mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "hua xu" <xuhua18@hotmail.com>
To: linux-kernel@vger.kernel.org
Subject: Problem: do_ioctl() doesn't work well on setting txpower
Date: Wed, 25 Dec 2002 17:11:36 +0000	[thread overview]
Message-ID: <F89pcnvy3JdZZzxTS2U0001dbed@hotmail.com> (raw)

       I have a problem on setting txpower in the kernel module, and I wish 
to be personally CC'ed the answers/comments posted to the list in response. 

       It is the first time for me to make a kernel module in order to 
manage txpower.I am using Vine Linux 2.4.18-0v13 and wireless LAN card is 
CISCO AIRONET 350 whose txpower can be change in 3 levels.  Following is my 
problem in the kernel programming.
	With CISCO LAN card, I can change the txpower by the command: iwconfig, 
however, in my kernel programming, I am using do_ioctl() intending to set 
txpower. There are two aspects on my problem. One aspect is that when I set 
wrq.u.txpower.value which I am intended to change, and do the do_ioctl(). 
After complying the kernel module, the wireless LAN card just turned off 
its txpower but the value is not changed. Then when I set 
wrq.u.txpower.diabled trying to keep txpower on, I got the error message (I 
am using 兎rrno\xC7\x01and the result is \xCB\x132). On the other hand, in my 
programming, I can set bitrate without any problem and can also get the 
txpower and bitrate information using do_ioctl(). I have tried to set 
wrq.u.data.pointer, wrq.u.data.length, and wrq.u.data.flags and used 
different values for the setting of txpower parameters, but they seemed no 
effect. 
         Is there any clue for solving my problem ? I would very appreciate 
for any help.
 	Following is the parts of my programming:

int set_txpower()
{
    int errno;
    mm_segment_t oldfs;
    struct interface_list_entry *dest_interface;
    struct net_device *dev;
    struct iwreq		wrq;

      strncpy(wrq.ifr_name,dest_interface->dev->name,IFNAMSIZ);       
      
	//the part of setting  the tx power		
			wrq.u.txpower.value= 1;           
                            wrq.u.txpower.disabled=0;
	                oldfs = get_fs();                         
                         set_fs(KERNEL_DS);
                         
errno=dest_interface->dev->do_ioctl(dest_interface->dev, (struct ifreq * ) 
&wrq,SIOCSIWTXPOW);
                         set_fs(oldfs);
                         if(errno<0)
                        { printk( "Error with SIOCSIWTXPOW\n");
			  printk("ERRNO: %d \n",errno);
                           }
                       else
   			printk("setting is OK\n\n");

      //the part of setting bitrate and it works without any problem//
	wrq.u.bitrate.value= 1;                   	
	 oldfs = get_fs();                      
         set_fs(KERNEL_DS);
         errno=dest_interface->dev->do_ioctl(dest_interface->dev, (struct 
ifreq * ) &wrq,SIOCSIWRATE);
         set_fs(oldfs);
}


_________________________________________________________________
会員登録は無料  充実した出品アイテムなら MSN オークション  
http://auction.msn.co.jp/ 


                 reply	other threads:[~2002-12-25 17:11 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=F89pcnvy3JdZZzxTS2U0001dbed@hotmail.com \
    --to=xuhua18@hotmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®