I noticed that lots of printk() have no loglevel tag on them, bringing them down to loglevel 4. This results in many spurious messages when a loglevel below 7 is selected. Here's a tiny patch for a couple of "PCI: Enabling device" messages, which I chose because there IS one of them with a KERN_INFO tag: ### linux-2.5.16/arch/sh/kernel/pcibios.c:97: printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", dev->name, old_cmd, cmd); ### so - I thought - why others shouldn't have it? They ARE informational messages! So here's the patch against 2.4.16. If it will be included, I will fix up some others... -- icemaze@tiscalinet.it