From: Chen Wang <unicorn_wang@outlook.com>
To: Alexander Sverdlin <alexander.sverdlin@gmail.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jingbao Qiu <qiujingbao.dlmu@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Yangyu Chen <cyy@cyyself.name>,
linux-kernel@vger.kernel.org, sophgo@lists.linux.dev,
devicetree@vger.kernel.org, linux-rtc@vger.kernel.org,
Inochi Amaoto <inochiama@gmail.com>
Subject: Re: [PATCH v14 3/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC
Date: Mon, 14 Apr 2025 17:14:28 +0800 [thread overview]
Message-ID: <MA0P287MB22628A1AF7C3B2DAAE837CE3FEB32@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <PN0PR01MB103935B34205CB22313838F34FED92@PN0PR01MB10393.INDPRD01.PROD.OUTLOOK.COM>
Hi, Alexander Sverdlin,
I just find there is an exiting "REAL TIME CLOCK (RTC) SUBSYSTEM"
section in MAINTAINERS, seems we should not pick the rtc file in "SOPHGO
DEVICETREES and DRIVERS".
Chen
On 2025/3/19 8:31, Chen Wang wrote:
> Hi, Inochi,
>
> I see Alexander add "drivers/rtc/rtc-cv1800.c" in "SOPHGO DEVICETREES
> and DRIVERS" of MAINTAINERS, would you like to take this?
>
> Regards,
>
> Chen
>
> On 2025/3/16 6:49, Alexander Sverdlin wrote:
>> From: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
>>
>> Implement the RTC driver for CV1800, which able to provide time alarm.
>>
>> Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
>> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
>> ---
>> Changelog:
>> v14:
>> - platform device name "cv1800-rtc" -> "cv1800b-rtc"
>> v13:
>> - Change in the Kconfig dependency caused by the move of the previous
>> patch from MFD into SOC
>> v12:
>> - added MAINTAINERS entry
>> - depends on cv1800-rtcsys MFD driver
>> - use syscon for regmap
>> - get named clock from parent MFD
>> - corresponding platform device is expected to be instantiated by MFD
>> stub
>> Changes since v10:
>> - only start RTC on set_time;
>> Changes since v9:
>> - further simplified bitmask macros;
>> - unconditional RTC start (rtc_enable_sec_counter()), otherwise
>> didn't start on SG2000;
>> - dropped ANA_CALIB modification (has been forgotten in v8 with
>> the drop of SW calibration to switch to HW calibration);
>> - successfully tested on SG2000;
>>
>>
>> MAINTAINERS | 1 +
>> drivers/rtc/Kconfig | 12 +++
>> drivers/rtc/Makefile | 1 +
>> drivers/rtc/rtc-cv1800.c | 218 +++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 232 insertions(+)
>> create mode 100644 drivers/rtc/rtc-cv1800.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index ac15e448fffb..be8fee50a49c 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -22354,6 +22354,7 @@ L: sophgo@lists.linux.dev
>> W: https://github.com/sophgo/linux/wiki
>> T: git https://github.com/sophgo/linux.git
>> S: Maintained
>> +F: drivers/rtc/rtc-cv1800.c
>> N: sophgo
>> K: sophgo
>
> [......]
>
>
>
next prev parent reply other threads:[~2025-04-14 9:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-15 22:49 [PATCH v14 0/3] rtc: sophgo: add rtc support for CV1800 Alexander Sverdlin
2025-03-15 22:49 ` [PATCH v14 1/3] dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series Alexander Sverdlin
2025-04-10 5:45 ` Inochi Amaoto
2025-03-15 22:49 ` [PATCH v14 2/3] soc: sophgo: cv1800: rtcsys: New driver (handling RTC only) Alexander Sverdlin
2025-04-10 5:44 ` Inochi Amaoto
2025-03-15 22:49 ` [PATCH v14 3/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC Alexander Sverdlin
2025-03-19 0:31 ` Chen Wang
2025-03-19 0:43 ` Inochi Amaoto
2025-04-14 9:14 ` Chen Wang [this message]
2025-05-07 0:41 ` (subset) [PATCH v14 0/3] rtc: sophgo: add rtc support for CV1800 Inochi Amaoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MA0P287MB22628A1AF7C3B2DAAE837CE3FEB32@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM \
--to=unicorn_wang@outlook.com \
--cc=alexander.sverdlin@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=cyy@cyyself.name \
--cc=devicetree@vger.kernel.org \
--cc=inochiama@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=qiujingbao.dlmu@gmail.com \
--cc=robh@kernel.org \
--cc=sophgo@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®