Re: [PATCH v2 0/3] irqchip/sg2042-msi: Set irq type according to DT configuration

[Chen Wang <unicorn_wang@outlook.com>]

Hi, Thomas,

Would you please pick this patchset?

P.S. Since the modification of the DTS part is closely dependent on the 
modification of the driver part, I am not sure whether you are willing 
to pick these three patches together, or just pick the driver part and 
leave the DTS part to me?

Thanks,

Chen

On 8/26/2025 9:09 AM, Chen Wang wrote:
> From: Chen Wang <unicorn_wang@outlook.com>
>
> The original MSI interrupt type was hard-coded, which was not a good idea.
> Now it is changed to read the device tree configuration and then set the
> interrupt type.
>
> This patchset is based on irq/drivers branch of tip.
>
> ---
>
> Changes in v2:
>    The patch series is based on irq/drivers branch of tip.
>
>    Reverted the change to obtain params of "msi-ranges"; it's better not to
>    assume the value of "#interrupt-cells" is 2, even though it's known to be
>    the case. Thanks to Inochi for the comments.
>
> Changes in v1:
>    The patch series is based on irq/drivers branch of tip. You can simply review
>    or test the patches at the link [1].
>
> Link: https://lore.kernel.org/linux-riscv/cover.1756103516.git.unicorn_wang@outlook.com/ [1]
> ---
>
> Chen Wang (3):
>    irqchip/sg2042-msi: Set irq type according to DT configuration
>    riscv: sophgo: dts: sg2042: change msi irq type to
>      IRQ_TYPE_EDGE_RISING
>    riscv: sophgo: dts: sg2044: change msi irq type to
>      IRQ_TYPE_EDGE_RISING
>
>   arch/riscv/boot/dts/sophgo/sg2042.dtsi | 2 +-
>   arch/riscv/boot/dts/sophgo/sg2044.dtsi | 2 +-
>   drivers/irqchip/irq-sg2042-msi.c       | 7 +++++--
>   3 files changed, 7 insertions(+), 4 deletions(-)
>
>
> base-commit: 8ff1c16c753e293c3ba20583cb64f81ea7b9a451