From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 4 Jan 2003 14:03:06 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 4 Jan 2003 14:03:06 -0500 Received: from f27.law8.hotmail.com ([216.33.241.27]:45839 "EHLO hotmail.com") by vger.kernel.org with ESMTP id ; Sat, 4 Jan 2003 14:03:04 -0500 X-Originating-IP: [24.44.249.150] From: "sean darcy" To: linux-kernel@vger.kernel.org Subject: 2.5.54 ide-scsi and cdrecord Date: Sat, 04 Jan 2003 14:11:32 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 04 Jan 2003 19:11:32.0748 (UTC) FILETIME=[17E52CC0:01C2B425] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org ide-scsi refuses to boot with A NULL pointer oops (is there a patch yet?). But I figured it didn't matter because I could use cdrecord without the scsi layer. So I rebuilt 2.5.54 w/o scsi. Here's the dmesg: ............. VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 6Y120P0, ATA DISK drive hdb: MAXTOR 6L060J3, ATA DISK drive hda: DMA disabled hdb: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SONY CD-RW CRX195E1, ATAPI CD/DVD-ROM drive hdc: DMA disabled ide1 at 0x170-0x177,0x376 on irq 15 spurious 8259A interrupt: IRQ7. hda: host protected area => 1 hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63, UDMA(133) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdb: host protected area => 1 hdb: 117266688 sectors (60041 MB) w/1820KiB Cache, CHS=116336/16/63, UDMA(133) hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 > ........... I got cdrecord 2.0: [root@amd1900 root]# cdrecord -scanbus -dev=ATAPI Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling scsidev: 'ATAPI' devname: 'ATAPI' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. cdrecord: No such device or address. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. FWIW, I also tried just cdrecord -scanbus What am I missing? I thought we didn't need the scsi layer anymore. Here are snips from .config: CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y # IDE chipset support/bugfixes # CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y # # SCSI device support # # CONFIG_SCSI is not set _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963