1A438204@vmware.com> (raw)
In-Reply-To: <20190425180828.24959-1-namit@vmware.com>
> On Apr 25, 2019, at 11:08 AM, Nadav Amit <namit@vmware.com> wrote:
>
> Move flush_tlb_info variables off the stack. This allows to align
> flush_tlb_info to cache-line and avoid potentially unnecessary cache
> line movements. It also allows to have a fixed virtual-to-physical
> translation of the variables, which reduces TLB misses.
>
> Use per-CPU struct for flush_tlb_mm_range() and
> flush_tlb_kernel_range(). Add debug assertions to ensure there are
> no nested TLB flushes that might overwrite the per-CPU data. For
> arch_tlbbatch_flush() use a const struct.
>
> Results when running a microbenchmarks that performs 10^6 MADV_DONTEED
> operations and touching a page, in which 3 additional threads run a
> busy-wait loop (5 runs, PTI and retpolines are turned off):
>
> base off-stack
> ---- ---------
> avg (usec/op) 1.629 1.570 (-3%)
> stddev 0.014 0.009
>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Andy Lutomirski <luto@kernel.org>
> Cc: Dave Hansen <dave.hansen@intel.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Nadav Amit <namit@vmware.com>
>
> ---
>
> v1->v2:
> - Initialize all flush_tlb_info fields [Andy]
> ---
> arch/x86/mm/tlb.c | 100 ++++++++++++++++++++++++++++++++++------------
> 1 file changed, 74 insertions(+), 26 deletions(-)
>
> diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
> index 487b8474c01c..aac191eb2b90 100644
> --- a/arch/x86/mm/tlb.c
> +++ b/arch/x86/mm/tlb.c
> @@ -634,7 +634,7 @@ static void flush_tlb_func_common(const struct flush_tlb_info *f,
> this_cpu_write(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen, mm_tlb_gen);
> }
>
> -static void flush_tlb_func_local(void *info, enum tlb_flush_reason reason)
> +static void flush_tlb_func_local(const void *info, enum tlb_flush_reason reason)
> {
> const struct flush_tlb_info *f = info;
>
> @@ -722,43 +722,81 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
> */
> unsigned long tlb_single_page_flush_ceiling __read_mostly = 33;
>
> +static DEFINE_PER_CPU_SHARED_ALIGNED(struct flush_tlb_info, flush_tlb_info);
> +
> +#ifdef CONFIG_DEBUG_VM
> +static DEFINE_PER_CPU(unsigned int, flush_tlb_info_idx);
> +#endif
> +
> +static inline struct flush_tlb_info *get_flush_tlb_info(struct mm_struct *mm,
> + unsigned long start, unsigned long end,
> + unsigned int stride_shift, bool freed_tables,
> + u64 new_tlb_gen)
> +{
> + struct flush_tlb_info *info = this_cpu_ptr(&flush_tlb_info);
> +
> +#ifdef CONFIG_DEBUG_VM
> + /*
> + * Ensure that the following code is non-reentrant and flush_tlb_info
> + * is not overwritten. This means no TLB flushing is initiated by
> + * interrupt handlers and machine-check exception handlers.
> + */
> + BUG_ON(this_cpu_inc_return(flush_tlb_info_idx) != 1);
> +#endif
> +
> + info->start = start;
> + info->end = end;
> + info->mm = mm;
> + info->stride_shift = stride_shift;
> + info->freed_tables = freed_tables;
> + info->new_tlb_gen = new_tlb_gen;
> +
> + return info;
> +}
> +
> +static inline void put_flush_tlb_info(void)
> +{
> +#ifdef CONFIG_DEBUG_VM
> + /* Complete reentrency prevention checks */
> + barrier();
> + this_cpu_dec(flush_tlb_info_idx);
> +#endif
> +}
> +
> void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
> unsigned long end, unsigned int stride_shift,
> bool freed_tables)
> {
> + struct flush_tlb_info *info;
> + u64 new_tlb_gen;
> int cpu;
>
> - struct flush_tlb_info info = {
> - .mm = mm,
> - .stride_shift = stride_shift,
> - .freed_tables = freed_tables,
> - };
> -
> cpu = get_cpu();
>
> - /* This is also a barrier that synchronizes with switch_mm(). */
> - info.new_tlb_gen = inc_mm_tlb_gen(mm);
> -
> /* Should we flush just the requested range? */
> - if ((end != TLB_FLUSH_ALL) &&
> - ((end - start) >> stride_shift) <= tlb_single_page_flush_ceiling) {
> - info.start = start;
> - info.end = end;
> - } else {
> - info.start = 0UL;
> - info.end = TLB_FLUSH_ALL;
> + if ((end == TLB_FLUSH_ALL) ||
> + ((end - start) >> stride_shift) > tlb_single_page_flush_ceiling) {
> + start = 0UL;
> + end = TLB_FLUSH_ALL;
> }
>
> + /* This is also a barrier that synchronizes with switch_mm(). */
> + new_tlb_gen = inc_mm_tlb_gen(mm);
> +
> + info = get_flush_tlb_info(mm, start, end, stride_shift, freed_tables,
> + new_tlb_gen);
> +
> if (mm == this_cpu_read(cpu_tlbstate.loaded_mm)) {
> - VM_WARN_ON(irqs_disabled());
> + lockdep_assert_irqs_enabled();
> local_irq_disable();
> - flush_tlb_func_local(&info, TLB_LOCAL_MM_SHOOTDOWN);
> + flush_tlb_func_local(info, TLB_LOCAL_MM_SHOOTDOWN);
> local_irq_enable();
> }
>
> if (cpumask_any_but(mm_cpumask(mm), cpu) < nr_cpu_ids)
> - flush_tlb_others(mm_cpumask(mm), &info);
> + flush_tlb_others(mm_cpumask(mm), info);
>
> + put_flush_tlb_info();
> put_cpu();
> }
>
> @@ -787,22 +825,32 @@ static void do_kernel_range_flush(void *info)
>
> void flush_tlb_kernel_range(unsigned long start, unsigned long end)
> {
> -
> /* Balance as user space task's flush, a bit conservative */
> if (end == TLB_FLUSH_ALL ||
> (end - start) > tlb_single_page_flush_ceiling << PAGE_SHIFT) {
> on_each_cpu(do_flush_tlb_all, NULL, 1);
> } else {
> - struct flush_tlb_info info;
> - info.start = start;
> - info.end = end;
> - on_each_cpu(do_kernel_range_flush, &info, 1);
> + struct flush_tlb_info *info;
> +
> + preempt_disable();
> +
> + info = get_flush_tlb_info(NULL, start, end, 0, false, 0);
> +
> + info = this_cpu_ptr(&flush_tlb_info);
> + info->start = start;
> + info->end = end;
Err.. This is wrong. I will send v3 shortly.
next prev parent reply other threads:[~2019-04-25 19:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-25 18:08 Nadav Amit
2019-04-25 18:50 ` Andy Lutomirski
2019-04-25 19:13 ` Nadav Amit [this message]
2019-04-25 19:29 ` Ingo Molnar
2019-04-25 19:42 ` Nadav Amit
2019-04-25 19:48 ` Ingo Molnar
2019-04-25 21:20 ` Nadav Amit
2019-04-26 7:53 ` Peter Zijlstra
2019-04-26 8:37 ` Nadav Amit
2019-04-26 11:46 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F2218F7E-2011-4AAA-B3A3-F13A1A438204@vmware.com \
--to=namit@vmware.com \
--cc=bp@alien8.de \
--cc=dave.hansen@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®